NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 927 Issue 1 ASPAN : Assignment of Special Access Code for NDM ASPAN: Assignment of Special Access Code for NDM 1. General This command assigns the numbering plan data of the Network Control Node (NCN). The data assigned by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN). 2. Precautions 1. This command is used for the Business/Hotel (for Admin. station only) Application. 2. The applicable Tenant Number (TN) range is designated by the ASYDN command, SYS 1, INDEX 8. If the numbering plan is common for all tenants (ASYDN, SYS1, INDEX 800, bit1 = 1), assign TN parameter as “1” for all tenants. 3. For detailed information, see the NEAX2400 IPX Fusion Network System Manual.
CHAPTER 4 NDA-24298
Page 928
Issue 1
ASPAN : Assignment of Special Access Code for NDM
3. Data Entry Instructions
Access code (Max. 6 digits)TENANT
NUMBER
(TN)ACCESS CODE
(ACC)
MAX. 6 DIGITSCONNECTION STATUS
INDEX
(CI) N/H/B KIND OF
SERVICE
(SRV)
ACC
CISRV
OGCA = Outgoing call with route advanceSSCA = Service code appendix
LCR = Least cost routing
ANNC = Announcement Service
PAGC = Paging Cancel
TELN = Telephone Number N = Normal service
H = Hooking serviceSSC = Service code
OGC = Outgoing call
LCRS = Register sender LCR
ANNCM = Announcement Service (Multiple Announcement)
PAGA = Paging Answer
B = Busy service
2 (Dial Access to Attendant:
Operator Call)
38 Priority Call 2 37 Priority Call 1
39 Priority Call 3 FPC appears when the following SID is entered.SERVICE INDEX
(SID) 1-63FUSION POINT CODE
(FPC)NECESSARY DIGIT
(NND)NECESSARY DIGIT FOR
SPEED CALLING (NND1) 1-24
SID
FPC
SID Number of FPC
NND1
1-253
1-253
1-253
1-253 See Table 4-23When SRV= SSC (Service code) -SID2/37/38/39 is assigned
NND1 appears when SID=15. The number of ADC
(Abbreviation Digit Code) digits should be assigned
in NND1.
15 (Speed Calling-System;
Access)
42 (Authorization Code/Forced
Account Code/Pad Lock) 41 (Account Code Dial)
60 (Attendant Manual Override)
63 (Call Park ; Retrieve) NND appears when the following SID is entered.
NND data is variable depending on SIDNND
SID Number of digits for NNDAccess Code (1-24)
Access Code+Account
Code (1-15)
Access Code+Auth. Code
(1-15)
Access Code (1-5)
Access Code (1-3)
NDA-24298 CHAPTER 4 Page 929 Issue 1 ASPAN : Assignment of Special Access Code for NDM Note 1: When Split Call Forwarding is in service (the command ASYDN, SYS1, INDEX79, bit2 = 1), this access code is used for Split Call Forwarding service. The access codes for Call Forwarding service are specified by SRV = 3 (SSCA), SIDA 86-89. Note 2:The access code for the services marked * on Table 4-23 must be assigned with the same number of digit, if the access code begins using the same number. It is not available to assign different number of digit for the access codes (i.e. access code 100 and 10 cannot coexist) in these services. Table 4-30 SID (ASPAN) SID SERVICE NAME SID SERVICE NAME 1 Call Hold 30-34 - 2 Dial Access to Attendant (Operator Call) 35* Call Pickup - Direct 3Call Back; Entry/ Camp on By Station36 Hotel ServiceNote 3 4 Executive Right of Way 37* Priority Call 1 5 Call Waiting - Originating 38* Priority Call 2 6 Call Back; Cancel 39* Priority Call 3 7 Call Pickup - Group 40 - 8*Call Forwarding - All Calls/Split Call Forwarding - All Calls (for trunk); EntryNote 141* Account Code Dial 9Call Forwarding - All Calls/Split Call Forwarding - All Calls (for trunk); CancelNote 142*Authorization Code/Forced Account Code/Pad Lock; Set 10*Call Forwarding - Busy Line/Split Call Forward- ing - Busy Line (for trunk); EntryNote 143Flash Signal Sending to Main office across CAS line 11Call Forwarding - Busy Line/Split Call Forward- ing - Busy Line (for trunk); CancelNote 144 Last Number Call 12*Call Forwarding - Don’t Answer/Split Call For- warding - Don’t Answer (for trunk); Entry Note 145 - 13Call Forwarding - Don’t Answer/Split Call For- warding - Don’t Answer (for trunk); CancelNote 146 Faulty Trunk Report 14* Speed Calling - Station; Entry 47 - 15* Speed Calling - System; Access 48 Timed Reminder/Automatic Wake-up; Entry 16 Trunk Answer from Any Station (TAS) 49 Timed Reminder/Automatic Wake-up; Cancel 17* Individual trunk access 50-55 - 18 - 56 Floor ServiceNote 4 19 Out Going Trunk Queuing; Entry 57 Split Access (Same Number Access)Note 5 20 Out Going Trunk Queuing; Cancel 58, 59 - 21* Speed Calling - Station, Group; Access 60* Attendant Manual Override 22-27 - 61 Call Park; Entry 28 Call Forwarding I’m here; Set 62 Call Park; Local Retrieve 29 Call Forwarding I’m here; Cancel 63* Call Park; Remote Retrieve
CHAPTER 4 NDA-24298
Page 930
Issue 1
ASPAN : Assignment of Special Access Code for NDM
Note 3:
When SRV = SSC (Service code), SID36 (Hotel Service) is assigned
For more information about Hotel Service, refer to AASP command.
STATE
(Hotel Service Code)
1 To be cleaned without ID code
2 Cleaning Completed without ID code
3 Ready for Occupancy without ID code
4 Use Not Allowed without ID code
5-8 -
9 Maid Dial Answer Back without ID code-1
10 Maid Dial Answer Back without ID code-2
11 Maid Dial Answer Back without ID code-3
12 Maid Dial Answer Back without ID code-4
13 Maid Dial Answer Back without ID code-5
14 Maid Dial Answer Back without ID code-6
15 Maid Dial Answer Back without ID code-7
16 -
17 To be cleaned with ID code
18 Cleaning Completed with ID code
19 Ready for Occupancy with ID code
20 Use Not Allowed with ID code
21-24 -
25 Maid Dial Answer Back with ID code-1
26 Maid Dial Answer Back with ID code-2
27 Maid Dial Answer Back with ID code-3
28 Maid Dial Answer Back with ID code-4
29 Maid Dial Answer Back with ID code-5
30 Maid Dial Answer Back with ID code-6
31 Maid Dial Answer Back with ID code-7
32 -
33 Automatic Wake Up Setting, Cancel; Same Special code
34 For Guest Station Secretary Telephone; Boss/Secretary Calling
35 Boss/Secretary Busy out; Set
36 Boss/Secretary Busy out; Cancel
37 -
38 Automatic Wake-Up-Hotel Attendant Assistance Stop
39 Automatic Wake-Up-Hotel Attendant Assistance Stop Cancel
40 Alert Service Start (Hotel ATT)
41 Alert Service Stop (Hotel ATT)
42 Guest Service Telephone Screen Initialized
43 Guest Service Telephone Guest Room Information Retrieval
44 Direct Data Entry-Station (via Guest Station)
45 Alert Service Start (Special Admin. Station)
46 Alert Service Stop (Special Admin. Station)
47 -
48 2nd Wake-Up Call (Automatic) Set
49 2nd Wake-Up Call (Semi-Automatic) Set
50 2nd Wake-Up Call Cancel
51 Same Special Code Time Zone Connection Change
52 Same Special Code Time Zone Connection Change
53 Same Special Code Time Zone Connection Change
54 Same Special Code Time Zone Connection Change
55 Same Special Code Time Zone Connection Change
56-62 -
63 Dummy Number
Note: STATE=1-15 are used at the time of Maid ID Code Service is not provided;
(ASYD SYS1 INDEX 164, bit3=0)
STATE=17-31 are used at the time of Maid ID Code Service is provided;
(ASYD SYS1 INDEX 164, bit3=1)
SERVICE INDEX
(SID) 1-63
STATE
36
NDA-24298 CHAPTER 4
Page 931
Issue 1
ASPAN : Assignment of Special Access Code for NDM
Note 4:
When SRV = SSC (Service code), SID 56 (Floor Service) is assigned
Note 5:When SRV = SSC (Service code), SID 57 (Split Access) is assigned
For more information about Hotel Service, refer to AASP command.
SERVICE INDEX
(SID) 1-63 NO.1
56
NO.1
(Kind of Assignment Number)
Available numbers are 0-15.
This data is used to assign Floor Service data by the ASPF
command.
Note: When programming Floor Service data, ASYD SYS1
INDEX 165, bit7=1 must have been assigned.
SERVICE INDEX
(SID) 1-63NO.2KIND
57
NO.2
This parameter specifies the number (0-63) of the
access code being assigned for mutual access.
This parameter serves as a counter for the access
codes being assigned.
Note: This parameter is used when assigning the
details of the service by the ASPS command.
KIND: (0-3)
This parameter specifies the Split Access Parameter Classification. The data to
be assigned here depends on how the Guest and Administration stations are
differentiated.
The Guest and Administration stations may be assigned to separate TNs, RSCs,
and/or SFCs, or they may only be differentiated by their respective designations
as Administration or Guest.
0: Administration/Guest
(Assign this if the access code is to be shared between Guest
and Administration with no correspondence to TN, RSC or SFC.)
1: TN
(Assign this if the access code is to be shared among specified TNs)
2: RSC
(Assign this if the access code is to be shared among specified RSCs)
3: SFC
(Assign this if the access code is to be shared among specified SFCs)
CHAPTER 4 NDA-24298 Page 932 Issue 1 ASPAN : Assignment of Special Access Code for NDM Note 1: This data is valid for Call Forwarding service when Split Call Forwarding is in service. (The command ASYDN, SYS 1, INDEX 79, bit2=1.) Note 2:This data can be set when CI=N (Normal). Note 3:The access code for the services marked * on Table 4-24 must be assigned with the same number of digit, if the access code begins using the same number. It is not available to assign different number of digit for the access codes (i.e. access code 100 and 10 cannot coexist) in these services. Table 4-31 SIDA (ASPAN) SIDA SERVICE NAME SIDA SERVICE NAME 1-40 - 69-84 - 41 Voice Call 85* Pad Lock; Cancel 42 Message Reminder (D term) 86* Call Forwarding-All Calls; EntryNote 1 43-45 - 87* Call Forwarding-Busy Line; EntryNote 1 46 Line Load Control from ATTCON; Entry 88* Call Forwarding-Don’t Answer; EntryNote 1 47 Line Load Control from ATTCON; Cancel 89 Call Forwarding-All Calls; CancelNote 1 48 Data Privacy on Demand; EntryNote 290 Call Forwarding-Busy Line; CancelNote 1 49 Data Privacy on Demand; Cancel 91 Call Forwarding-Don’t Answer; CancelNote 1 50* UCD Busy out; Entry 92-96 - 51* UCD Busy out; Cancel 97* Call Hold conference 52 - 98 Internal Zone Paging; Originate 53 Boss Secretary Override 99-105 - 54*Message Waiting Lamp Setting from ATTCON; Set106 Call Return 107 - 55*Message Waiting Lamp Setting from ATTCON; Cancel108 Number Sharing; Entry 56 Guest/Admin. Service 109 Number Sharing; Cancel 57-62 - 110 - 63 Call Pickup Expand 111Call Block (restricts the last calling party’s num- ber); Entry 64-65 - 112 Call Block (restricts the dialed number); Entry 66Digital Announcement Card Multi-channel Re- cording; Record113 Call Block; Cancel 114-115 - 67 - 116 Call Trace 68*Digital Announcement Card Multi-channel Re- cording Retrieve117-255 Not used. SERVICE INDEX A (SIDA) 1-255 When SRV=SSCA (Service code appendix) is assigned: NND appears when SIDA = 97 (Call Hold Conference). The number of digits for an access code should be assigned in NND. NECESSARY DIGIT (NND) 1-6NND
NDA-24298 CHAPTER 4 Page 933 Issue 1 ASPAN : Assignment of Special Access Code for NDM LOGICAL ROUTE NUMBER (LGRT) When SRV=OGC (Outgoing call) is assigned Assign a dummy route number.LGRT Second dial tone sending (which is sent when a station has dialed the digits specified in NND of the ANPDN command) 0 = Second DT is not sent 1 = Second DT is sent 2nd DTAuthorization code after dialing ACC (LCR) + Destination number 0 = Out of Service 1 = In ServiceAH ISDN-Sub Address Dialing 0 = Out of Service 1 = In ServiceSUB LOGICAL ROUTE NUMBER (LGRT)SECOND DIAL TONE (2nd DT) 0/1AUTHORIZATION CODE (AH) 0/1SUB ADDRESS DIALING (SUB) 0/1 CNT (1-15)LOGICAL ROUTE NUMBER (LGRT) When SRV = OGCA (Outgoing call with route advance) is assigned When SRV = LCR (Least cost routing) is assigned When SRV = LCRS (Register sender LCR) is assigned CNT CNT is the route advance order. 1 2 3
CHAPTER 4 NDA-24298 Page 934 Issue 1 ASPAN : Assignment of Special Access Code for NDM LOGICAL ROUTE NUMBER (LGRT) 1-899 When SRV=PAGA (Paging Answer) is assigned When SRV=PAGC (Paging Cancel) is assigned LGRT Enter the Logical Route Number of Paging Trunk. Assign the announce equipment number. See Table 4-6. When SRV=ANNC (Announcement service) is assigned ANNOUNCEMENT EQUIPMENT NUMBER (EQP) 0-127 EQP Assign the tenant number of the announcement trunk. When SRV=ANNCM (Announcement service-Multiple announcement) is assigned TNTENANT NUMBER (TN) 1-63 ANNOUNCEMENT EQUIPMENT NUMBER (EQP) 122-125 Assign the announcement equipment number with a range from 122 to 125 (Multi announcement). EQP MAXIMUM NUMBER OF DIGIT (NND) 1-16 When SRV=TELN (Telephone Number)
NDA-24298 CHAPTER 4 Page 935 Issue 1 ASPAN : Assignment of Special Access Code for NDM 4. Data Sheet (a) Service code (SRV = SSC) Note 1:The parameter may vary depending on the service. Note 2:When Split Call Forwarding is in service (the command ASYD, SYS1, INDEX79, bit2=1), this access code is used for Split Call Forwarding. Note 3:When Speed Calling-System; Access is assigned, NND1 parameter assignment is also required in addition to NND parameter. Note 4:Fill in the FPC in place of the parameter NND. TENANT NUMBER (TN)ACCESS CODE (ACC) MAXIMUM 6 DIGITSCONNECTION STATUS INDEX (CI) N/H/BKIND OF SERVICE (SRV)SERVICE FEATURE INDEX (SID) 1–63NUMBER OF NECESSARY DIGITS (NND) Note 1SERVICE CONTENTS H Hooking SSC 1Call Hold NNormal SSC 2Dial Access to Attendant (Operator Call)Note 4 H Hooking BBusy SSC 3 Call Back; Entry H Hooking Camp on By Station BBusy SSC 4 Executive Right of Way NNormal SSC 5 Call Waiting – Originating BBusy NNormal SSC 6 Call Back; Cancel NNormal SSC 7 Call Pickup – Group NNormal SSC 8 C.F. – All Calls/Split C.F. – All Calls; EntryNote 2 NNormal SSC 9 C.F. – All Calls/Split C.F. – All Calls; CancelNote 2 NNormal SSC 10 C.F. – Busy Line/Split C.F. – Busy Line; Entry Note 2 NNormal SSC 11 C.F. – Busy Line/Split C.F. – Busy Line; CancelNote 2 NNormal SSC 12 C.F. – Don’t Answer/Split C.F. – Don’t Answer; Entry Note 2 NNormal SSC 13 C.F. – Don’t Answer/Split C.F. – Don’t Answer; Can- cel Note 2 NNormal SSC 14 Speed Calling – Station; Entry NNormal SSC 15Speed Calling – System; AccessNote 3 NNormal SSC 16 Trunk Answer from Any Station (TAS) NNormal SSC 17 Individual Trunk Access 18Not used
CHAPTER 4 NDA-24298 Page 936 Issue 1 ASPAN : Assignment of Special Access Code for NDM (a) Service code (SRV = SSC) (Continued) Note 1:The parameter may vary depending on the service. Note 2:The available numbers of necessary digits vary depending on the parameter SID. Note 3:For detailed information of Hotel Service assignment, refer to the AASP command. Note 4:Fill in the FPC in place of NND. TENANT NUMBER (TN)ACCESS CODE (ACC) MAXIMUM 6 DIGITSCONNECTION STATUS INDEX (CI) N/H/BKIND OF SERVICE (SRV)SERVICE FEATURE INDEX (SID) 1–63NUMBER OF NECESSARY DIGITS (NND) Note 1, Note 2SERVICE CONTENTS B Busy SSC 19OG Trunk Queuing; Entry N Normal SSC 20 OG Trunk Queuing; Cancel N Normal SSC 21 Speed Calling – Station, Group; Access 22 27 Not used N Normal SSC 28 Call Forwarding I’m Here; Set N Normal SSC 29 Call Forwarding I’m Here; Cancel 30 34 Not used N Normal SSC 35 Call Pickup – Direct N Normal SSC 36 Hotel ServiceNote 3 NNormal SSC 37 Priority Call 1Note 4 H Hooking NNormal SSC 38 Priority Call 2Note 4 H Hooking NNormal SSC 39 Priority Call 3Note 4 H Hooking 40Not used NNormal SSC 41 Account Code Dial H Hooking NNormal SSC 42Authorization Code/Forced Account Code/Pad Lock; Set H Hooking H Hooking SSC 43 Flash Signal Sending to Main office across CAS Line N Normal SSC 44 Last Number Call 45Not Used H Hooking SSC 46 Faulty Trunk Report ~ ~