Home > NEC > Communications System > NEC Neax 2400 Ipx Office Data Specification

NEC Neax 2400 Ipx Office Data Specification

    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1020
    							NDA-24298 CHAPTER 4
    Page 827
    Issue 1
    AFCP_T : Assignment of Call Forwarding Service by Calling Number – Telephone Number
    AFCP_T : Assignment of Call Forwarding Service by Calling Number – Te l e -
    phone Number
    1. General
    This command is used to assign/delete the data related to the Calling Party Recognition Service of ISDN. The
    station data of AFCP command can be assigned by using Telephone Number instead.
    2. Precautions
    1. Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the
    ALGSL command is not available in this command.
    2. In case logging in to a LN, only the Telephone Numbers allocated to the stations within the logged-in
    node can be used in this command. Also, when logging in to the NCN, the data memory of the whole
    nodes in the network is to be written.
    3. When the Call Forwarding Destination is a trunk line, assign the Abbreviated Digit Code for the trunk line
    using the ASPD command.
    4. Data can be entered on a Day/Night basis if specified in the ASYD command, SYS1, INDEX 76, b2=1.
    5. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX 8.
    6. The CALLING PARTY parameter may be treated as:
    (a) All digits (Called Station Number + Access code assigned by the DC parameter of the ACND 
    command + Calling Party Number)
    (b) Some portions are ignored
    Example:Ignore 003, where 003 is the access code.
    (c) The entire number is ignored, reverting back to traditional Call Forwarding services.
    7. The Calling Party Recognition Service affects when the Bearer Capability of the calling party is “Speech”
    or “3.1 kHz audio”. (“Unrestricted digital data” is not available.) 
    						
    							CHAPTER 4 NDA-24298
    Page 828
    Issue 1
    AFCP_T : Assignment of Call Forwarding Service by Calling Number – Telephone Number
    3. Data Entry Instruction
    Note:The existing data can be readout by pressing “Get” button after UGN and TELN data is entered.
    CALL
    FORWARDING
    SERVICE
    FEATURE
    (CFSI)INFORMATION
    TRANSFER
    (ITC)ABBREVIATED
    DIGIT CODE
    (ADC)
    Max. 4 digits DAY/NIGHT
    (D/N)USER
    GROUP
    NUMBER
    (UGN)
    CALL FORWARDING
    DESTINATION
    (CFD)
    TELEPHONE NUMBER 
    (TELN)
    Max. 16 digits CALLING PARTY NUMBER
    (CALLING PARTY)
    Max. 32 digits
    CALLING PARTY
    Called Station Number + ACC (
    Note) + Calling Party Number
    Note:   Enter the Access Code assigned in the ACND command.
    ITC
      Speech
      Unrestricted (Digital Data)
      Audio (MODEM)CFD
      Telephone Number
      ATT
      External
      Not used.
    CFSI
      Call Forwarding – All Calls
      Call Forwarding – Busy Line
      Call Forwarding – Dont Answer
      Direct-In Termination
    ADC
    Enter the Abbreviated Digit Code 
    for the trunk line assigned by 
    ASPD command. This parameter 
    appears when CFD = External is 
    selected.
    TELN
    Enter the Telephone Number of 
    destination station. This parameter 
    appears when CFD = Telephone 
    Number is selected. 
    						
    							NDA-24298 CHAPTER 4
    Page 829
    Issue 1
    AFCP_T : Assignment of Call Forwarding Service by Calling Number – Telephone Number
    4. Data Sheet
    (a) Call Forwarding Destination is a station (CFD = Telephone Number).  
    DAY/NIG HT
    (D/N)USER
    GROUP
    NUMBER
    (UGN)CALLING PARTY NUMBER
    (CALLING PARTY)
    Max. 32 digits
    CALL
    FORWARDING
    SERVICE
    FEATURE
    (CFSI)INFORMATION
    TRANSFER
    (ITC)CALL FORWARDING
    DESTINATION
    (CFD)TELEPHONE NUMBER
    (TELN)
    Max. 16 digitsREMARKS
    TELN
    DAY/NIGHT UGNCALLING PARTY 
    Max. 32 digits
    CFSI ITC CFDTELN
    Max. 16 digitsREMARKS
    TELN
    DAY/NIGHT UGNCALLING PARTY 
    Max. 32 digits
    CFSI ITC CFDTELN
    Max. 16 digitsREMARKS
    TELN
    DAY/NIGHT UGNCALLING PARTY
    Max. 32 digits
    CFSI ITC CFDTELN
    Max. 16 digitsREMARKS
    TELN
    DAY/NIGHT UGNCALLING PARTY 
    Max. 32 digits
    CFSI ITC CFDTELN
    Max. 16 digitsREMARKS
    TELN
    DAY/NIGHT UGNCALLING PARTY
    Max. 32 digits
    CFSI ITC CFDTELN
    Max. 16 digitsREMARKS
    TELN 
    						
    							CHAPTER 4 NDA-24298
    Page 830
    Issue 1
    AFCP_T : Assignment of Call Forwarding Service by Calling Number – Telephone Number
    (b) Call Forwarding Destination is an ATTCON (CFD = ATT)
    (c) Call Forwarding Destination is a C.O. Line (CFD = External)
    D/N UGNCALLING PARTY NUMBER
    (CALLING PARTY) 
    Max. 32 digitsCALL
    FORWARDING
    SERVICE
    FEATURE 
    (CFSI)INFORMATION
    TRANSFER (ITC)CALL 
    FORWARDING
    DESTINATION (CFD)
    AT T
    AT T
    AT T
    AT T
    AT T
    AT T
    AT T
    AT T
    AT T
    AT T
    AT T
    AT T
    AT T
    D/N UGNCALLING PARTY NUMBER
    (CALLING PARTY) 
    Max. 32 digitsCALL
    FORWARD-
    ING
    SERVICE
    FEATURE 
    (CFSI)INFORMA-
    TION
    TRANSFER
    (ITC)CALL 
    FORWARD-
    ING
    DESTINA-
    TION
    (CFD)ABBREVI-
    AT E D
    DIGIT
    CODE
    (ADC)
    Max. 4 digits
    External
    External
    External
    External
    External
    External
    External
    External
    External
    External
    External
    External
    External 
    						
    							NDA-24298 CHAPTER 4
    Page 831
    Issue 1
    ACBC : Assignment of Call by Call Service Data
    ACBC: Assignment of Call by Call Service Data
    1.  General
    This command assigns the Call by Call Information for an ISDN Network.
    2. Precautions
    1. Before assigning data, assign the Outgoing Route Selection Pattern Number (OPR) using the AOPR com-
    mand.
    2.Table 4-28 provides the applicable data assignment for each ISDN switch. 
    3. The data assignment of the INTF parameter of this command should correspond to the INT parameter of
    the ARTD command.
    4. The data assignment of the TON parameter of this command should correspond to the one assigned by the
    ARTI command.
    Table 4-28 Data Assignments for ISDN Switch
    ACBCAT&T NT
    Feature 
    AccessService Access
    (SDN)Service Access
    (MEGACOM, etc.)Public, etc. Public, etc.
    TDPTN 0 - 7 0 - 7 0 - 7 0 - 7 0 - 7
    OPR 0 - 4095 0 - 4095 0 - 4095 0 - 4095 0 - 4095
    RA 0 - 7 0 - 7 0 - 7 0 - 7 0 - 7
    MD 0 0 0 0 0
    TON 1 / 2 1 / 2 1 / 2 1 / 2 1 / 2
    INTF 5 5 5 7 7
    SERV 0 1 1 0 0
    CODE 0 / 5 / 6 1 2 / 3 / 5 / 6 0 / 1 / 2 / 4 / 5 / 8 3
    BAND - 0 - 9 -  -  0 - 9
    SCC 3 digits 3 digits - - - 
    						
    							CHAPTER 4 NDA-24298
    Page 832
    Issue 1
    ACBC : Assignment of Call by Call Service Data
    3. Data Entry Instructions
     ORDER OF 
         ROUTE
    ADVANCING
           (RA)
            0-7SERVICE
       MODE
        INTERFACE
          TYPE
          (INTF)
        1/5/7/10NUMBERING
          PLAN
    IDENTIFICA-
          TION
          (NPI)
           0-15TYPE OF
    NUMBER
       (TON)
         0-7FEATURE/
    SERVICE
    (SERV)
    0-2 FACILITY
     FAILURE
     (CODE)
        0-31        SCC
     DISTINGUISH
    NUMBER (SCC)
     MAX. 4 DIGITS
         TIME OF DAY
    CHANGE PATTERN
            (TDPTN)
                0-7    OUTGOING ROUTE
    SELECTION PATTERN
           NUMBER (OPR)
                  0-4095
    TDPTNOPR
    SCC
    NPI
    SERV
    TON
    CODE INTF RA
    Enter the route advancing order.
      1 = N-ISDN2
      5 = AT&T
      7 = Northern Telecom (NT)
    10 = Q-sig./IS11572The different range of data can be entered
    depending on the data of INTF/SERV
    parameter. See Table 4-20 CODE for applicable
    CODE data. 0 = Unknown
    1 = International
    2 = National
    3 = Not used
    4 = Local 
    5-7 = Not used TDPTN is specified by the ATCP commandOPR is specified by the AOPR command
    0 = Unknown
    1 = ISDN/Telephony Numbering Plan
    2-8 = Not used
    9 = Private Network Numbering Plan
    10-15 = Not used0 = Feature
    1 = Service
    2 = SET TON&NPI Enter SCC distinguish
    number.
    Always assigned as 0 for U.S.A.
    0 = Call by Call ServiceMD
     (MD)CODING
      VALUES
      
     WATS
     BAND
    NUMBER
     (BAND)
         0-9  
     LCR
    CHANGE
    PATTERN
    (PNL)
    1-999
                   BAND
    Enter WATS Band Number.
    PNL
    Enter the LCR Change Pattern within the range 
    from 1 to 999. This parameter is related to the 
    PNL data assigned by AOPR/AADC command. 
    						
    							NDA-24298 CHAPTER 4
    Page 833
    Issue 1
    ACBC : Assignment of Call by Call Service Data
    Table 4-29 Code
    WHEN APPLICABLE DATA AND MEANINGS
    INTF = 1 (N-ISDN2)17 = INWATS Selection 
    18 = OUTWATS 
    19 = Foreign Exchange (FX)
    20 = Tie Trunk (TIE)
    INTF = 5 (AT&T), 
    SERV = 0 (Feature)  0 = Transmit Network Selection 
      1 = CPN (SID) Preferred
      2 = BN (ANI) Preferred 
      3 = CPN (SID) Only
      4 = BN (ANI) Only 
      5 = Operator
      6 = PCCO
      9 = Call Associated TSC
    10 = Notification of Call Associated TSC Clearing or Resource Unavailable 
    INTF = 5 (AT&T), 
    SERV = 1 (Service)  1 = SDN (Including SDGN) 
      2 = MEGACOM 800 
      3 = MEGACOM
      5 = WATS maximal subscribe 9 band
      6 = ACCUNET
      7 = Long Distance Service
      8 = International 800 
    10 = AT&T Multi Quest
    INTF = 7
     (Northern Telecom (NT))0 = Public 
    1 = Private 
    2 = INWATS
    3 = OUTWATS
    4 = FX
    5 = Tie Trunk
    8 = TRD Call 
    						
    							CHAPTER 4 NDA-24298
    Page 834
    Issue 1
    ACBC : Assignment of Call by Call Service Data
    4. Data Sheet
    TIME OF DAY 
    CHANGE PATTERN
    (TDPTN)
    0-7OUTGOING ROUTE 
    SELECTION PATTERN 
    NUMBER 
    (OPR)
    0-4095
    ORDER OF 
    ROUTE 
    ADVANCING
    (RA)
    0-7SERVICE
     MODE
    (MD)INTERFACE 
    TYPE 
    (INTF)
    1/5/7/10NUMBERING 
    PLAN
     IDENTIFICATION
    (NPI)
    0-15TYPE OF 
    NUMBER
    (TON)
    0-7FEATURE/
    SERVICE 
    (SERV)
    0-2FAC I L I T Y  
    CODING 
    VALUES 
    FAILURE 
    (CODE)
    0-31WAT S  
    BAND 
    NUMBER
    (BAND)
    0-9SCC 
    DISTINGUISH 
    NUMBER 
    (SCC)
    MAX. 4 
    DIGITSLCR 
    CHANGE 
    PATTERN
    (PNL)
    1-999
    00
    10
    20
    30
    40
    50
    60
    70
    TIME OF DAY CHANGE 
    PAT T E R N
    (TDPTN)
    0-7OUTGOING ROUTE 
    SELECTION PATTERN 
    NUMBER 
    (OPR)
    0-4095
    ORDER OF 
    ROUTE 
    ADVANCING
    (RA)
    0-7SERVICE 
    MODE
    (MD)INTERFACE 
    TYPE 
    (INTF)
    1/5/7/10NUMBERING 
    PLAN 
    IDENTIFICATION 
    (NPI)
    0-15TYPE OF 
    NUMBER
    (TON)
    0-7FEATURE/
    SERVICE 
    (SERV)
    0-2FAC I L I T Y  
    CODING 
    VALUES 
    FAILURE
    (CODE)
    0-31WAT S  
    BAND 
    NUMBER
    (BAND)
    0-9SCC 
    DISTINGUISH 
    NUMBER 
    (SCC)
    MAX. 4 
    DIGITSLCR 
    CHANGE 
    PATTERN
    (PNL)
    1-999
    00
    10
    20
    30
    40
    50
    60
    70 
    						
    							NDA-24298 CHAPTER 4
    Page 835
    Issue 1
    AREF : Assignment of Reference Number Information Data
    AREF: Assignment of Reference Number Information Data
    1. General
    This command is used to assign Reference Number for ISDN feature.
    2. Precautions
    None
    3. Data Entry Instructions
    REMARKSREFERENCE NUMBER
    (REF)
    MAX.18 DIGITS [0-9, *, #]OUTSIDE
    ROUTE
    NUMBER
    (RT) 
            TRUNK
    NUMBER
    (TK)
    1-255
     
            
    REF
    Enter the specified Reference Number
    within 18 digits. 
    						
    							CHAPTER 4 NDA-24298
    Page 836
    Issue 1
    AREF : Assignment of Reference Number Information Data
    4. Data Sheet
    REFERENCE NUMBER
    (REF)
     MAX. 18  DIGITS [0-9, *, #]OUTSIDE
    ROUTE
    NUMBER
    (RT)TRUNK
    NUMBER
    (TK)
    1-255REMARKS 
    						
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Ipx Office Data Specification