NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 847 Issue 1 AEVT : Assignment of Virtual Tie Line Data for Event Based CCIS ♦ When FUNC=2 is assigned FUNCTION POINT CODE (PC) 1-16367ROUTE NUMBER (RT) 1-255 2 PC Point code of terminating nodeRT Enter the E-CCIS route number for each terminating node
CHAPTER 4 NDA-24298 Page 848 Issue 1 AEVT : Assignment of Virtual Tie Line Data for Event Based CCIS 4. Data Sheet (a) FUNCTION = 1 and TYPE = 1/2 (OPR and RA parameters are available for TYPE = 2) ROUTE NUMBER (RT) 1-255TRUNK NUMBER (TK) 1-255DESTINATION NUMBER (DESTINATION) 1-6CALLING NUMBER (CALLING) 1-24 CALLED NUMBER (CALLED) 1-24CCIS_RT 1-255CCIS_TK 1-255VRY 0/1OPR 1-4000RA 0-7
NDA-24298 CHAPTER 4 Page 849 Issue 1 AEVT : Assignment of Virtual Tie Line Data for Event Based CCIS (b) FUNCTION = 1 and TYPE = 3/4 (“OPR” and “RA” parameters are available for TYPE = 4) ROUTE NUMBER (RT) 1-255TRUNK NUMBER (TK)DESTINATION NUMBER (DESTINATION) 1-6CALLING NUMBER (CALLING) 1-24 0 CALLED NUMBER (CALLED) 1-24ISDN_RT 1-255VRY 0/1OPR 1-4000RA 0-7
CHAPTER 4 NDA-24298 Page 850 Issue 1 AEVT : Assignment of Virtual Tie Line Data for Event Based CCIS (c) FUNCTION = 2 (E-CCIS RT is set for each terminating node) POINT CODE (PC) 1-16367ROUTE NUMBER (RT) 1-255
NDA-24298 CHAPTER 4 Page 851 Issue 1 AITD : Assignment of ISDN Terminal Data AITD: Assignment of ISDN Terminal Data 1. General This command assigns ISDN terminal data and FID to only B1 channel. 2. Precautions None 3. Data Entry Instructions FUNCTION (FUNC) 1/2TENANT NUMBER (TN) 1-63STATION NUMBER (STN) Max. 6 digitsTERMINAL TYPE (TYPE) 1-nFID PATTERN (FIDP) 1-31FEATURE IDENTIFIER DATA (FID) 1-127 FUNC 1 = Terminal information 2 = Feature Identifier Data (FID) FID This parameter is required only when “FUNC = 2” is entered.TYPE 1 = N-ISDN1 FIDP Enter the FID Pattern. Enter the Station Number when “1” is assigned at FUNC parameter.STNEnter the Tenant Number when “1” is assigned at FUNC parameter.TN
CHAPTER 4 NDA-24298 Page 852 Issue 1 AITD : Assignment of ISDN Terminal Data 4. Data Sheet FUNCTION (FUNC) 1/2TENANT NUMBER (TN) 1-63STATION NUMBER (STN) Max. 6 digitsTERMINAL TYPE (TYPE) 1-nFID PATTERN (FIDP) 1-31FEATURE IDENTIFIER DATA (FID) 1-127
NDA-24298 CHAPTER 4 Page 853 Issue 1 AITD_T : Assignment of ISDN Terminal Data – Telephone Number AITD_T : Assignment of ISDN Terminal Data – Telephone Number 1. General This command is used to assign ISDN terminal data and FID to only B1 channel. The station data of AITD command can be assigned by using Telephone Number. 2. Precautions 1. Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the ALGSL command is not available in this command. 2. In case logging in to a LN, only the Telephone Numbers allocated to the stations within the logged-in node can be used in this command. Also, when logging in to the NCN, the data memory of the whole nodes in the network is to be written. 3. Data Entry Instructions FUNCTION (FUNC)USER GROUP NUMBER (UGN)TERMINAL TYPE (TYPE) 1-nFID PATTERN (FIDP) 1-31FEATURE IDENTIFIER DATA (FID) 1-127TELEPHONE NUMBER (TELN) Max. 16 digits FUNC Terminal Information Feature Identifier Data (FID)FID This parameter is required only when FUNC = FID is entered. 1 1 1 TELN Enter the Telephone Number of the designated station. This parameter appears when FUNC = Terminal Information is selected. TYPE 1=N-ISDN1 FIDP Enter the FID Pattern.
CHAPTER 4 NDA-24298 Page 854 Issue 1 AITD_T : Assignment of ISDN Terminal Data – Telephone Number 4. Data Sheet FUNCTION (FUNC)USER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN) Max. 16 digitsTERMINAL TYPE (TYPE) 1-nFID PATTERN (FIDP) 1-31FEATURE IDENTIFIER DATA (FID) 1-127
NDA-24298 CHAPTER 4 Page 855 Issue 1 ACRD : Assignment of Connection Route Class Data for Local Data Memory ACRD: Assignment of Connection Route Class Data for Local Data Memory 1. General This command assigns the related data for the connection route used for B-channel and D-channel in the Fusion Network link. 2. Precautions 1. The available connection route numbers are 1-1023. 2. For detailed information, see the NEAX2400 IPX Fusion Network System Manual. 3. Data Entry Instructions Refer to data sheet in Section 4.
CHAPTER 4 NDA-24298 Page 856 Issue 1 ACRD : Assignment of Connection Route Class Data for Local Data Memory 4. Data Sheet CDNCONNECTION RT No. (C_RT) 1-1023 FUNCTION (FUNC) 1TF - Type of Trunk 0 - 2 = - 3 = Bothway Trunk (BWT)33333 3 2TCL - Trunk Class (Fixed “4”) 1-3 = - 4 = Fusion Trunk 5-31 = -44444 4 3RLP - Trunk Release Pattern (Fixed “2”) 0-1 = - 2 = First party Release 3=-22222 2 4SMDR - Detailed Billing Information (Fixed “0”) 0 = SMDR is out of service 1 = SMDR is in service00000 0 5LSG - Line Signal 0-11 = - 12 = B-channel 13 = D-channel 14, 15 = - 6PA D - PAD control 0 = Depending on the assignment of PAD parameter in ARTD command. 1 = 8 dB for sending, 0dB for receiving. 2=4 dB 3 = 8 dB for sending, 12 dB for receiving. 4=8 dB 5=Not used 6=Not used 7=0 dB Standard data = 7 (0 dB) 7TRKS - Trunk Selection Sequence 0 = Select from the trunk which becomes idle first 1 = Select from the trunk which becomes idle last00000 0 8TC/EC (Fixed “0”) 0=No MPC/EC 1=EC 2=MPC 3=Not used