Home > Nitsuko > Communications System > Nitsuko 124i/384i Software Manual

Nitsuko 124i/384i Software Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Nitsuko 124i/384i Software Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 57 Nitsuko manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1195
    Add page 691 to Favourites
    image text
    Enable zoom 
    							Feature Cross Reference
Dial Pad Confirmation Tone
Distinctive Ringing, Tones and Flash Patterns
Telephone Programming Instructions
To enter data for Program 0110 (Keyset Confirmation Tone):
1. Enter the programming mode.
2. 0110 + HOLD
FREQ:nn-
The previously programmed value displays.
3. Enter the number of the frequency of the Dial Pad Confirmation Tone + HOLD
Refer to the table on the previous page for Dial Pad Confirmation Tone frequency numbers.
DUR:nn-
4. Enter the confirmation tone duration (2-25 5 mS increments).
5. HOLD to exit.
When you exit the programming mode, the system will restart (about 6 seconds in 124i - about
30 seconds in 384i).
0100 - Basic Hardware Setup (Part A)
0110 - Keyset Confirmation Tone
92000SWG08  Issue 1-0 PROGRAMMING   655
    Add page 692 to Favourites
    image text
    Enable zoom 
    							0111 - Trunk Ring Tone
✔  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available. After you change this
program and exit programming, the
system will reset for about thirty
seconds. 
- Requires Base 2.13, EXCPRU 2.18
or higher.- Requires system software 3.04 or
higher.
INUse this program to set the trunk ring tones, which are the tones a user hears when a trunk rings an extension.
These tones are grouped into four trunk ring tone Ranges (1-4), also called patterns, that consist of a combina-
tion of frequencies. (You assign a specific Range to trunks in Program 0902.) Within each Range there are three
frequency Ty p e s: High, Middle and Low. (Service Code 820 allows users to choose the Ty p e for their incoming
calls.) Each Ty p e in turn consists of three frequencies played simultaneously to make up the tone. These fre-
quencies are determined by their Frequency Number (see the System Tones A and B tables beginning on the next
page). In this program, you assign the three Frequency Numbers for each Ty p e, for each of the four Ranges. The
chart below shows the default Frequency Numbers for each Ty p e in each Range. If you change the Frequency
Numbers for a Ty p e, be sure to write them in the New column for future reference.
Trunk Ring Tones
Trunk Ring Tone Range 1
Type
Frequency 1 Frequency 2 Frequency 3
Default New Default New Default New
High30 36 124
Middle54 76 124
Low75 88 124
Trunk Ring Tone Range 2
Type
Frequency 1 Frequency 2 Frequency 3
Default New Default New Default New
High11 15 249
Middle15 19 249
Low21 26 249
Trunk Ring Tone Range 3
Type
Frequency 1 Frequency 2 Frequency 3
Default New Default New Default New
High17 23 83
Middle35 44 83
Low72 88 83
0100 - Basic Hardware Setup (Part A)
0111 - Trunk Ring Tone
656   PROGRAMMING 92000SWG08  Issue 1-0
    Add page 693 to Favourites
    image text
    Enable zoom 
    							Trunk Ring Tone Range 4
Type
Frequency 1 Frequency 2 Frequency 3
Default New Default New Default New
High12 13 79
Middle15 16 79
Low20 21 79
System Tones - A
No. Frequency (Hz) No. Frequency (Hz) No. Frequency (Hz)
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
413200.00
2909.09
2666.67
2461.54
2285.71
2133.33
2000.00
1882.35
1777.78
1684.21
1600.00
1523.81
1454.54
1391.30
1333.33
1280.00
1230.77
1185.19
1142.86
1103.45
1066.67
1032.26
1000.00
969.70
941.18
914.29
888.89
864.86
- - - - -
820.51
800.00
780.49
761.9042
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74744.19
727.27
711.11
695.65
680.85
666.67
653.06
640.00
627.45
615.38
603.77
592.59
581.82
571.43
561.40
551.72
542.37
533.33
524.59
516.13
507.94
500.00
492.31
484.85
477.61
470.59
463.77
457.14
450.80
444.44
438.36
432.43
426.6775
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105421.05
415.58
410.26
405.06
400.00
395.06
390.24
385.84
380.95
376.47
372.09
367.82
363.64
359.55
355.56
351.65
347.83
344.09
340.43
336.84
333.33
329.90
326.53
323.23
320.00
316.83
313.73
310.68
307.69
304.76
301.89
0100 - Basic Hardware Setup (Part A)
0111 - Trunk Ring Tone
92000SWG08  Issue 1-0 PROGRAMMING   657
    Add page 694 to Favourites
    image text
    Enable zoom 
    							System Tones - B
No. Frequency (Hz) No. Frequency (Hz) No. Frequency (Hz)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
431000.00
667.67
500.00
400.00
333.33
285.71
250.00
222.22
200.00
181.82
166.67
153.85
142.86
133.33
125.00
117.65
111.11
105.26
100.00
95.24
90.91
86.96
83.33
80.00
76.92
74.07
71.43
68.97
66.67
64.52
62.50
60.61
58.82
57.14
55.56
54.05
52.63
51.28
50.00
48.78
47.62
46.51
45.4544
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
8644.44
43.48
42.55
41.67
40.82
40.00
39.22
38.46
37.74
37.04
36.36
35.71
35.09
34.48
33.90
33.33
32.79
32.36
31.75
31.25
30.77
30.30
29.85
29.41
28.99
28.57
28.17
27.78
27.40
27.03
26.67
26.32
25.97
25.64
25.32
25.00
24.69
24.39
24.10
23.81
23.53
23.26
22.9987
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
12822.73
22.47
22.22
21.98
21.74
21.51
21.28
21.05
20.83
20.62
20.41
20.20
20.00
19.80
19.61
19.42
19.23
19.05
18.87
18.69
18.52
18.35
18.18
18.02
17.86
17.70
17.54
17.39
17.24
17.09
16.95
16.81
16.67
16.53
16.39
16.26
16.13
16.00
15.87
15.75
15.63
15.50
0100 - Basic Hardware Setup (Part A)
0111 - Trunk Ring Tone
658   PROGRAMMING 92000SWG08  Issue 1-0
    Add page 695 to Favourites
    image text
    Enable zoom 
    							System Tones - B (Cont’d)
No. Frequency (Hz) No. Frequency (Hz) No. Frequency (Hz)
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
17115.38
15.27
15.15
15.04
14.93
14.81
14.71
14.60
14.49
14.39
14.29
14.18
14.08
13.99
13.89
13.79
13.70
13.61
13.51
13.42
13.33
13.25
13.16
13.07
12.99
12.90
12.82
12.74
12.66
12.58
12.50
12.42
12.35
12.27
12.20
12.12
12.05
11.98
11.90
11.83
11.76
11.70
11.63172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
21411.56
11.49
11.43
11.36
11.30
11.24
11.17
11.11
11.05
10.99
10.93
10.87
10.81
10.75
10.70
10.64
10.58
10.53
10.47
10.42
10.36
10.31
10.26
10.20
10.15
10.10
10.05
10.00
9.95
9.90
9.85
9.80
9.76
9.71
9.66
9.62
9.57
9.52
9.48
9.43
9.39
9.35
9.30215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
2559.26
9.22
9.17
9.13
9.09
9.05
9.01
8.97
8.93
8.89
8.85
8.81
8.77
8.73
8.70
8.66
8.62
8.58
8.55
8.51
8.47
8.44
8.40
8.37
8.33
8.30
8.26
8.23
8.20
8.16
8.13
8.10
8.06
8.03
8.00
7.97
7.94
7.91
7.87
7.84
7.81
Conditions
Do not use Frequency entry 37. The system saves entry 37 as 36 (864.86).
Feature Cross Reference
Central Office Calls, Answering
Distinctive Ringing, Tones and Flash Patterns
0100 - Basic Hardware Setup (Part A)
0111 - Trunk Ring Tone
92000SWG08  Issue 1-0 PROGRAMMING   659
    Add page 696 to Favourites
    image text
    Enable zoom 
    							Telephone Programming Instructions
To enter data for Program 0111 (Trunk Ring Tone):
1. Enter the programming mode.
2. 0111 + HOLD
Pattern No?
3. Enter the number of the trunk ring tone Range you want to program (1-4) + HOLD
Type No?
4. Enter the number of the Type (1-3) you want to program + HOLD
1 = High, 2 = Middle and 3 = Low
Frequency No?
5. Enter the frequency you want to program (1-3) + HOLD
Refer to the Trunk Ring Tones chart if necessary.
6. For the frequency selected in the previous step, enter the Frequency Number + HOLD
For frequencies 1 and 2, select from System Tones - Part A. For frequency 3, select from System
Tones - Part B.
7. Repeat from step 5 to program another frequency.
OR
HOLD + Repeat from step 4 to program another Type.
8. OR
HOLD + HOLD + Repeat from step 3 to program another Range.
OR
HOLD + HOLD + HOLD to exit.
0100 - Basic Hardware Setup (Part A)
0111 - Trunk Ring Tone
660   PROGRAMMING 92000SWG08  Issue 1-0
    Add page 697 to Favourites
    image text
    Enable zoom 
    							0112 - Intercom and Alarm Ring Tone
✔  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available. After you change this
program and exit programming, the
system will reset for about thirty
seconds. 
- Requires Base 2.13, EXCPRU 2.10
or higher.- Requires system software 3.04 or
higher.
INUse this program to set the Intercom and External Alarm Sensor ring tones. Each ring tone consists of a combi-
nation of frequencies, grouped into three frequency Ty p e s: High, Middle and Low. (Service Code 820 allows us-
ers to choose the Ty p e for their incoming Intercom calls.) Each Ty p e in turn consists of three frequencies
played simultaneously to make up the tone. These frequencies are determined by their Frequency Number (see
the System Tones A and B tables beginning on the next page). In this program, you assign the three Frequency
Numbers for each Ty p e for both the Intercom and External Alarm Sensor ring tones. The chart below shows the
default Frequency Numbers for each Ty p e , for both tones. If you change the Frequency Numbers for a Ty p e, be
sure to write them in the New column for future reference.
Intercom and Alarm Ring Tones Chart
Intercom Ring Tone (Range 1)
Type
Frequency 1 Frequency 2 Frequency 3
Default New Default New Default New
High39 30 166
Middle52 36 166
Low79 49 166
Alarm Ring Tone (Range 2)
Type
Frequency 1 Frequency 2 Frequency 3
Default New Default New Default New
High39 39 001
Middle39 39 001
Low39 39 001
0100 - Basic Hardware Setup (Part A)
0112 - Intercom and Alarm Ring Tone
92000SWG08  Issue 1-0 PROGRAMMING   661
    Add page 698 to Favourites
    image text
    Enable zoom 
    							System Tones - A
No. Frequency (Hz) No. Frequency (Hz) No. Frequency (Hz)
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
413200.00
2909.09
2666.67
2461.54
2285.71
2133.33
2000.00
1882.35
1777.78
1684.21
1600.00
1523.81
1454.54
1391.30
1333.33
1280.00
1230.77
1185.19
1142.86
1103.45
1066.67
1032.26
1000.00
969.70
941.18
914.29
888.89
864.86
- - - - -
820.51
800.00
780.49
761.9042
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74744.19
727.27
711.11
695.65
680.85
666.67
653.06
640.00
627.45
615.38
603.77
592.59
581.82
571.43
561.40
551.72
542.37
533.33
524.59
516.13
507.94
500.00
492.31
484.85
477.61
470.59
463.77
457.14
450.80
444.44
438.36
432.43
426.6775
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105421.05
415.58
410.26
405.06
400.00
395.06
390.24
385.84
380.95
376.47
372.09
367.82
363.64
359.55
355.56
351.65
347.83
344.09
340.43
336.84
333.33
329.90
326.53
323.23
320.00
316.83
313.73
310.68
307.69
304.76
301.89
0100 - Basic Hardware Setup (Part A)
0112 - Intercom and Alarm Ring Tone
662   PROGRAMMING 92000SWG08  Issue 1-0
    Add page 699 to Favourites
    image text
    Enable zoom 
    							System Tones - B
No. Frequency (Hz) No. Frequency (Hz) No. Frequency (Hz)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
431000.00
667.67
500.00
400.00
333.33
285.71
250.00
222.22
200.00
181.82
166.67
153.85
142.86
133.33
125.00
117.65
111.11
105.26
100.00
95.24
90.91
86.96
83.33
80.00
76.92
74.07
71.43
68.97
66.67
64.52
62.50
60.61
58.82
57.14
55.56
54.05
52.63
51.28
50.00
48.78
47.62
46.51
45.4544
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
8644.44
43.48
42.55
41.67
40.82
40.00
39.22
38.46
37.74
37.04
36.36
35.71
35.09
34.48
33.90
33.33
32.79
32.36
31.75
31.25
30.77
30.30
29.85
29.41
28.99
28.57
28.17
27.78
27.40
27.03
26.67
26.32
25.97
25.64
25.32
25.00
24.69
24.39
24.10
23.81
23.53
23.26
22.9987
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
12822.73
22.47
22.22
21.98
21.74
21.51
21.28
21.05
20.83
20.62
20.41
20.20
20.00
19.80
19.61
19.42
19.23
19.05
18.87
18.69
18.52
18.35
18.18
18.02
17.86
17.70
17.54
17.39
17.24
17.09
16.95
16.81
16.67
16.53
16.39
16.26
16.13
16.00
15.87
15.75
15.63
15.50
0100 - Basic Hardware Setup (Part A)
0112 - Intercom and Alarm Ring Tone
92000SWG08  Issue 1-0 PROGRAMMING   663
    Add page 700 to Favourites
    image text
    Enable zoom 
    							System Tones - B (Cont’d)
No. Frequency (Hz) No. Frequency (Hz) No. Frequency (Hz)
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
17115.38
15.27
15.15
15.04
14.93
14.81
14.71
14.60
14.49
14.39
14.29
14.18
14.08
13.99
13.89
13.79
13.70
13.61
13.51
13.42
13.33
13.25
13.16
13.07
12.99
12.90
12.82
12.74
12.66
12.58
12.50
12.42
12.35
12.27
12.20
12.12
12.05
11.98
11.90
11.83
11.76
11.70
11.63172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
21411.56
11.49
11.43
11.36
11.30
11.24
11.17
11.11
11.05
10.99
10.93
10.87
10.81
10.75
10.70
10.64
10.58
10.53
10.47
10.42
10.36
10.31
10.26
10.20
10.15
10.10
10.05
10.00
9.95
9.90
9.85
9.80
9.76
9.71
9.66
9.62
9.57
9.52
9.48
9.43
9.39
9.35
9.30215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
2559.26
9.22
9.17
9.13
9.09
9.05
9.01
8.97
8.93
8.89
8.85
8.81
8.77
8.73
8.70
8.66
8.62
8.58
8.55
8.51
8.47
8.44
8.40
8.37
8.33
8.30
8.26
8.23
8.20
8.16
8.13
8.10
8.06
8.03
8.00
7.97
7.94
7.91
7.87
7.84
7.81
Conditions
Do not use Frequency entry 37. The system saves entry 37 as 36 (864.86).
Feature Cross Reference
Distinctive Ringing, Tones and Flash Patterns
External Alarm Sensors
Intercom
0100 - Basic Hardware Setup (Part A)
0112 - Intercom and Alarm Ring Tone
664   PROGRAMMING 92000SWG08  Issue 1-0
    All Nitsuko manuals Comments (0)

    Related Manuals for Nitsuko 124i/384i Software Manual