Home > Fujitsu > Controller > Fujitsu Series 3 Manual

Fujitsu Series 3 Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Fujitsu Series 3 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1384
    Add page 291 to Favourites
    image text
    Enable zoom 
    							 
4. Register List 
 
[bit19:18] FRCK0S : FRCK0 Input Select Bit Selects input for FRCK0. 
bit19:18 Description 
Reading  Reads out the register value. 
Writing 00  Uses FRCK0_0 at the input pin of  the free-run timer FRCK0. [Initial value] 
Writing 01 Same as Writing 00. 
Writing 10 Uses FRCK0_1 at the inpu t pin of the free-run timer FRCK0. 
Writing 11 Setting is prohibited. 
 
[bit17:16] DTTI0S : DTTIX0 Input Select Bit  Selects input for DTTIX0. 
bit17:16 Description 
Reading  Reads out the register value. 
Writing 00  Uses DTTIX0_0 at the input pin of the waveform generator DTTIX0. [Initial value] 
Writing 01  Same as Writing 00. 
Writing 10  Uses DTTIX0_1 at the input pin of the waveform generator DTTIX0. 
Writing 11 Setting is prohibited. 
 
[bit15:13] res : Reserved Bit  0b000 is read out from these bits. 
When writing these bits, set them to 0b000. 
[bit12] DTTI0C : DTTIX0  Function Select Bit 
Selects a function for DTTIX0. 
bit Description 
Reading  Reads out the register value. 
Writing 0  Does not switch GPIO by DTTIF0 for output of pins RTO00 to RTO05. [Initial value]
Writing 1  Switches GPIO by DTTIF0 for output of pins RTO00 to RTO05. 
 
[bit11:10] RTO05E : RTO05E Output Select Bit  Selects output for RTO05. 
bit11:10 Description 
Reading  Reads out the register value. 
Writing 00  Does not produce output for the waveform generator RTO05. [Initial value] 
Writing 01 Uses RTO05_0 at the output pin of the waveform generator RTO05. 
Writing 10 Uses RTO05_1 at the output pin of the waveform generator RTO05. 
Writing 11 Setting is prohibited. 
 
FUJITSU SEMICONDUCTOR LIMITED 
CHAPTER  9: I/O  PORT 
MN706-00002-1v0-E 
255 
MB9Axxx/MB9Bxxx  Series
    Add page 292 to Favourites
    image text
    Enable zoom 
    							 
4. Register List 
 
[bit9:8] RTO04E : RTO04E Output Select Bit Selects output for RTO04. 
bit9:8 Description 
Reading  Reads out the register value. 
Writing 00  Does not produce output for the waveform generator RTO04. [Initial value] 
Writing 01 Uses RTO04_0 at the output pin of the waveform generator RTO04. 
Writing 10 Uses RTO04_1 at the output pin of the waveform generator RTO04. 
Writing 11 Setting is prohibited. 
 
[bit7:6] RTO03E : RTO03E Output Select Bit  Selects output for RTO03. 
bit7:6 Description 
Reading  Reads out the register value. 
Writing 00  Does not produce output for the waveform generator RTO03. [Initial value] 
Writing 01 Uses RTO03_0 at the output pin of the waveform generator RTO03. 
Writing 10 Uses RTO03_1 at the output pin of the waveform generator RTO03. 
Writing 11 Setting is prohibited. 
 
[bit5:4] RTO02E : RTO02E Output Select Bit  Selects output for RTO02. 
bit5:4 Description 
Reading  Reads out the register value. 
Writing 00  Does not produce output for the waveform generator RTO02. [Initial value] 
Writing 01 Uses RTO02_0 at the output pin of the waveform generator RTO02. 
Writing 10 Uses RTO02_1 at the output pin of the waveform generator RTO02. 
Writing 11 Setting is prohibited. 
 
[bit3:2] RTO01E : RTO01E Output Select Bit  Selects output for RTO01. 
bit3:2 Description 
Reading  Reads out the register value. 
Writing 00  Does not produce output for the waveform generator RTO01. [Initial value] 
Writing 01 Uses RTO01_0 at the output pin of the waveform generator RTO01. 
Writing 10 Uses RTO01_1 at the output pin of the waveform generator RTO01. 
Writing 11 Setting is prohibited. 
 
[bit1:0] RTO00E : RTO00E Output Select Bit  Selects output for RTO00. 
bit1:0 Description 
Reading  Reads out the register value. 
Writing 00  Does not produce output for the waveform generator RTO00. [Initial value] 
Writing 01 Uses RTO00_0 at the output pin of the waveform generator RTO00. 
Writing 10 Uses RTO00_1 at the output pin of the waveform generator RTO00. 
Writing 11 Setting is prohibited. 
 
FUJITSU SEMICONDUCT
OR LIMITED 
CHAPTER  9: I/O  PORT 
MN706-00002-1v0-E 
256 
MB9Axxx/MB9Bxxx  Series
    Add page 293 to Favourites
    image text
    Enable zoom 
    							 
4. Register List 
 
4.10.  Extended Pin Function Setting Register 02 (EPFR02) 
The EPFR02 register assigns functions to a pin of the multifunction timer Unit1. 
 Register Configuration 
bit  31 30 29  28 27 26 25 24 
Field IC13S  IC12S IC11S 
Attribute R/W  R/W R/W 
Initial value 3’b000  3’b000 3’b000 
           
bit  23 22 21  20 19 18 17 16 
Field IC11S  IC10S FRCK1S DTTI1S 
Attribute   R/W R/W R/W 
Initial value   3’b000  2’b00 2’b00 
           
bit  15 14 13  12 11 10  9 8 
Field reserved  DTTI1CRTO15E  RTO14E 
Attribute -  R/W R/W  R/W 
Initial value  - 1’b0 2’b00  2’b00 
           
Bit  7 6 5  4 3 2 1 0 
Field  RTO13  RTO12E RTO11E RTO10E 
Attribute R/W  R/W R/W R/W 
Initial value  2’b00  2’b00 2’b00 2’b00 
 Register Function 
[bit31:29] IC13S : IC13 Input Select Bit 
Selects input for IC13. 
bit31:29 Description 
Reading  Reads out the register value. 
Writing 000  Uses IC13_0 at the input pin of the input capture IC13. [Initial value] 
Writing 001 Same as Writing 000. 
Writing 010  Uses IC13_1 at the input pin of the input capture IC13. 
Writing 011 Setting is prohibited. 
Writing 100  Uses internal macro MFSch.3LSYN for input of the input capture IC13. 
Writing 101 Uses internal macro MFSch.7LSYN for input of the input capture IC13. 
Writing 110 Setting is prohibited. 
Writing 111 Setting is prohibited. 
 
FUJITSU SEMICONDUCTOR LIMITED 
CHAPTER  9: I/O  PORT 
MN706-00002-1v0-E 
257 
MB9Axxx/MB9Bxxx  Series
    Add page 294 to Favourites
    image text
    Enable zoom 
    							 
4. Register List 
 
[bit28:26] IC12S : IC12 Input Select Bit Selects input for IC12. 
bit28:26 Description 
Reading  Reads out the register value. 
Writing 000  Uses IC12_0 at the input pin of the input capture IC12. [Initial value] 
Writing 001 Same as Writing 000. 
Writing 010  Uses IC12_1 at the input pin of the input capture IC12. 
Writing 011 Setting is prohibited. 
Writing 100  Uses internal macro MFSch.2LSYN for input of the input capture IC12. 
Writing 101 Uses internal macro MFSch.6LSYN for input of the input capture IC12. 
Writing 110 Setting is prohibited. 
Writing 111 Setting is prohibited. 
 
[bit25:23] IC11S : IC11 Input Select Bit  Selects input for IC11. 
bit25:23 Description 
Reading  Reads out the register value. 
Writing 000  Uses IC11_0 at the input pin of the input capture IC11. [Initial value] 
Writing 001 Same as Writing 000. 
Writing 010  Uses IC11_1 at the input pin of the input capture IC11. 
Writing 011 Setting is prohibited. 
Writing 100  Uses internal macro MFSch.1LSYN for input of the input capture IC11. 
Writing 101 Uses internal macro MFSch.5LSYN for input of the input capture IC11. 
Writing 110 Setting is prohibited. 
Writing 111 Setting is prohibited. 
 
[bit22:20] IC10S : IC10 Input Select Bit  Selects input for IC10. 
bit22:20 Description 
Reading  Reads out the register value. 
Writing 000  Uses IC10_0 at the input pin of the input capture IC10. [Initial value] 
Writing 001 Same as Writing 000. 
Writing 010  Uses IC10_1 at the input pin of the input capture IC10. 
Writing 011 Setting is prohibited. 
Writing 100  Uses internal macro MFSch.0LSYN for input of the input capture IC10. 
Writing 101 Uses internal macro MFSch.4LSYN for input of the input capture IC10. 
Writing 110 Setting is prohibited. 
Writing 111 Setting is prohibited. 
 
FUJITSU SEMICONDUCTOR LIMITED 
CHAPTER  9: I/O  PORT 
MN706-00002-1v0-E 
258 
MB9Axxx/MB9Bxxx  Series
    Add page 295 to Favourites
    image text
    Enable zoom 
    							 
4. Register List 
 
[bit19:18] FRCK1S : FRCK1 Input Select Bit Selects input for FRCK1. 
bit19:18 Description 
Reading  Reads out the register value. 
Writing 00  Uses FRCK1_0 at the input pin of  the free-run timer FRCK1. [Initial value] 
Writing 01 Same as Writing 00. 
Writing 10 Uses FRCK1_1 at the inpu t pin of the free-run timer FRCK1. 
Writing 11 Setting is prohibited. 
 
[bit17:16] DTTI1S : DTTIX1 Input Select Bit  Select input for DTTIX1. 
bit17:16 Description 
Reading  Reads out the register value. 
Writing 00  Uses DTTIX1_0 at the input pin of the waveform generator DTTIX1. [Initial value] 
Writing 01  Same as Writing 00. 
Writing 10  Uses DTTIX1_1 at the input pin of the waveform generator DTTIX1. 
Writing 11 Setting is prohibited. 
 
[bit15:13] res : Reserved Bit  0b000 is read out from these bits. 
When writing these bits, set them to 0b000. 
[bit12] DTTI1C : DTTIX1  Function Select Bit 
Selects a function for DTTIX1. 
bit Description 
Reading  Reads out the register value. 
Writing 0  Does not switch GPIO by DTTIF1 for output of pins RTO10 to RTO15. [Initial value]
Writing 1  Switches GPIO by DTTIF1 for output of pins RTO10 to RTO15. 
 
[bit11:10] RTO15E : RTO15E Output Select Bit  Selects output for RTO15. 
bit11:10 Description 
Reading  Reads out the register value. 
Writing 00  Does not produce output for the waveform generator RTO15. [Initial value] 
Writing 01 Uses RTO15_0 at the output pin of the waveform generator RTO15. 
Writing 10 Uses RTO15_1 at the output pin of the waveform generator RTO15. 
Writing 11 Setting is prohibited. 
 
FUJITSU SEMICONDUCTOR LIMITED 
CHAPTER  9: I/O  PORT 
MN706-00002-1v0-E 
259 
MB9Axxx/MB9Bxxx  Series
    Add page 296 to Favourites
    image text
    Enable zoom 
    							 
4. Register List 
 
[bit9:8] RTO14E : RTO14E Output Select Bit Selects output for RTO14. 
bit9:8 Description 
Reading  Reads out the register value. 
Writing 00  Does not produce output for the waveform generator RTO14. [Initial value] 
Writing 01 Uses RTO14_0 at the output pin of the waveform generator RTO14. 
Writing 10 Uses RTO14_1 at the output pin of the waveform generator RTO14. 
Writing 11 Setting is prohibited. 
 
[bit7:6] RTO13E : RTO13E Output Select Bit  Selects output for RTO13. 
bit7:6 Description 
Reading  Reads out the register value. 
Writing 00  Does not produce output for the waveform generator RTO13. [Initial value] 
Writing 01 Uses RTO13_0 at the output pin of the waveform generator RTO13. 
Writing 10 Uses RTO13_1 at the output pin of the waveform generator RTO13. 
Writing 11 Setting is prohibited. 
 
[bit5:4] RTO12E : RTO12E Output Select Bit  Selects output for RTO12. 
bit5:4 Description 
Reading  Reads out the register value. 
Writing 00  Does not produce output for the waveform generator RTO12. [Initial value] 
Writing 01 Uses RTO12_0 at the output pin of the waveform generator RTO12. 
Writing 10 Uses RTO12_1 at the output pin of the waveform generator RTO12. 
Writing 11 Setting is prohibited. 
 
[bit3:2] RTO11E : RTO11E Output Select Bit  Selects output for RTO11. 
bit3:2 Description 
Reading  Reads out the register value. 
Writing 00  Does not produce output for the waveform generator RTO11. [Initial value] 
Writing 01  Uses RTO11_0 at the output pin of the waveform generator RTO11. 
Writing 10 Uses RTO11_1 at the output pin of the waveform generator RTO11. 
Writing 11 Setting is prohibited. 
 
[bit1:0] RTO10E : RTO10E Output Select Bit  Selects output for RTO10. 
bit1:0 Description 
Reading  Reads out the register value. 
Writing 00  Does not produce output for the waveform generator RTO10. [Initial value] 
Writing 01  Uses RTO10_0 at the output pin of the waveform generator RTO10. 
Writing 10 Uses RTO10_1 at the output pin of the waveform generator RTO10. 
Writing 11 Setting is prohibited. 
 
FUJITSU SEMICONDUCTOR LIMITED 
CHAPTER  9: I/O  PORT 
MN706-00002-1v0-E 
260 
MB9Axxx/MB9Bxxx  Series
    Add page 297 to Favourites
    image text
    Enable zoom 
    							 
4. Register List 
 
4.11.  Extended Pin Function Setting Register 04 (EPFR04) 
The EPFR04 register assigns functions to pins of ch.0, ch.1, ch.2 and ch.3 of the base timer. 
 Register Configuration 
bit  31 30 29  28 27 26 25 24 
Field reserved  TIOB3S TIOA3E  TIOA3S 
Attribute  - R/W R/W R/W 
Initial value  -  2’b00 2’b00 2’b00 
           
bit  23 22 21  20 19 18 17 16 
Field  reserved  TIOB2S TIOA2E reserved 
Attribute -  R/W R/W  - 
Initial value  - 2’b00  2’b00  - 
           
bit  15 14 13  12 11 10  9 8 
Field reserved  TIOB1S TIOA1E  TIOA1S 
Attribute  - R/W R/W R/W 
Initial value  -  2’b00 2’b00 2’b00 
           
bit  7 6 5  4 3 2 1 0 
Field  reserved  TIOB0S TIOA0E reserved 
Attribute -  R/W R/W  - 
Initial value  - 2’b00  2’b00  - 
 Register Function 
[bit31:30] res : Reserved Bit 
0b00 is read out from these bits. 
When writing these bits, set them to 0b00. 
[bit29:28] TIOB3S : TIOB3 Input Select Bit  Selects input for TIOB3. 
bit29:28 Description 
Reading  Reads out the register value. 
Writing 00  Uses TIOB3_0 at the input pin of BT-ch3-TIOB. [Initial value] 
Writing 01  Same as Writing 00. 
Writing 10 Uses TIOB3_1 at the input pin of BT-ch3-TIOB. 
Writing 11 Uses TIOB3_2 at the input pin of BT-ch3-TIOB. 
 
[bit27:26] TIOA3E : TIOA3E Output Select Bit  Selects output for TIOA3. 
bit27:26 Description 
Reading  Reads out the register value. 
Writing 00  Does not produce output for BT-ch3-TIOA. [Initial value] 
Writing 01 Uses TIOA3_0 at the output pin of BT-ch3-TIOA. 
Writing 10 Uses TIOA3_1 at the output pin of BT-ch3-TIOA. 
Writing 11 Uses TIOA3_2 at the output pin of BT-ch3-TIOA. 
 
FUJITSU SEMICONDUCTOR LIMITED 
CHAPTER  9: I/O  PORT 
MN706-00002-1v0-E 
261 
MB9Axxx/MB9Bxxx  Series
    Add page 298 to Favourites
    image text
    Enable zoom 
    							 
4. Register List 
 
[bit25:24] TIOA3S : TIOA3 Input Select Bit Selects input for TIOA3. 
bit25:24 Description 
Reading  Reads out the register value. 
Writing 00  Uses TIOA3_0 at the input pin of BT-ch3-TIOA. [Initial value] 
Writing 01  Same as Writing 00. 
Writing 10 Uses TIOA3_1 at the input pin of BT-ch3-TIOA. 
Writing 11 Uses TIOA3_2 at the input pin of BT-ch3-TIOA. 
 
[bit23:22] res : Reserved Bit  0b00 is read out from these bits. 
When writing these bits, set them to 0b00. 
[bit21:20] TIOB2S : TIOB2 Input Select Bit  Selects input for TIOB2. 
bit21:20 Description 
Reading  Reads out the register value. 
Writing 00  Uses TIOB2_0 at the input pin of BT-ch2-TIOB. [Initial value] 
Writing 01 Same as Writing 00 
Writing 10 Uses TIOB2_1 at the input pin of BT-ch2-TIOB. 
Writing 11 Uses TIOB2_2 at the input pin of BT-ch2-TIOB. 
 
[bit19:18] TIOA2E : TIOA2 Output Select Bit  Selects output for TIOA2. 
bit19:18 Description 
Reading  Reads out the register value. 
Writing 00  Does not produce output for BT-ch2-TIOA. [Initial value] 
Writing 01 Uses TIOA2_0 at the output pin of BT-ch2-TIOA. 
Writing 10 Uses TIOA2_1 at the output pin of BT-ch2-TIOA. 
Writing 11 Uses TIOA2_2 at the output pin of BT-ch2-TIOA. 
 
[bit17:14] res : Reserved Bit  0b00 is read out from these bits. 
When writing these bits, set them to 0b00. 
[bit13:12] TIOB1S : TIOB1 Input Select Bit  Selects input for TIOB1. 
bit13:12 Description 
Reading  Reads out the register value. 
Writing 00  Uses TIOB1_0 at the input pin of BT-ch1-TIOB. [Initial value] 
Writing 01  Same as Writing 00. 
Writing 10 Uses TIOB1_1 at the input pin of BT-ch1-TIOB. 
Writing 11 Uses TIOB1_2 at the input pin of BT-ch1-TIOB. 
 
FUJITSU SEMICONDUCTOR LIMITED 
CHAPTER  9: I/O  PORT 
MN706-00002-1v0-E 
262 
MB9Axxx/MB9Bxxx  Series
    Add page 299 to Favourites
    image text
    Enable zoom 
    							 
4. Register List 
 
[bit11:10] TIOA1E : TIOA1E Output Select Bit Selects output for TIOA1. 
bit11:10 Description 
Reading  Reads out the register value. 
Writing 00  Does not produce output for BT-ch1-TIOA. [Initial value] 
Writing 01 Uses TIOA1_0 at the output pin of BT-ch1-TIOA. 
Writing 10 Uses TIOA1_1 at the output pin of BT-ch1-TIOA. 
Writing 11 Uses TIOA1_2 at the output pin of BT-ch1-TIOA. 
 
[bit9:8] TIOA1S : TIOA1 Input Select Bit  Selects input for TIOA1. 
bit9:8 Description 
Reading  Reads out the register value. 
Writing 00  Uses TIOA1_0 at the input pin of BT-ch1-TIOA. [Initial value] 
Writing 01  Same as Writing 00. 
Writing 10 Uses TIOA1_1 at the input pin of BT-ch1-TIOA. 
Writing 11 Uses TIOA1_2 at the input pin of BT-ch1-TIOA. 
 
[bit7:6] res : Reserved Bit  0b00 is read out from these bits. 
When writing these bits, set them to 0b00. 
[bit5:4] TIOB0S : TIOB0 Input Select Bit  Selects input for TIOB0. 
bit5:4 Description 
Reading  Reads out the register value. 
Writing 00  Uses TIOB0_0 at the input pin of BT-ch0-TIOB. [Initial value] 
Writing 01  Same as Writing 00. 
Writing 10 Uses TIOB0_1 at the input pin of BT-ch0-TIOB. 
Writing 11 Uses TIOB0_2 at the input pin of BT-ch0-TIOB. 
 
[bit3:2] TIOA0E : TIOA0 Output Select Bit  Selects output for TIOA0. 
bit3:2 Description 
Reading  Reads out the register value. 
Writing 00  Does not produce output for BT-ch0-TIOA. [Initial value] 
Writing 01 Uses TIOA0_0 at the output pin of BT-ch0-TIOA. 
Writing 10 Uses TIOA0_1 at the output pin of BT-ch0-TIOA. 
Writing 11 Uses TIOA0_2 at the output pin of BT-ch0-TIOA. 
 
[bit1:0] res : Reserved Bit  0b00 is read out from these bits. 
When writing these bits, set them to 0b00. 
FUJITSU SEMICONDUCTOR LIMITED 
CHAPTER  9: I/O  PORT 
MN706-00002-1v0-E 
263 
MB9Axxx/MB9Bxxx  Series
    Add page 300 to Favourites
    image text
    Enable zoom 
    							 
4. Register List 
 
   TIOA 
Even channel

s are for output only. 
Odd channels are for both input and output. 
   TIOB 
Input only. 
   TIOA1, TIOA3, TIOA5, TIOA7(odd number of A) are not bidirectional pins so that choose either 
input pin or output pin for them. When output is chosen for odd TIOA channel, input setting will be 
ignored. 
Example1 : Use TIOA1 as an output pin:  When TIOA1 is output to TIOA 1_0, select EPFR04.TIOA1E = 01. 
When TIOA1 is output to TIOA 1_1, select EPFR04.TIOA1E = 10. 
When TIOA1 is output to TIOA1_2, select EPFR04.TIOA1E = 11. 
Settings for EPFR04.TIOA1S will be ignored. 
Select ADE=0, PFR=1 for selected pins (DDR will be ignored). 
All the output of other peripheral function pins which are also used by selected pins must be OFF. 
Example2 : When TIOA1 is used as an input pin:  Select EPFR04.TIOA1E = 00. 
When TIOA1 is input from TIOA1_0, select EPFR04.TIOA1S = 00 or 01. 
When TIOA1 is input from TIOA1_1, select EPFR04.TIOA1S = 10. 
When TIOA1 is input from TIOA1_2, select EPFR04.TIOA1S = 11. 
Select ADE=0, PFR=1 for selected pins (DDR will be ignored). 
All the output of other peripheral function pins which are also used by selected pins must be OFF. 
* When a pin is set to input, the output of the pin which is also used by selected pins (GPIO, other peripheral  function pins) can be input to the base timer as Feedback with a setting not described above. 
 
 
FUJITSU SEMICONDUCTOR LIMITED 
CHAPTER  9: I/O  PORT 
MN706-00002-1v0-E 
264 
MB9Axxx/MB9Bxxx  Series
    All Fujitsu manuals Comments (0)