Home > NEC > Communications System > NEC Neax 2400 Ipx Office Data Specification

NEC Neax 2400 Ipx Office Data Specification

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1020
    Add page 731 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 697
Issue 1
AUAD : Assignment of UCD Delayed Announcement Data
3. Data Entry Instructions
NUMBER OF 
ANNOUNCEMENT 
TRUNK
(CNT)
1-8 CONTROLLING
 STATIONANNOUNCEMENT 
TRUNK
TN and STN
DLYT
Enter the delay timer value in second with a range of 0-
30 seconds.  (2 seconds increments) TN and STN (UCD pilot station number) parameters should be assigned with respect to the TN and 
STN data assigned by the ASHU command.
1
2
MSGT
RP
Announcement replay
0 = Once
1 = Repeat within the time specified by the INT parameter
INT
The INT parameter appears when RP = 1.
Enter the replay interval time value in seconds with a range 
of 0-30 seconds.  (2 seconds increments)
CNT
The number of external trunks to be connected to 
an external announcement machine.
DELAY 
TIMER 
(DLYT) 
0-30TRUNK
NUMBER 
(TK)  ROUTE
NUMBER 
(RT)  MESSAGE 
TIMER 
(MSGT) 
0-30ANNOUNCE-
MENT 
OUTPUT 
REPLAY 
(RP)
0/1REPLAY 
INTERVAL 
(INT) 
0-30 TENANT 
NUMBER 
(TN)STATION 
NUMBER 
(STN)
Enter the message timer value in seconds within 0-30 seconds. 
 (2 seconds increments)
However, this value is not effective if the Route data of 
Announcement Trunk is assigned as follows: 
   ARTD ANS = 1
    Add page 732 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 698
Issue 1
AUAD : Assignment of UCD Delayed Announcement Data
4. Data Sheet
CONTROLLING
STATIONDELAY
TIMER
(DLYT)
0-30MESSAGE
TIMER
(MSGT)
0-30ANNOUNCEMENT
OUTPUT
REPLAY
(RP)
0/1REPLAY
INTERVAL
(INT)
2-30NUMBER OF
ANNOUNCEMENT
TRUNK 
(CNT)
1-8ANNOUNCEMENT
TRUNK
TENANT
NUMBER
(TN)STATION
NUMBER
(STN)ROUTE
NUMBER
(RT)TRUNK 
NUMBER
(TK)
1
2
3
4
5
6
7
8
    Add page 733 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 699
Issue 1
AUADL : Assignment of UCD Delayed Announcement Data for LDM
AUADL:  Assignment of UCD Delayed Announcement Data for LDM
1. General
This command assigns the data related to the Delay Announcement - UCD service feature for each Node by
using Telephone Number. The data is written in the Local Data Memory (LDM).
2. Precautions
1. Assign the Telephone Number (LDM) of the UCD member station by using the ASHUL command.
2. A maximum of eight (8) external announcement machines can be assigned per a UCD group.
3. As to the designation of sharing the UCD Announcement Information (ASYDL, SYS 1, INDEX 804, bit
4 : 0/1 = per UCD group/Common), be sure to follow the note as mentioned below:
In case the system data (ASYDL, SYS 1, INDEX 804, bit 4) shall be modified after the UCD
Announcement Information has already been assigned, first clear all the data assigned by this command
(AUADL), then the new data is to be reassigned.
    Add page 734 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 700
Issue 1
AUADL : Assignment of UCD Delayed Announcement Data for LDM
3. Data Entry Instructions
NUMBER OF 
ANNOUNCEMENT 
TRUNK
(CNT)
1-8 CONTROLLING STATION
ANNOUNCEMENT 
TRUNK
UGN and TELN
DLYT
Enter the delay timer value in second with a range of 0-
30 seconds.  (2 seconds increments) UGN is fixed to “1”.
Enter the TELN (LDM) of the UCD pilot station 
with respect to the data assigned by the ASHUL 
command.
1
2
RP
Announcement replay
0 = Once
1 = Repeat within the time specified by the INT parameter
INT
The INT parameter appears when RP = 1.
Enter the replay interval time value in seconds with a range 
of 0-30 seconds.  (2 seconds increments)
CNT
The number of external trunks to be connected to 
an external announcement machine.Enter the Route Number of 
the Announcement Trunk
DELAY 
TIMER 
(DLYT) 
0-30TRUNK
NUMBER 
(TK) 
1-768 ROUTE
NUMBER 
(RT)  MESSAGE 
TIMER 
(MSGT) 
0-30ANNOUNCE-
MENT 
OUTPUT 
REPLAY 
(RP)
0/1REPLAY 
INTERVAL 
(INT) 
0-30 USER 
GROUP
NUMBER 
(UGN)TELEPHONE NUMBER
 (TELN)
MAX. 16 DIGITS
MSGT RT 1
Enter the message timer value in seconds within 0-30 
seconds. (2 seconds increments)
However, this value is not effective if the Route data 
of Announcement Trunk is assigned as follows: 
   ARTD ANS = 1
    Add page 735 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 701
Issue 1
AUADL : Assignment of UCD Delayed Announcement Data for LDM
4. Data Sheet
CONTROLLING STATION
USER
GROUP
NUMBER
(UGN)TELEPHONE NUMBER
(TELN)
MAX.16  DIGITS
DELAY
TIMER
(DLYT)
0-30MESSAGE
TIMER
(MSGT)
0-30ANNOUNCEMENT
OUTPUT
REPLAY
(RP)
0/1REPLAY
INTERVAL
(INT)
2-30NUMBER OF
ANNOUNCEMENT
TRUNK 
(CNT)
1-8ANNOUNCEMENT
TRUNK
ROUTE
NUMBER
(RT)TRUNK 
NUMBER
(TK)
1-768
1
2
3
4
5
6
7
8
CONTROLLING STATION
USER
GROUP
NUMBER
(UGN)TELEPHONE NUMBER
(TELN)
MAX.16  DIGITS
DELAY
TIMER
(DLYT)
0-30MESSAGE
TIMER
(MSGT)
0-30ANNOUNCEMENT
OUTPUT
REPLAY
(RP)
0/1REPLAY
INTERVAL
(INT)
2-30NUMBER OF
ANNOUNCEMENT
TRUNK 
(CNT)
1-8ANNOUNCEMENT
TRUNK
ROUTE
NUMBER
(RT)TRUNK 
NUMBER
(TK)
1
2
3
4
5
6
7
8
    Add page 736 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 702
Issue 1
AUADN : Assignment of UCD Delayed Announcement Data for NDM
AUADN:  Assignment of UCD Delayed Announcement Data for NDM
1. General
This command assigns the data related to the Delay Announcement - UCD for Fusion Service. The data assigned
by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating
the NDM at each Local Node (LN).
2. Precautions
1. Assign the Telephone Number (NDM) of the UCD member station by using the ASHUN command.
2. A maximum of eight (8) external announcement machines can be assigned per a UCD group.
3. As to the designation of sharing the UCD Announcement Information  (ASYDL, SYS 1, INDEX 804, bit
4 : 0/1 = per UCD group/Common), be sure to follow the notes mentioned below:
Common in all the UCD groups (b4 = 1 is assigned) means the UCD Announcement Information is
common in each  Node.
In case the system data (ASYDL, SYS 1, INDEX 804, bit 4) shall be modified after the UCD
Announcement Information has already been assigned, first clear all the data assigned by this command
(AUADN), then the new data is to be reassigned.
    Add page 737 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 703
Issue 1
AUADN : Assignment of UCD Delayed Announcement Data for NDM
3. Data Entry Instructions
NUMBER OF 
ANNOUNCEMENT 
TRUNK
(CNT)
1-8 CONTROLLING
 STATIONANNOUNCEMENT 
TRUNK
UGN and TELN
DLYT
Enter the delay timer value in second with a range of 0-
30 seconds.  (2 seconds increments) UGN is fixed to “1”.
Enter the TELN (NDM) of the UCD pilot station with respect to the data assigned by the ASHUN 
command.
1
2
MSGT
RP
Announcement replay
0 = Once
1 = Repeat within the time specified 
       by the INT parameter
INT
The INT parameter appears when RP = 1.
Enter the replay interval time value in seconds with a range 
of 0-30 seconds.  (2 seconds increments)Enter the Logical Route Number of the 
Announcement Trunk. (Announcement Trunk 
should be mounted on the same node in which the 
UCD pilot station is accommodated.
CNT
LGRT The number of external trunks 
to be connected to an external
announcement machine.
DELAY 
TIMER 
(DLYT) 
0-30TRUNK
NUMBER 
(TK)  LOGICAL
ROUTE
NUMBER 
(LGRT)  MESSAGE 
TIMER 
(MSGT) 
0-30ANNOUNCE-
MENT 
OUTPUT 
REPLAY 
(RP)
0/1REPLAY 
INTERVAL 
(INT) 
0-30 USER 
GROUP
NUMBER 
(UGN)TELE-
PHONE
NUMBER 
(TELN)
Enter the message timer value in seconds within 0-30 seconds. 
(2 seconds increments)
However, this value is not effective if the Route data of 
Announcement Trunk is assigned as follows: 
   ARTDN ANS = 1
    Add page 738 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 704
Issue 1
AUADN : Assignment of UCD Delayed Announcement Data for NDM
4. Data Sheet
CONTROLLING
STATION
DELAY
TIMER
(DLYT)
0-30MESSAGE
TIMER
(MSGT)
0-30ANNOUNCEMENT
OUTPUT
REPLAY
(RP)
0/1REPLAY
INTERVAL
(INT)
2-30NUMBER OF
ANNOUNCEMENT
TRUNK 
(CNT)
1-8ANNOUNCEMENT
TRUNK
USER
GROUP
NUMBER
(UGN)TELEPHONE
NUMBER
(TELN)LOGICAL
ROUTE
NUMBER
(LGRT)TRUNK 
NUMBER
(TK)
1
2
3
4
5
6
7
8
    Add page 739 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 705
Issue 1
ACPG : Assignment of Call Pickup Group
ACPG: Assignment of Call Pickup Group
1. General
This command assigns call pickup group in the TN and STN.
2. Precautions
1. The maximum number of member stations within each Call Pickup Group is 100. 
2. The access code of the Call Pickup Group is assigned by the ASPA command SSC, SID = 7.
3. There is no limitation in a Call Pickup Group within a system.
4. The station can be assigned to only one Call Pickup Group. An extension can be assigned to only one Call
Pickup Group.
5. The phantom number assigned by the APHN command cannot be a member station of the Call Pickup
Group. 
6. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. 
3. Data Entry Instructions
Note:Enter the Station Number to be assigned in “EDIT STN” box on the display.
NUMBER 
OF 
STATIONS 
(CNT)NUMBER 
OF 
STATIONS 
(CNT) TENANT NUMBER
 (TN)
1-63STATION NUMBER 
(STN)
STATION 
NUMBER 
(STN)STATION 
NUMBER 
(STN)STATION 
NUMBER 
(STN)STATION 
NUMBER 
(STN) NUMBER 
OF 
STATIONS 
(CNT)NUMBER 
OF 
STATIONS 
(CNT)
STN
Assign a station number
2
327
2852
5377
78
    Add page 740 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 706
Issue 1
ACPG : Assignment of Call Pickup Group
4. Data Sheet
TENANT NUMBER (TN) STATION NUMBER (STN)
NUMBER 
OF
STATIONS
(CNT)STATION 
NUMBER 
(STN)NUMBER OF
STATIONS
(CNT)STATION 
NUMBER 
(STN)NUMBER 
OF
STATIONS
(CNT)STATION 
NUMBER 
(STN)NUMBER 
OF
STATIONS
(CNT)STATION 
NUMBER 
(STN)
22752 77
32853 78
42954 79
53055 80
63156 81
73257 82
83358 83
93459 84
10 35 60 85
11 36 61 86
12 37 62 87
13 38 63 88
14 39 64 89
15 40 65 90
16 41 66 91
17 42 67 92
18 43 68 93
19 44 69 94
20 45 70 95
21 46 71 96
22 47 72 97
23 48 73 98
24 49 74 99
25 50 75 100
26 51 76
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Ipx Office Data Specification