Fujitsu Series 3 Manual

MN706-00002-1v0-E FUJITSU SEMICONDUCTOR 
CONTRO

LLER MANUAL 
 
 
 
  
FUJ ITSU

 SEMICONDUCTOR CONFIDENTIAL 
 
 
 
 
 
 
FM3 
32-BIT MICROCONTROLLER 
MB9Axxx / MB9Bxxx Series 
PERIPHERAL MANUAL 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
For the information for microcontroller supports, see the following web site. 
 
http://edevice.fujitsu.com/micom/en-support/ 
 
 
 
 
 
FUJITSU SEMICONDUCTOR LIMITED 
  

 
 
 
 FUJITSU SEMICON

DUCTOR LIMITED  

FUJITSU SEMICONDUCTOR LIMITED 
Preface 
 
 
Thank you for your continued use of Fujitsu semiconductor products. 
Read this manual and Data Sheet thoroughly  before using products in this series. 
 
 Purpose of this manual and intended readers 
This manual explains the functions and operations of this series and describes how it is used. The manual is 
intended for engineers engaged in the actual development of products using this series. 
*  This manual explains the architecture and operation of the...

FUJITSU SEMICONDUCTOR LIMITED 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 The contents of this document are  subject to change without notice. 
Customers are advised to consult with  sales representatives before ordering. 
 The information, such as descriptions of function and application circuit examples, in this document are presented 
solely for the purpose of reference to show examples of oper ations and uses of FUJITSU SEMICONDUCTOR device; 
FUJITSU SEMICONDUCTOR does not warrant...

FUJITSU SEMICONDUCTOR LIMITED 
Related Manuals 
 
 
The manuals related to this series are listed below. See the manual appropriate to the applicable 
conditions. 
The contents of these manuals are subject to change without notice. Contact us to check the latest 
versions available. 
 
 Peripheral Manual 
  FM3 FAMILY MB9Axxx / MB9Bxxx SERIES PERIPHERAL MANUAL (this manual) 
 
  Data sheet 
For details about device-specific, el ectrical characteristics, package dime nsions, ordering information etc.,...

 
 
 FUJITSU SEMICONDUCTOR LIMITED 
 
FUJITSU SEMICONDUCTOR CONFIDENTIAL  iv 
How to Use This Manual 
 
 
  Finding a function 
The following methods can be used to search for the explanation of a desired function in this manual: 
  Search from the table of the contents 
The table of the contents lists the manual contents in the order of description. 
   Search from the register 
The address where each register is located is not descri bed in the text. To verify the address of a register, 
see...

 
 
 
CONTENTS 
CHAPTER 1: System Overview ........................................................................\
.....................1 
1. Bus Architecture ........................................................................\
.................................... ....2 
1.1. Bus Block Diagram................................................................\
......................................... .4 
2. Memory Architecture ........................................................................\...

 
 
 
CHAPTER 2-2: High-Speed CR Trimming ........................................................................\
...49 
1. High-Speed CR Trimming Function Overview .................................................................50 
2. High-Speed CR Trimming Function  Configuration and Block Diagram............................51 
3. High-Speed CR Trimming Function Oper ation ................................................................52 
4. High-Speed CR Trimming Function Setup Procedur e Example...

 
 
 
CHAPTER 6: Interrupts ........................................................................\
..............................125 
1. Overview ........................................................................\
...............................................126 
2. Stru cture ........................................................................\
........................................... .....127 
3. Exception and Inte rrupt...

 
 
 
CHAPTER 8: DMAC........................................................................\
...................................181 
1. Overview of DMAC ........................................................................\
................................ 182 
2. Configuration of DM AC......................................................................\
............................183 
2.1. DMAC and System Configur ation ........................................................................\...