Home > Fujitsu > Controller > Fujitsu Series 3 Manual

Fujitsu Series 3 Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Fujitsu Series 3 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1384
    							 
    4. Register List 
     
    [bit17:16] SIN2S : SIN2S Input Select Bit Selects input for SIN2. 
    bit17:16 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SIN2_0 at the input pin of MFS-ch2-SIN. [Initial value] 
    Writing 01  Same as Writing 00. 
    Writing 10 Uses SIN2_1 at the input pin of MFS-ch2-SIN. 
    Writing 11 Uses SIN2_2 at the input pin of MFS-ch2-SIN. 
     
    [bit15:14] SCK1B : SCK1  Input/Output Select Bit 
    Selects input/output for SCK1. 
    bit15:14 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SCK1_0 at the input pin of MFS-ch1-SCK. 
    Does not produce output. [Initial value] 
    Writing 01 Uses SCK1_0 at the input pin of MFS-ch1-SCK.   
    Uses SCK1_0 at the output pin.   
    Writing 10 Uses SCK1_1 at the input pin of MFS-ch1-SCK.   
    Uses SCK1_1 at the output pin.   
    Writing 11 Uses SCK1_2 at the input pin of MFS-ch1-SCK.   
    Uses SCK1_2 at the output pin.   
     
    [bit13:12] SOT1B : SOT1B Input/Output Select Bit  Selects input/output for SOT1. 
    bit13:12 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SOT1_0 at the input pin of MFS-ch1-SOT. 
    Does not produce output. [Initial value] 
    Writing 01 Uses SOT1_0 at the input pin of MFS-ch1-SOT.   
    Uses SOT1_0 at the output pin.   
    Writing 10 Uses SOT1_1 at the input pin of MFS-ch1-SOT.   
    Uses SOT1_1 at the output pin. 
    Writing 11 Uses SOT1_2 at the input pin of MFS-ch1-SOT. 
    Uses SOT1_2 at the output pin. 
     
    [bit11:10] SIN1S : SIN1S Input Select Bit  Selects input for SIN1. 
    bit11:10 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SIN1_0 at the input pin of MFS-ch1-SIN. [Initial value] 
    Writing 01  Same as Writing 00. 
    Writing 10 Uses SIN1_1 at the input pin of MFS-ch1-SIN. 
    Writing 11 Uses SIN1_2 at the input pin of MFS-ch1-SIN. 
     
    FUJITSU SEMICONDUCTOR LIMITED 
    CHAPTER  9: I/O  PORT 
    MN706-00002-1v0-E 
    275 
    MB9Axxx/MB9Bxxx  Series  
    						
    							 
    4. Register List 
     
    [bit9:8] SCK0B : SCK0 Input/Output Select Bit Selects input/output for SCK0. 
    bit9:8 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SCK0_0 at the input pin of MFS-ch0-SCK.   
    Does not produce output. [Initial value] 
    Writing 01 Uses SCK0_0 at the input pin of MFS-ch0-SCK.   
    Uses SCK0_0 at the output pin. 
    Writing 10 Uses SCK0_1 at the input pin of MFS-ch0-SCK.   
    Uses SCK0_1 at the output pin.   
    Writing 11 Uses SCK0_2 at the input pin of MFS-ch0-SCK.   
    Uses SCK0_2 at the output pin. 
     
    [bit7:6] SOT0B : SOT0B Input/Output Select Bit  Selects input/output for SOT0. 
    bit7:6 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SOT0_0 at the input pin of MFS-ch0-SOT.   
    Does not produce output. [Initial value] 
    Writing 01 Uses SOT0_0 at the input pin of MFS-ch0-SOT.   
    Uses SOT0_0 at the output pin.   
    Writing 10 Uses SOT0_1 at the input pin of MFS-ch0-SOT.   
    Uses SOT0_1 at the output pin.   
    Writing 11 Uses SOT0_2 at the input pin of MFS-ch0-SOT.   
    Uses SOT0_2 at the output pin.   
     
    [bit5:4] SIN0S : SIN0S Input Select Bit  Selects input for SIN0. 
    bit5:4 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SIN0_0 at the input pin of MFS-ch0-SIN. [Initial value] 
    Writing 01  Same as Writing 00. 
    Writing 10 Uses SIN0_1 at the input pin of MFS-ch0-SIN. 
    Writing 11 Uses SIN0_2 at the input pin of MFS-ch0-SIN. 
     
    [bit3:0] res : Reserved Bit  0b0000 is read from these bits.   
    When writing these bits, set them to 0b0000.   
    FUJITSU SEMICONDUCTOR LIMITED 
    CHAPTER  9: I/O  PORT 
    MN706-00002-1v0-E 
    276 
    MB9Axxx/MB9Bxxx  Series  
    						
    							 
    4. Register List 
     
    4.15.  Extended Pin Function Setting Register 08 (EPFR08) 
    The EPFR08 register assigns functions of multi-function serial channel 4, channel 5, channel6, 
    and channel 7.   
     Register Configuration 
    bit  31 30 29  28 27 26 25 24 
    Field reserved  SCK7B SOT7B 
    Attribute -  R/W R/W 
    Initial value  - 2’b00 2’b00 
               
    bit  23 22 21  20 19 18 17 16 
    Field SIN7S  SCK6B SOT6B  SIN6S 
    Attribute R/W  R/W R/W R/W 
    Initial value  2’b00  2’b00 2’b00 2’b00 
               
    bit  15 14 13  12 11 10  9 8 
    Field SCK5B  SOT5B SIN5S SCK4B 
    Attribute R/W  R/W R/W R/W 
    Initial value  2’b00  2’b00 2’b00 2’b00 
               
    bit  7 6 5  4 3 2 1 0 
    Field SOT4B  SIN4S CTS4S  RTS4E 
    Attribute R/W  R/W R/W R/W 
    Initial value  2’b00  2’b00 2’b00 2’b00 
     Register Function 
    [bit31:28] res : Reserved Bit 
    0b0000 is read from these bits.   
    When writing these bits, set them to 0b0000.   
    [bit27:26] SCK7B : SCK7  Input/Output Select Bit 
    Selects input/output for SCK7. 
    bit27:26 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SCK7_0 at the input pin of MFS-ch7-SCK. 
    Does not produce output. [Initial value] 
    Writing 01 Uses SCK7_0 at the input pin of MFS-ch7-SCK. 
    Uses SCK7_0 at the output pin. 
    Writing 10 Uses SCK7_1 at the input pin of MFS-ch7-SCK. 
    Uses SCK7_1 at the output pin.   
    Writing 11 Uses SCK7_2 at the input pin of MFS-ch7-SCK. 
    Uses SCK7_2 at the output pin. 
     
    FUJITSU SEMICONDUCTOR LIMITED 
    CHAPTER  9: I/O  PORT 
    MN706-00002-1v0-E 
    277 
    MB9Axxx/MB9Bxxx  Series  
    						
    							 
    4. Register List 
     
    [bit25:24] SOT7B : SOT7B Input/Output Select Bit Selects input/output for SOT7. 
    bit25:24 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SOT7_0 at the input pin of MFS-ch7-SOT.   
    Does not produce output. [Initial value] 
    Writing 01 Uses SOT7_0 at the input pin of MFS-ch7-SOT.   
    Uses SOT7_0 at the output pin.   
    Writing 10 Uses SOT7_1 at the input pin of MFS-ch7-SOT.   
    Uses SOT7_1 at the output pin.   
    Writing 11 Uses SOT7_2 at the input pin of MFS-ch7-SOT.   
    Uses SOT7_2 at the output pin.   
     
    [bit23:22] SIN7S : SIN7S Input Select Bit  Selects input for SIN7. 
    bit23:22 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SIN7_0 at the input pin of MFS-ch7-SIN. [Initial value] 
    Writing 01  Same as Writing 00. 
    Writing 10 Uses SIN7_1 at the input pin of MFS-ch7-SIN. 
    Writing 11 Uses SIN7_2 at the input pin of MFS-ch7-SIN.   
     
    [bit21:20] SCK6B : SCK6  Input/Output Select Bit 
    Selects input/output for SCK6. 
    bit21:20 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SCK6_0 at the input pin of MFS-ch6-SCK.   
    Does not produce output. [Initial value] 
    Writing 01 Uses SCK6_0 at the input pin of MFS-ch6-SCK.   
    Uses SCK6_0 at the output pin.   
    Writing 10 Uses SCK6_1 at the input pin of MFS-ch6-SCK.   
    Uses SCK6_1 at the output pin.   
    Writing 11 Uses SCK6_2 at the input pin of MFS-ch6-SCK.   
    Uses SCK6_2 at the output pin.   
     
    [bit19:18] SOT6B : SOT6B Input/Output Select Bit  Selects input/output for SOT6. 
    bit19:18 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SOT6_0 at the input pin of MFS-ch6-SOT. 
    Does not produce output. [Initial value] 
    Writing 01 Uses SOT6_0 at the input pin of MFS-ch6-SOT.   
    Uses SOT6_0 at the output pin.   
    Writing 10 Uses SOT6_1 at the input pin of MFS-ch6-SOT.   
    Uses SOT6_1 at the output pin.   
    Writing 11 Uses SOT6_2 at the input pin of MFS-ch6-SOT. 
    Uses SOT6_2 at the output pin. 
     
    FUJITSU SEMICONDUCTOR LIMITED 
    CHAPTER  9: I/O  PORT 
    MN706-00002-1v0-E 
    278 
    MB9Axxx/MB9Bxxx  Series  
    						
    							 
    4. Register List 
     
    [bit17:16] SIN6S : SIN6S Input Select Bit Selects input for SIN6. 
    bit17:16 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SIN6_0 at the input pin of MFS-ch6-SIN. [Initial value] 
    Writing 01  Same as Writing 00. 
    Writing 10 Uses SIN6_1 at the input pin of MFS-ch6-SIN. 
    Writing 11 Uses SIN6_2 at the input pin of MFS-ch6-SIN. 
     
    [bit15:14] SCK5B : SCK5  Input/Output Select Bit 
    Selects input/output for SCK5. 
    bit15:14 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SCK5_0 at the input pin of MFS-ch5-SCK.   
    Does not produce output. [Initial value] 
    Writing 01 Uses SCK5_0 at the input pin of MFS-ch5-SCK.   
    Uses SCK5_0 at the output pin.   
    Writing 10 Uses SCK5_1 at the input pin of MFS-ch5-SCK.   
    Uses SCK5_1 at the output pin.   
    Writing 11 Uses SCK5_2 at the input pin of MFS-ch5-SCK.   
    Uses SCK5_2 at the output pin.   
     
    [bit13:12] SOT5B : SOT5B Input/Output Select Bit  Selects input/output for SOT5. 
    bit13:12 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SOT5_0 at the input pin of MFS-ch5-SOT.   
    Does not produce output. [Initial value] 
    Writing 01 Uses SOT5_0 at the input pin of MFS-ch5-SOT. 
    Uses SOT5_0 at the output pin.   
    Writing 10 Uses SOT5_1 at the input pin of MFS-ch5-SOT. 
    Uses SOT5_1 at the output pin.   
    Writing 11 Uses SOT5_2 at the input pin of MFS-ch5-SOT.   
    Uses SOT5_2 at the output pin. 
     
    [bit11:10] SIN5S : SIN5S Input Select Bit  Selects input for SIN5. 
    bit11:10 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SIN5_0 at the input pin of MFS-ch5-SIN. [Initial value] 
    Writing 01  Same as Writing 00. 
    Writing 10 Uses SIN5_1 at the input pin of MFS-ch5-SIN. 
    Writing 11 Uses SIN5_2 at the input pin of MFS-ch5-SIN. 
     
    FUJITSU SEMICONDUCTOR LIMITED 
    CHAPTER  9: I/O  PORT 
    MN706-00002-1v0-E 
    279 
    MB9Axxx/MB9Bxxx  Series  
    						
    							 
    4. Register List 
     
    [bit9:8] SCK4B : SCK4 Input/Output Select Bit Selects input/output for SCK4. 
    bit9:8 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SCK4_0 at the input pin of MFS-ch4-SCK. 
    Does not produce output. [Initial value] 
    Writing 01 Uses SCK4_0 at the input pin of MFS-ch4-SCK.   
    Uses SCK4_0 at the output pin.   
    Writing 10 Uses SCK4_1 at the input pin of MFS-ch4-SCK.   
    Uses SCK4_1 at the output pin.   
    Writing 11 Uses SCK4_2 at the input pin of MFS-ch4-SCK.   
    Uses SCK4_2 at the output pin. 
     
    [bit7:6] SOT4B : SOT4B Input/Output Select Bit  Selects input/output for SOT4. 
    bit7:6 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SOT4_0 at the input pin of MFS-ch4-SOT.   
    Does not produce output. [Initial value] 
    Writing 01 Uses SOT4_0 at the input pin of MFS-ch4-SOT. 
    Uses SOT4_0 at the output pin. 
    Writing 10 Uses SOT4_1 at the input pin of MFS-ch4-SOT.   
    Uses SOT4_1 at the output pin.   
    Writing 11 Uses SOT4_2 at the input pin of MFS-ch4-SOT.   
    Uses SOT4_2 at the output pin.   
     
    [bit5:4] SIN4S : SIN4S Input Select Bit  Selects input for SIN4. 
    bit5:4 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses SIN4_0 at the input pin of MFS-ch4-SIN. [Initial value] 
    Writing 01  Same as Writing 00. 
    Writing 10 Uses SIN4_1 at the input pin of MFS-ch4-SIN. 
    Writing 11 Uses SIN4_2 at the input pin of MFS-ch4-SIN. 
     
    [bit3:2] CTS4S : CTS4S Input Select Bit  Selects input for CTS4. 
    bit3:2 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses CTS4_0 at the input  pin of MFS-ch4-CTS. [Initial value] 
    Writing 01 Same as Writing 00. 
    Writing 10 Uses CTS4_1 at th e input pin of MFS-ch4-CTS. 
    Writing 11 Uses CTS4_2 at th e input pin of MFS-ch4-CTS. 
     
    FUJITSU SEMICONDUCTOR LIMITED 
    CHAPTER  9: I/O  PORT 
    MN706-00002-1v0-E 
    280 
    MB9Axxx/MB9Bxxx  Series  
    						
    							 
    4. Register List 
     
    [bit1:0] RTS4E : RTS4E Output Select Bit Selects output for RTS4. 
    bit1:0 Description 
    Reading  Reads out the register value. 
    Writing 00  Does not produce output for MFS-ch4-RTS. [Initial value] 
    Writing 01  Uses RTS4_0 at the output pin of MFS-ch4-RTS. 
    Writing 10 Uses RTS4_1 at the output pin of MFS-ch4-RTS. 
    Writing 11 Uses RTS4_2 at the output pin of MFS-ch4-RTS. 
     
    FUJITSU SEMICONDUCTOR LIMITED 
    CHAPTER  9: I/O  PORT 
    MN706-00002-1v0-E 
    281 
    MB9Axxx/MB9Bxxx  Series  
    						
    							 
    4. Register List 
     
    4.16.  Extended Pin Function Setting Register 09 (EPFR09) 
    The EPFR09 register assigns functions to CAN, ADC trigger, and QPRC peripheral pins.   
     Register Configuration 
    bit  31 30 29  28 27 26 25 24 
    Field  CTX1E CRX1S CTX0E  CRX0S 
    Attribute R/W  R/W R/W R/W 
    Initial value  2’b00  2’b00 2’b00 2’b00 
               
    bit  23 22 21  20 19 18 17 16 
    Field ADTRG2S  ADTRG1S 
    Attribute R/W  R/W 
    Initial value 4’b0000  4’b0000 
               
    bit  15 14 13  12 11 10  9 8 
    Field ADTRG0S  QZIN1S QBIN1S 
    Attribute R/W  R/W R/W 
    Initial value  4’b0000  2’b00 2’b00 
               
    bit  7 6 5  4 3 2 1 0 
    Field QAIN1S  QZIN0S QBIN0S QAIN0S 
    Attribute R/W  R/W R/W R/W 
    Initial value  2’b00  2’b00 2’b00 2’b00 
     Register Function 
    [bit31:30] CTX1E : CTX1E Output Select Bit 
    Selects output for CAN TX1. 
    bit31:30 Description 
    Reading  Reads out the register value. 
    Writing 00  Does not produce output for CAN-ch1-TX. [Initial value] 
    Writing 01 Sets the output pi n of CAN-ch1-TX  to TX1_0. 
    Writing 10 Sets the output pi n of CAN-ch1-TX  to TX1_1. 
    Writing 11 Sets the output pi n of CAN-ch1-TX  to TX1_2. 
     
    [bit29:28] CRX1S : CRX1S Input Select Bit  Selects input for CAN RX1. 
    bit29:28 Description 
    Reading  Reads out the register value. 
    Writing 00  Sets the input pin of CAN-ch1-RX to RX1_0. [Initial value] 
    Writing 01  Same as Writing 00. 
    Writing 10  Sets the input pin of CAN-ch1-RX to RX1_1. 
    Writing 11 Sets the input pin of CAN-ch1-RX to RX1_2. 
     
    FUJITSU SEMICONDUCTOR LIMITED 
    CHAPTER  9: I/O  PORT 
    MN706-00002-1v0-E 
    282 
    MB9Axxx/MB9Bxxx  Series  
    						
    							 
    4. Register List 
     
    [bit27:26] CTX0E : CTX0E Output Select Bit Selects output for CAN TX0. 
    bit27:26 Description 
    Reading  Reads out the register value. 
    Writing 00  Does not produce output for CAN-ch0-TX. [Initial value] 
    Writing 01 Sets the output pi n of CAN-ch0-TX  to TX0_0. 
    Writing 10 Sets the output pi n of CAN-ch0-TX  to TX0_1. 
    Writing 11 Sets the output pi n of CAN-ch0-TX  to TX0_2. 
     
    [bit25:24] CRX0S : CRX0S Input Select Bit  Selects input for CAN RX0. 
    bit25:24 Description 
    Reading  Reads out the register value. 
    Writing 00  Sets the input pin of CAN-ch0-RX to RX0_0. [Initial value] 
    Writing 01  Same as Writing 00. 
    Writing 10  Sets the input pin of CAN-ch0-RX to RX0_1. 
    Writing 11 Sets the input pin of CAN-ch0-RX to RX0_2. 
     
    [bit23:20] ADTRG2S  : ADTR G2 Input Select Bit 
    Selects input for ADTRG2. 
    bit23:20 Description 
    Reading  Reads out the register value. 
    Writing 0000  Uses ADTG_0 at the input pin of AD C unit 2’s startup trigger. [Initial value] 
    Writing 0001 Same as Writing 0000. 
    Writing 0010 Uses ADTG_1 at the input pin of ADC unit 2’s startup trigger. 
    Writing 0011 Uses ADTG_2 at the input pin of ADC unit 2’s startup trigger. 
    Writing 0100  Uses ADTG_3 at the input pin of ADC unit 2’s startup trigger. 
    Writing 0101 Uses ADTG_4 at the input pin of ADC unit 2’s startup trigger. 
    Writing 0110 Uses ADTG_5 at the input pin of ADC unit 2’s startup trigger. 
    Writing 0111 Uses ADTG_6 at the input  pin of ADC unit 2’s startup trigger. 
    Writing 1000 Uses ADTG_7 at the input pin of ADC unit 2’s startup trigger. 
    Writing 1001 Uses ADTG_8 at the input pin of ADC unit 2’s startup trigger. 
    Writing other data  Setting disabled. 
     
    FUJITSU SEMICONDUCTOR LIMITED 
    CHAPTER  9: I/O  PORT 
    MN706-00002-1v0-E 
    283 
    MB9Axxx/MB9Bxxx  Series  
    						
    							 
    4. Register List 
     
    [bit19:16] ADTRG1S  : ADTRG1 Input Select Bit 
    Selects input for ADTRG1. 
    bit19:16 Description 
    Reading  Reads out the register value. 
    Writing 0000  Uses ADTG_0 at the input pin of AD C unit 1’s startup trigger. [Initial value] 
    Writing 0001 Same as Writing 0000. 
    Writing 0010 Uses ADTG_1 at the input pin of ADC unit 1’s startup trigger. 
    Writing 0011 Uses ADTG_2 at the input pin of ADC unit 1’s startup trigger. 
    Writing 0100  Uses ADTG_3 at the input pin of ADC unit 1’s startup trigger. 
    Writing 0101 Uses ADTG_4 at the input pin of ADC unit 1’s startup trigger. 
    Writing 0110 Uses ADTG_5 at the input pin of ADC unit 1’s startup trigger. 
    Writing 0111 Uses ADTG_6 at the input  pin of ADC unit 1’s startup trigger. 
    Writing 1000 Uses ADTG_7 at the input pin of ADC unit 1’s startup trigger. 
    Writing 1001 Uses ADTG_8 at the input pin of ADC unit 1’s startup trigger. 
    Writing other data  Setting disabled. 
     
    [bit15:12] ADTRG0S  : ADTR G0 Input Select Bit 
    Selects input for ADTRG0. 
    bit15:12 Description 
    Reading  Reads out the register value. 
    Writing 0000  Uses ADTG_0 at the input pin of AD C unit 0’s startup trigger. [Initial value] 
    Writing 0001 Same as Writing 0000. 
    Writing 0010 Uses ADTG_1 at the input pin of ADC unit 0’s startup trigger. 
    Writing 0011 Uses ADTG_2 at the input pin of ADC unit 0’s startup trigger. 
    Writing 0100  Uses ADTG_3 at the input pin of ADC unit 0’s startup trigger. 
    Writing 0101 Uses ADTG_4 at the input pin of ADC unit 0’s startup trigger. 
    Writing 0110 Uses ADTG_5 at the input pin of ADC unit 0’s startup trigger. 
    Writing 0111 Uses ADTG_6 at the input pin of ADC unit 0’s startup trigger.   
    Writing 1000  Uses ADTG_7 at the input pin of ADC unit 0’s startup trigger. 
    Writing 1001 Uses ADTG_8 at the input pin of ADC unit 0’s startup trigger. 
    Writing other data  Setting disabled. 
     
    [bit11:10] QZIN1S : QZIN1S Input Select Bit  Selects input for QPRC ZIN1. 
    bit11:10 Description 
    Reading  Reads out the register value. 
    Writing 00  Uses ZIN1_0 at the input pin of QPRC-ch1’s ZIN. [Initial value] 
    Writing 01  Same as Writing 00. 
    Writing 10 Uses ZIN1_1 at the input pin of QPRC-ch1’s ZIN. 
    Writing 11 Uses ZIN1_2 at the input pin of QPRC-ch1’s ZIN. 
     
    FUJITSU SEMICONDUCTOR LIMITED 
    CHAPTER  9: I/O  PORT 
    MN706-00002-1v0-E 
    284 
    MB9Axxx/MB9Bxxx  Series  
    						
    All Fujitsu manuals Comments (0)