Home > Nitsuko > Communications System > Nitsuko 124i/384i Software Manual

Nitsuko 124i/384i Software Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Nitsuko 124i/384i Software Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 57 Nitsuko manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1195
    							0124 - ISDN Layer 2 Timer Setup
      Sorts Data   Updates CEU   Can be Copied
    Description
     124i Not available. 384i Available.
    INRefer to the system PRI (P/N 92000PRI**) or BRI (P/N 92000BRI**) Manual.
    0100 - Basic Hardware Setup (Part A)
    0124 - ISDN Layer 2 Timer Setup
    92000SWG08  Issue 1-0 PROGRAMMING   685 
    						
    							0125 - ISDN Layer 3 Operation Mode Setup
      Sorts Data   Updates CEU   Can be Copied
    Description
     124i Not available. 384i Available.
    INRefer to the system PRI (P/N 92000PRI**) or BRI (P/N 92000BRI**) Manual.
    0100 - Basic Hardware Setup (Part A)
    0125 - ISDN Layer 3 Operation Mode Setup
    686   PROGRAMMING 92000SWG08  Issue 1-0 
    						
    							0126 - ISDN Layer 3 Timer Setup
      Sorts Data   Updates CEU   Can be Copied
    Description
     124i Not available. 384i Available.
    INRefer to the system PRI (P/N 92000PRI**) or BRI (P/N 92000BRI**) Manual.
    0100 - Basic Hardware Setup (Part A)
    0126 - ISDN Layer 3 Timer Setup
    92000SWG08  Issue 1-0 PROGRAMMING   687 
    						
    							0127 - ITSU Operation Mode Setup
      Sorts Data   Updates CEU   Can be Copied
    Description
     124i Not available. 384i Available.
    INRefer to the system PRI (P/N 92000PRI**) or BRI (P/N 92000BRI**) Manual.
    0100 - Basic Hardware Setup (Part A)
    0127 - ITSU Operation Mode Setup
    688   PROGRAMMING 92000SWG08  Issue 1-0 
    						
    							0128 - Analog Station (ASTU PCB) Sidetone Level
      Sorts Data   Updates CEU   Can be Copied
    Description
     124i Not available. 384i Available.
    INUse Program 0128 - Analog Station (ASTU PCB) Sidetone Level to set the sidetone level for single line tele-
    phones connected to ASTU PCBs. In Program 0128 Item 1, you can choose among the four preset sidetone lev-
    els or up to eight additional levels calibrated to specific telephones. Use Program 0128 Item 2 to calibrate levels
    for individual phones.
    0128 Item 1 Entry Description
    0 Highest preset sidetone level
    1 Upper mid range preset sidetone level
    2 Lower mid range preset sidetone level
    3 Lowest mid range preset sidetone level
    4-7 Not used (Same level as entry 0)
    8-15 Eight additional levels calibrated to certain
    telephones
    Conditions
    None
    Feature Cross Reference
    Single Line Telephones
    Telephone Programming Instructions
    To assign a sidetone level in Program 0128 Item 1:
    To create calibrated sidetone levels, turn to the procedure for Item 2 that follows.
    1. Enter the programming mode.
    2. 0128 + HOLD
    STA PORT No?
    3. Enter the number of ASTU single line station port you want to program + HOLD
    Item No?
    4. 1 + HOLD
    DSP Type:
    5. Enter the desired sidetone level (03, 8-15).
    The preset sidetone levels are 0-3. The calibrated sidetone levels are 8-15. 
    6. HOLD
    Item No?
    7. Return to step 4 to assign another sidetone level
    OR
    HOLD + Return to step 2 to select another station port
    OR
    HOLD + HOLD to exit
    0100 - Basic Hardware Setup (Part A)
    0128 - Analog Station (ASTU PCB) Sidetone Level
    92000SWG08  Issue 1-0 PROGRAMMING   689 
    						
    							To calibrate the sidetone for a specific single line extension in Program 0128 Item 2:
    1. Enter the programming mode.
    2. 0128 + HOLD
    STA PORT No?
    3. Enter the number of the ASTU single line station port you want to program +HOLD
    Item No?
    4. 2 + HOLD
    ADF DSP Type
    5. Lift the handset on the single line telephone that you want to automatically calibrate.
    6. Remove the handset modular line cord.
    If the handset doesn’t have a modular line cord, disassemble the handset earpiece and remove
    the wires connected to the receiver element.
    7. Enter the number that the system will use to store your calibrated sidetone level (8-15).
    The number you select will store the calibrated levels that this procedure generates. You can as-
    sign this number to extensions in the procedure for Item 1.
    8. HOLD
    Testing. . .
    DSP ADF Complete
    If you see Error, hand up the handset and repeat from step 5. You must be listening to dial
    tone at the single line set when the test begins.
    9. HOLD to repeat from step 4
    OR
    HOLD + HOLD to repeat from step 3
    OR
    HOLD three times to exit
    0100 - Basic Hardware Setup (Part A)
    0128 - Analog Station (ASTU PCB) Sidetone Level
    690   PROGRAMMING 92000SWG08  Issue 1-0 
    						
    							0129 - Analog Trunk (ATRU PCB) Sidetone Setting
      Sorts Data   Updates CEU   Can be Copied
    Description
     124i Not available. 384i Available.
    INUse Program 0129 - Analog Trunk (ATRU PCB) Sidetone Setting to set the sidetone level for analog trunks con-
    nected to ATRU PCB ports. In Program 0129, you can choose among the four preset sidetone levels or up to eight ad-
    ditional levels calibrated to specific trunks. Use Program 0129 Item 2 to calibrate levels for individual trunks.
    0129 Item 1 Entry Description Loss
    0 Highest preset sidetone level 0 dB
    1 Upper mid range preset sidetone level 3 dB
    2 Lower mid range preset sidetone level 5 dB
    3 Lowest mid range preset sidetone level 7 dB
    4-7 Not used (Same level as entry 0)
    8-15 Eight additional levels calibrated to certain trunks
    Conditions
    None
    Feature Cross Reference
    Central Office Calls, Placing
    Central Office Calls, Answering
    Telephone Programming Instructions
    To assign a sidetone level in Program 0129 Item 1:
    To create calibrated sidetone levels, turn to the procedure for Item 2 that follows.
    1. Enter the programming mode.
    2. 0129 + HOLD
    TRK No?
    3. Enter the number of ATRU trunk port you want to program + HOLD
    Item No?
    4. 1 + HOLD
    DSP Type:
    5. Enter the desired sidetone level (0-3, 8-15).
    The preset sidetone levels are 0-3. The calibrated sidetone levels are 8-15. 
    6. HOLD
    Item No?
    7. Return to step 4 to assign another sidetone level
    OR
    HOLD + Return to step 2 to select another station port
    OR
    HOLD + HOLD to exit
    0100 - Basic Hardware Setup (Part A)
    0129 - Analog Trunk (ATRU PCB) Sidetone Setting
    92000SWG08  Issue 1-0 PROGRAMMING   691 
    						
    							To calibrate the sidetone for a specific trunk in Program 0129 Item 2:
    1. Enter the programming mode.
    2. 0129 + HOLD
    TRK No?
    3. Enter the number of the ATRU trunk port you want to program + HOLD
    Item No?
    4. 2 + HOLD
    ADF DSP Type
    5. At a different telephone, use Handsfree (i.e., press SPK) to place or answer a call on the trunk you want
    to automatically calibrate.
    6. Press the MIC key to enable Microphone Mute.
    The microphone must be muted before going to the next step. For an accurate calibration, the
    trunk should be on a call and not listening to dial tone.
    7. Enter the number that the system will use to store your calibrated sidetone level (8-15).
    The number you select will store the calibrated levels that this procedure generates. You can as-
    sign this number to trunks in the procedure for Item 1.
    8. HOLD
    Testing. . .
    DSP ADF Complete
    If you see Error, hand up the handset and repeat from step 5. You must be listening to dial
    tone at the single line set when the test begins.
    9. HOLD to repeat from step 4
    OR
    HOLD + HOLD to repeat from step 3
    OR
    HOLD three times to exit
    0100 - Basic Hardware Setup (Part A)
    0129 - Analog Trunk (ATRU PCB) Sidetone Setting
    692   PROGRAMMING 92000SWG08  Issue 1-0 
    						
    							0130 - Date Format for SMDR and System Reports
      Sorts Data   Updates CEU   Can be Copied
    Description
     124i Available. 384i Available.
    INUse Program 0130 - Date Format for SMDR and System Reports to set the date format that appears on the
    SMDR printout and various system reports. The options are:
    0 (U.S.A. format - month/date/year)
    1 (Japanese format - year/month/date)
    2 (European format - date/month/year)
    Conditions
    None
    Feature Cross Reference
    Station Message Detail Recording
    Time and Date
    Telephone Programming Instructions
    To enter data for Program 0130 (Date Format for SMDR and System Reports):
    1. Enter the programming mode.
    2. 0130 + HOLD
    Format:
    3. Enter the desired date format (0=U.S.A., 1 = Japanese and 2 = European)
    4. HOLD
    0100 - Basic Hardware Setup (Part A)
    0130 - Date Format for SMDR and System Reports
    92000SWG08  Issue 1-0 PROGRAMMING   693 
    						
    							0131 - Unsupervised Conf. CODEC Gain Setup
      Sorts Data   Updates CEU   Can be Copied
    Description
     124i Available. 384i Available.
    INUse Program 0131 - Unsupervised Conference CODEC Gain Setup to set up the five CODEC gain types for
    trunk circuits in an Unsupervised Conference. Each type has a unique CODEC transmit and receive level (called
    the gain value). You assign CODEC gain types to trunks for Unsupervised Conference in Program 0901, Item
    23. The following chart shows the relative gain (in dB) for each gain value.
    Enter this gain value . . . For this gain level . . .
    0-31 0 dB to +15.5 dB, increasing in 
    .5 dB steps
    32-63 0 dB to -15.5 dB, decreasing in 
    .5 dB steps
    Following are the default settings for this option:
    Type Setting
    Type 1: Transmit and Receive 0 (0 dB)
    Type 2: Transmit and Receive 42 (-5 dB)
    Type 3: Transmit and Receive 38 (-3 dB)
    Type 4: Transmit and Receive 6 (+3 dB)
    Type 5: Transmit and Receive 10 (+5 dB)
    Conditions
    First condition
    Default Setting
    Feature Cross Reference
    Tandem Trunking (Unsupervised Conference)
    Telephone Programming Instructions
    To enter data for Program 0131 (Unsupervised Conference Call CODEC Gain Type Settings):
    1. Enter the programming mode.
    2. 0131 + HOLD
    Type No.
    3. Enter the CODEC Type No. you want to change (1-5).
    4. HOLD
    Transmit:
    5. Enter the CODEC transmit gain value (0-31 or 32-63).
    6. HOLD
    Receive:
    7. Enter the CODEC receive gain value (0-31 or 32-63).
    8. HOLD
    0100 - Basic Hardware Setup (Part A)
    0131 - Unsupervised Conf. CODEC Gain Setup
    694   PROGRAMMING 92000SWG08  Issue 1-0 
    						
    All Nitsuko manuals Comments (0)

    Related Manuals for Nitsuko 124i/384i Software Manual