Nitsuko 124i/384i Software Manual

							384i/124i Feature Cross Reference
92000SWG08   Issue 1-0 Feature Cross Reference  VIIFeature Name 124i 384i
• Department Group as DIL
destination always
available.• Department Group as DIL
destination requires system
software 3.04 or higher.
• DIL overflow to Voice Mail
requires Base 2.13,
EXCPRU 2.18 or higher.• DIL overflow to Voice Mail
requires system software 3.05.15
or higher.
Direct Inward Line (DIL) (cont.)
• DIL overflow to the VAU
Automated Attendant is not
available.• DIL overflow to the VAU
Automated Attendant requires
system software 3.07.10 or
higher.
• Available ---- 15 users, 8
DISA Classes of Service
and 52 trunks.• Available ---- 15 users per
Tenant Group, 15 DISA Classes
of Service and 128 trunks.
• Requires DTDU PCB for
DTMF DISA trunks.
 • Requires DTMF receivers on
CDTU PCB for DTMF DISA
trunks.
• Enhanced Answer
Supervision requires Base
2.13, EXCPRU 2.18 or
higher.• Enhanced Answer Supervision
requires system software
3.05.15.
• Overflow routing to Voice
Mail requires Base 2.13,
EXCPRU 2.18 or higher.• Overflow routing to Voice Mail
is available.
• Tone Detection Setup and
setting the CODEC Gain
Type transmit and receive
levels requires Base 2.13,
EXCPRU 2.18 or higher.• Tone Detection Setup and
setting the CODEC Gain Type
transmit and receive levels
requires system software 3.04 or
higher.
Direct Inward System Access
(DISA)
• Overflow routing to the
VAU Automated Attendant
is not available.• Overflow routing to the VAU
Automated Attendant requires
system software 3.07.10 or
higher.
• Available.• Available.
• 8 consoles maximum (two
maximum per extension).• 32 consoles maximum (four
maximum per extension.
• Storing additional digits
after a Service Code
requires system software
Base 2.13 or EXCPRU 2.18
or higher.• Storing additional digits after a
Service Code requires system
software 3.06.14 or higher.
Direct Station Selection (DSS)
Console
• DSS Console flash rates
may be customized in Base
or EXCPRU software or
higher.• DSS Console flash rates may be
customized in system software
3.07.14 or higher.
Directed Call Pickup
• Available.• Available.
• Not available.• Available.Directory Dialing
• Requires Base 2.13 or
EXCPRU 2.18 or higher.• Requires system software
3.06.02 or higher. 
						

							384i/124i Feature Cross Reference
VIII  Feature Cross Reference 92000SWG08  Issue 1-0Feature Name 124i 384i
Distinctive Ringing, Tones and
Flash Patterns• Available.• Available.
• Customizing the Keyset
Splash Tone, Keyset
Confirmation Tone, Trunk
Ring Tone, Intercom Ring
Tone and Alarm Ring Tone
requires Base 2.13,
EXCPRU 2.18 or higher.• Customizing the Keyset Splash
Tone, Keyset Confirmation
Tone, Trunk Ring Tone,
Intercom Ring Tone and Alarm
Ring Tone requires system
software 3.04 or higher.
Do Not Disturb
• Available.• Available.
Door Box
• Available ---- eight Door
Boxes and one Chime Tone.• Available ---- eight Door Boxes
and three Chime Tones.
Dual Line Appearance
• Available.• Available.
E911 Compatibility
• Available ---- Requires
Base or EXCPRU software
4.02 or higher.• Available ---- Requires system
software 3.07.10 or higher.
• Each PGDU PCB has 4
sensors, with 8 maximum
per system (2 PCBs). All
sensors set for alarm.• Each PGDU has 8 sensors, with
16 maximum per system (2
PCBs). Sensors 1-4 and 9-12 as
set for alarm. Sensors 5-8 and
13-16 set for fax.External Alarm Sensors
• Changing the Alarm Ring
Tone frequencies requires
Base 2.13, EXCPRU 2.18
or higher.• Changing the Alarm Ring Tone
frequencies requires system
software 3.04 or higher.
Fax Machine Compatibility
• Each PGDU PCB has 4
sensors, with 8 maximum
per system (2 PCBs). All
sensors set for alarm.• Each PGDU has 8 sensors, with
16 maximum per system (2
PCBs). Sensors 1-4 and 9-12 as
set for alarm. Sensors 5-8 and
13-16 set for fax.
Flash
• Available.• Available.
• Available.• Available.Flexible System Numbering
• Complete numbering
flexibility requires Base
2.13, EXCPRU 2.18 or
higher.• Complete numbering flexibility
requires system software 3.04 or
higher.
Forced Trunk Disconnect
• Available.• Available.
Group Call Pickup
• Available ---- eight Call
Pickup Groups.• Available ---- 32 Call Pickup
Groups
• Available.• Available.Group Listen
• Enhanced operation is
available in Base 2.13,
EXCPRU 2.18 or higher.• Enhanced operation available in
system software 3.05.15 or
higher.
Handsfree and Monitor
• Available.• Available.
Handsfree Answerback/
Forced Intercom Ringing• Available.• Available.
Headset Operation
• Available.• Available.
Hold
• Available.• Available. 
						

							384i/124i Feature Cross Reference
92000SWG08   Issue 1-0 Feature Cross Reference  IXFeature Name 124i 384i
Hold (cont.)
• Hold Recall to Operator
requires system software
Base 2.13 or EXCPRU 2.18
or higher.• Hold Recall to Operator requires
system software 3.06.14 or
higher.
• Not available.• Available ---- refer to the
Hotel/Motel User Guide (P/N
92000HMT**) for additional
information.Hotel/Motel
• Year 2000 Compliance not
available.• Year 2000 Compliance requires
system software 3.07.25 or
higher.
Hotline
• Available.• Available.
Hotline, External
• Available.• Available.
InDepth and inDepth+
• Not available.• Available ---- requires system
software 3.07.18 or higher.
• Available.• Available.Intercom
• Changing the Intercom ring
tone requires Base 2.13,
EXCPRU 2.18 or higher.• Changing the Intercom ring tone
requires system software 3.04 or
higher.
Intercom Abandoned Call
Display• Available.• Available.
ISDN Compatibility
• Currently not implemented.• Contact your sales
representative for availability.
Labelmaker
• Available.• Available.
Last Number Redial
• Available.• Available.
Line Preference
• Available.• Available.
Loop Keys
• Available.• Available.
Meet Me Conference
• The system allows either 8
four-party conferences or 4
eight-party conferences.• Each DTU-A/C allows either 4
four-party conferences or 2
eight-party conferences per
PCB.
Meet Me Paging
• Available.• Available.
Meet Me Paging Transfer
• Available.• Available.
Memo Dial
• Available.• Available.
• Available.• Available.
• Single line telephones can
leave, cancel and receive
Messages Waiting.
 • Single line telephones can leave,
cancel and receive Messages
Waiting. Prior to system
software 3.02, single line
telephones cannot receive a
Message Waiting.
Message Waiting
• COS control for reminder
messages requires system
software 2.13 Base, 2.18
EXCPRU or higher.• COS control for reminder
messages requires system
software 3.04 or higher.
Microphone Cutoff
• Available.• Available.
Multiple Directory Numbers/
Call Coverage• Available.• Available. 
						

							384i/124i Feature Cross Reference
X  Feature Cross Reference 92000SWG08  Issue 1-0Feature Name 124i 384i
Multiple Directory Numbers/
Call Coverage (cont.)• In Base 4.02, EXCPRU
4.02 or higher, a Call
Coverage key will flash
when the covered extension
has a second call waiting.• In system software 3.07.10 and
higher, a Call Coverage key will
flash when the covered
extension has a second call
waiting.
Music on Hold
• Available.• Available.
Name Storing
• Available.• Available.
Networking
• Not Available.• Available ---- requires system
software 3.07.15 or higher.
Night Service
• Available.• Available.
• Available.• Available.Off Hook Signaling
• Off Hook Signaling
Enhancements are not
available.• Off Hook Signaling
Enhancement require system
software 3.07.24 or higher.
• Available.• Available.
• Entering names at a keyset
requires Base 2.13,
EXCPRU 2.18 or higher.• Entering names at a keyset
requires system software 3.06.02
or higher.
One-Touch Calling
• Storing a Flash command
requires system software
Base 2.13 or EXCPRU 2.18
or higher.• Storing a Flash command
requires system software.
One-Touch Serial Operation
• Available.• Available.
• Available ---- eight
External Paging zones and
eight alarm circuits
maximum.• Available ---- eight External
Paging zones and 16 alarm
circuits maximum.Paging, External
• Combined Paging is always
available.• Combined Paging is available
prior to system software 3.04
only if a PGDU is installed.
Paging, Internal
• Available ---- eight Internal
Paging Groups (Zones).• Available ---- 32 Internal Paging
Groups (Zones).
• Available ---- 8 System
Park orbits.• Available ---- 32 System Park
orbits.
• Personal Park requires Base
2.13, EXCPRU 2.18 or
higher.• Personal Park requires system
software 3.04 or higher.
• Enhanced Dial Buffering
not implemented.• Enhanced Dial Buffering
requires system software 3.06.06
or higher.
Park
• Splitting between calls on
Park keys not available.
 • Splitting between calls on Park
keys requires system software
3.06.14 or higher.
PBX Compatibility
• Available.• Available.
PC Attendant Console
• Not available.• Consult your sales
representative for availability.
Prime Line Selection
• Available.• Available.
Privacy (Data)
• Available.• Available.
Private Line
• Available.• Available. 
						

							384i/124i Feature Cross Reference
92000SWG08   Issue 1-0 Feature Cross Reference  XIFeature Name 124i 384i
Programmable Function Keys
• Available.• Available.
Pulse to Tone Conversion
• Available.• Available.
Repeat Redial
• Available.• Available.
Reverse Voice Over
• Available.• Available.
Ring Groups
• Available ---- 16 Ring
Groups.• Available ---- 128 Ring Groups.
Ringdown Extensions
• Available ---- 96
extensions/virtual
extensions and 24 Hotline
assignments.• Available ---- 384
extensions/virtual extensions
and 50 Hotline assignments (in
each Tenant Group).
Room Monitor
• Available.• Available.
Save Number Dialed
• Available.• Available.
Secretary Call (Buzzer)
• Available.• Available.
Secretary Call Pickup
• Available.• Available.
Selectable Display Messaging
• Available.• Available ---- system software
prior to 3.04 uses different
procedures and programmable
keys.
Selectable Ring Tones
• Available.• Available.
Serial Call
• Available.• Available.
• Available ----72 single line
telephones maximum.• Available ----255 single line
telephones maximum.
• Install 2-OPX Modules in
odd numbered ports only.
The system automatically
disables the next adjacent
port.• Install 2-OPX Modules in any
port. The system automatically
disables the next adjacent port.
• Analog Message Waiting
lamping not available.• Analog Message Waiting
lamping is available.
• Setting the DTMF criteria
requires Base 2.13,
EXCPRU 2.18 or higher.
Adjusting the side tone
level is not available.• Setting the DTMF criteria
requires system software 3.04 or
higher.
Single Line Telephones
• Loop Disconnect
Supervision for 2- OPX
Modules not available.• Loop Disconnect Supervision
for 2- OPX Modules requires
system software 3.06.02.
• Available.• Available.
• The RD/COST field and
Call Costing is available.• The RD/COST field and Call
Costing is only available in
system software prior to 3.07.10.
• Expanded ACCOUNT
column not available.
 • The ACCOUNT column is
expanded to 16 digits in 3.07.10
or higher.
Station Message Detail
Recording
• Year 2000 Compliance is
not available.• Year 2000 Compliance requires
system software 3.07.25 or
higher. 
						

							384i/124i Feature Cross Reference
XII  Feature Cross Reference 92000SWG08  Issue 1-0Feature Name 124i 384i
• Available ---- Basic T1
capabilities require
EXCPRU version 2.18 or
higher. T1 DID and tie lines
require a DTDU PCB.• Available ---- Customizing the
CODEC Gain Types requires
system software 3.04 or higher.
• ANI/DNIS Compatibility
requires EXCPRU 2.18 or
higher. It is not available in
Base software.• ANI/DNIS Compatibility
requires system software 3.06.02
or higher.
• ANI/DNIS routing to the
VAU Automated Attendant
requires EXCPRU software
4.02 or higher. Routing by
trunk to a specific VAU
message is also available in
EXCPRU 4.02 or higher.• ANI/DNIS routing to the VAU
Automated Attendant (page 447)
requires system software 3.06.09
or higher. Routing by trunk to a
specific VAU message requires
system software 3.07.10 or
higher.
• Enhanced Answer
Supervision for T1 tie
trunks requires Base 2.13,
EXCPRU 2.18 or higher.• Enhanced Answer Supervision
for T1 tie trunks requires system
software 3.05.15 or higher.
T1 Trunking (with ANI/DNIS
Compatibility
• Voice Mail Caller ID with
ANI/DNIS requires
EXCPRU version 2.18 or
higher.• Voice Mail Caller ID with
ANI/DNIS requires system
software 3.06.14 or higher.
• Available• Available ---- requires system
software 3.04 or higher.
• Basic TAPI commands
require the Nitsuko TAPI
Service Provider 1.02.02.• Basic TAPI commands available
in both Nitsuko TAPI Driver
versions.
• TAPI Enhancements require
Base 2.13 and EXCPRU
2.18 or higher.• TAPI Enhancements require
system software 3.06.02.
• Additional TAPI
Commands not available.• Additional TAPI Commands
require 384i Proprietary Mode
Telephony SPV 1.00.03 (or
higher) driver.
TAPI Compatibility
• Compatibility with the
Nitsuko 384i Proprietary
Mode Telephony SPV
1.00.03 (or higher) driver is
not available.• System software 3.07.12 or
higher provides compatibility
with the Nitsuko 384i
Proprietary Mode Telephony
SPV 1.00.03 (or higher) driver
through Program 0419:11.
• The system allows either 8
four-party conferences or 4
eight-party conferences.• Each DTU-A/C allows either 4
four-party conferences or 2
eight-party conferences per
PCB.Tandem Trunking
• Enhanced Tandem
Trunking requires Base
2.13, EXCPRU 2.18 or
higher.• Enhanced Tandem Trunking
requires system software 3.05.10
or higher. 
						

							384i/124i Feature Cross Reference
92000SWG08   Issue 1-0 Feature Cross Reference  XIIIFeature Name 124i 384i
• Available with EXCPRU
PCB only. DTMF tie lines
require a DTDU PCB.• Available.
• Customizing CODEC Gain
Type transmit and receive
levels and Tone Detection
Setup requires Base 2.13,
EXCPRU 2.18 or higher.• Customizing CODEC Gain Type
transmit and receive levels and
Tone Detection Setup require
system software 3.04 or higher.
Tie Lines
• Enhanced Answer
Supervision requires Base
2.13, EXCPRU 2.18 or
higher.• Enhanced Answer Supervision
requires system software 3.05.15
or higher.
• Available.• Available.Time and Date
• Year 2000 Compliance is
not available.• Year 2000 Compliance requires
system software 3.07.25 or
higher.
• Available ---- eight Toll
Restriction classes and 72
extensions.• Available ---- 15 Toll
Restriction Classes in each
Tenant Group and 256
extensions.Toll Restriction
• Digit counting (0702:4) not
required in order to use the
Permit and Restrict Code
Tables.• In system software 3.05.15 and
earlier, you must enable digit
counting (0702:4) in order to use
the Permit and Restrict Code
Tables.
Toll Restriction Override
• Available.• Available.
• Available ---- requires
EXCPRU 2.10 or higher
and an LAPB PCB. Not
available in Base software.• Available ---- requires system
software 3.04 or higher.Traffic Management Report
(TMS)
• Year 2000 Compliance is
not available.• Year 2000 Compliance requires
system software 3.07.25 or
higher.
• Available.• Available.Transfer
• MOH or ringback on
Transfer requires Base 2.13,
EXCPRU 2.18 or higher.• MOH or ringback on Transfer
requires system software 3.04 or
higher.
• Available ---- 16 trunk
groups and 36 routes.• Available ---- 128 trunk groups
and 64 routes.Trunk Group Routing
• Changing the Trunk Access
Code requires Base 2.13,
EXCPRU 2.18 or higher.• Changing the Trunk Access
Code requires system software
3.04 or higher.
Trunk Groups
• Available ---- 16 trunk
groups.• Available ---- 128 trunk groups.
Trunk Queuing/Camp On
• Available.• Available. 
						

							384i/124i Feature Cross Reference
XIV  Feature Cross Reference 92000SWG08  Issue 1-0Feature Name 124i 384i
• Available ---- install VAU
in odd numbered ports only.
The system reserves the
next adjacent port for the
expansion module (if
installed). If not installed,
the adjacent port is
disabled.• Available ---- Park and Page and
Personal Greeting have different
procedures prior to system
software 3.04.
• When a user presses 8 with
system software 2.13 Base,
2.18 EXCPRU or higher,
they hear the date
immediately after the time.• When a user presses 8 with
system software 3.06.02 or
higher, they hear the date
immediately after the time.
Voice Announce Unit
• The Voice Announce Unit
is Year 2000 Compliant and
will announce the year 2000
and above.• The Voice Announce Unit is
Year 2000 Compliant and will
announce the year 2000 and
above.
• Available.• Available.
• COS control over the
reminder message requires
Base 2.13, EXCPRU 2.18
or higher.• COS control over the reminder
message and requires system
software 3.04 or higher.
• Changing the DTMF tone
detection criteria requires
Base 2.13, EXCPRU 2.18
or higher.• Changing the DTMF tone
detection criteria setup requires
system software 3.04 or higher.
• To accommodate customer-
provided pagers, Base 2.13
and EXCPRU 2.18 or
higher can accept Park and
Page strings containing any
valid DTMF digits.• To accommodate customer-
provided pagers, system
software 3.05.09 and higher can
accept Park and Page strings
containing any valid DTMF
digits.
• In Base 2.13, EXCPRU
2.18 or higher, a line key
changes from red to green
when an AME users presses
CALL1 to intercept the call.• In system software 3.06.02 or
higher, a line key changes from
red to green when an AME users
presses CALL1 to intercept the
call.
• Voice Mail Caller ID with
ANI/DNIS requires
EXCPRU version 2.18 or
higher.• Voice Mail Caller ID with
ANI/DNIS requires system
software 3.06.14 or higher.
• Message Center Mailbox
requires Base 4.02,
EXCPRU 4.02 or higher.• Message Center Mailbox
requires system software
3.07.10.
Voice Mail
• Voice Mail key flashes red
when there are messages
waiting.
 • In system software 3.07.10 and
higher, Voice Mail key flashes
green when subscriber mailbox
has messages waiting. 
						

							384i/124i Feature Cross Reference
92000SWG08   Issue 1-0 Feature Cross Reference  XVFeature Name 124i 384i
Voice Mail (cont.)
• Year 2000 Compliance is
not available.• Year 2000 Compliance requires
system software 3.07.25 or
higher. Consult your Sales
Representative for applicable
NVM-Series Voice Mail
software.
Voice Over
• Available.• Available.
Volume Controls
• Available.• Available.
Warning Tone For long
Conversation• Available.• Available.
Year 2000 Compliance
• Available ---- unaffected by
the date change to the year
2000.  The system uses a
two-digit date code entry.
Future releases will use a
four-digit date code entry.• Available ---- system software
prior to 3.07.25 is unaffected by
the date change to the year
2000. The system uses a two-
digit date code entry.  With
system software 3.07.25 or
higher, the system uses a four-
digit date code entry. 
						

							384i/124i Feature Cross Reference
XVI  Feature Cross Reference 92000SWG08  Issue 1-0