Home > NEC > Communications System > NEC Neax 2400 Ipx Office Data Specification

NEC Neax 2400 Ipx Office Data Specification

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1020
    Add page 211 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 177
Issue 1
ASYDL : Assignment of System Data into Local DM (LDM)
1531SDT card accommodation
0/1 = Not accommodated/Accommodated
b1 
→ MG1, b3 → MG3, b5 → MG5, b7 → MG7
Note 1:The SDT card can be mounted in the odd MG
only.
532Fusion Point Code (FPC) of the Center Node (CN) for 
the Centralized Management Report-Fusion
533 00 Not used
534
b0
Stop Network Data Memory Broadcasting to LCNs 
from NCN
0/1 = No/Yes
Note:This bit stops the automatic broadcasting of
Network Data Memory from NCN while
network commands are being programmed.
This does not stop the NCN from verifying
data at the LCN, but stops the data
automatically downloading to the LCNs.
(For IPX-UMG system)
0 =
No Retry (no data retransmission) for data
copy error
1 =Retry in service (for dual LAN system)
b
1
0 = Data broadcasting at every NDM command
execution
1 = Broadcasting by CBCN command execution
Note 
b20 = Data Broadcasting via CMP
1 = Data Broadcasting via SPNote 
b3
0 = System Message unnecessary for error during
Periodic Refresh
1 = System message necessary for error during
Periodic RefreshNote 
b4System Message Output
0/1 = Out of service/In serviceNote 
b5
b6
b7
0 = NDM Data en bloc broadcasting (from NCN to 
All LNs)
1 = NDM Data individual broadcasting 
(from NDN to the LN)
535-575 00 Not used
Note:
This data is valid for IPX-UMG system.
SYSTEM
DATA
TYPE
(SYS)SYSTEM
DATA
INDEX
(INDEX)
512 - 1535DATA
(DATA)
00 - FF
(Hex)BIT 
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1BIT
    Add page 212 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 178
Issue 1
ASYDL : Assignment of System Data into Local DM (LDM)
1576
b0Fusion Centralized SMDR Service (Polling Method)
0/1 = No/Yes
b1
SMDR for Fusion Network station-to-station calls
0/1 = All Station Calls/Fusion Station Calls only
Note:Data valid only when ASYDL Index 512 is set.
Valid for IPX Version 2 software or higher.
b2
SMDR Interface Type
0/1 = RS232C/LANI
b3
Output the System Message related to connection 
down when the system changeover occurs on LAN 
Interface for SMDR.
0/1 = Invalid/Valid
b4 ~ b7Not used
577
b0~ b7
FPC (Fusion Point Code) of the Center node (CN) for 
the Centralized SMDR (Centralized Billing-Fusion). 
FPC: 1-253 (01 Hex-FD Hex.)
Note:Data 01 Hex-FD Hex  should be assigned at
the Local Node (LN) for the Centralized
Billing-Fusion. Data “00” must be fixedly
assigned at the Center Node (CN) of
Centralized Billing-Fusion.
578
b0
Centralized Billing-Fusion output text format of 
SMDR A
0/1 = ICS format/IPX format
b1 ~ b3Not used
b40/1 = SMDR A Apparatus with LAN interface is not
used/used. Note 
b5 ~ b7 Not used
579
b0
Centralized Billing-Fusion output text format of 
SMDR B
0/1 = ICS format/IPX format
b1 ~ b3Not used
b40/1= SMDR B Apparatus with LAN interface is not
used/used. Note 
b5 ~ b7Not used
Note:
Assign “1” at the node to which SMDR with LAN interface is connected. If not connected, this data setting
is fixed to “0.”
SYSTEM
DATA
TYPE
(SYS)SYSTEM
DATA
INDEX
(INDEX)
512 - 1535DATA
(DATA)
00 - FF
(Hex)BIT 
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1BIT
    Add page 213 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 179
Issue 1
ASYDL : Assignment of System Data into Local DM (LDM)
1580
b0
Centralized Billing-Fusion output text format of 
SMDR C
0/1 = IMS (ICS) format/IPX format
b1 ~ b3Not used
b40/1 = SMDR C Apparatus with LAN interface is not 
used/used. Note 
b5 ~ b7Not used
581
b0
Centralized Billing-Fusion output text format of 
SMDR D
0/1 = ICS format/IPX format
b1 ~ b3Not used
b40/1 = SMDR D Apparatus with LAN interface is 
not used/used. Note 
b5 ~ b7Not used
582
b0 ~ b3
The number of the node to be polled in a polling
0000 = 1 0001 = 1 0010 = 2 0011 = 3
0100 = 4 0101 = 5 0110 = 6 0111 = 7
1000 = 8 ~ 1111 = 8
Note 1:For numbers more than 8, assign the data
value as 8.
b4 ~ b7Not used
583
b0 ~ b2
The timing for transmitting the billing data of SMDR-
Netfusing from the node that accommodates the 
outgoing trunk to the node that accommodates the 
called station.
b2b1b0b2b1b0
0 0 0 = 8 sec. 1 0 0 = 8 sec.
0 0 1 = 2 sec. 1 0 1 = 10 sec.
0 1 0 = 4 sec. 1 1 0 = 12 sec.
0 1 1 = 6 sec. 1 1 1 = 14 sec.
b3 ~ b6Not used
b7
The timing for transmitting the polled billing data 
assigned at 
b0 ~ b2 is 
0= In Service
Note:
Assign “1” at the node to which SMDR with LAN interface is connected. If not connected, this data setting
is fixed to “0”.
SYSTEM
DATA
TYPE
(SYS)SYSTEM
DATA
INDEX
(INDEX)
512 - 1535DATA
(DATA)
00 - FF
(Hex)BIT 
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1BIT
    Add page 214 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 180
Issue 1
ASYDL : Assignment of System Data into Local DM (LDM)
1584
b0 ~ b7
Designate the Polling cycle within the Self Node (for IPX-
UMG system only) by the number of calls intended for Poll-
ing of the system. Assign this data to default value “0” or “8” 
in case the number of calls is within 675,000 calls per a day. 
Actual setting is measured declining 30% of calls in the fol-
lowing values on the list:
585b0 ~ b7
Designate the Polling cycle between the Nodes (for Center 
Node only). When a LN among multiple LNs is set as the 
Center Node of CCIS Centralized Billing, Polling cycle is to 
be changed to prevent from Buffer Overflow in LNs. Usual-
ly assign the default value “0 (2 seconds cycle)”
.
586
b0 ~ b7
Set the upper limit of polling buffer rate (01%-99%) 
at Centralized Billing Node.
Example:
Note:If the value exceeds the assigned limit,
polling is not activated. In case 00Hex is
assigned to b0 ~ b7, the data is to be
assigned to the standard rate 50%.
587-607 Not used
SYSTEM
DATA
TYPE
(SYS)SYSTEM
DATA
INDEX
(INDEX)
512 - 1535DATA
(DATA)
00 - FF
(Hex)BIT 
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1BIT
Call/day System Data
~5,400,000 1
~2,700,000 2
~1,800,000 3
~1,350,000 4
~1,080,000 5
~900,000 6
~770,000 7
~675,000 8
Call/day System Data
~600,000 9
~540,000 10
~490,000 11
~450,000 12
~400,000 13
~385,000 14
~360,000 15
~337,000 16
Polling Cycle System Data
0.25s 1
0.50s 2
0.75s 3
1.00s 4
1.25s 5
1.50s 6
1.75s 7
2.00s 8
Polling Cycle System Data
2.25s 9
2.50s 10
2.75s 11
3.00s 12
3.25s 13
3.50s 14
3.75s 15
4.00s 16
b7b6b5b4b3b2b1b0
Unit
Te n s
80 10 000 000 b
7b6b5b4b3b2b1b0
    Add page 215 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 181
Issue 1
ASYDL : Assignment of System Data into Local DM (LDM)
1608 The Fusion Point Code (FPC) of the polling destination.
FPCs range from 1 to 253 as shown in the table below. Assign data “1 (Polling 
destination of Centralized Billing-Fusion)” for the corresponding FPC node.
Note:This data should be assigned at the Center node for the Centralized
Billing-Fusion. 609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
SYSTEM
DATA
TYPE
(SYS)SYSTEM
DATA
INDEX
(INDEX)
512 - 1535DATA
(DATA)
00 - FF
(Hex)BIT 
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1BIT
INDEXb7b6b5b4b3b2b1b0
608 7654321 -
609 151413121110 9 8
610 2322212019181716
611 3130292827262524
612 3938373635343332
613 4746454443424140
614 5554535251504948
615 6362616059585756
616 7170696867666564
617 7978777675747372
618 8786858483828180
619 9594939291908988
620 103 102 101 100 99 98 97 96
621 111 110 109 108 107 106 105 104
622 119 118 117 116 115 114 113 112
623 127 126 125 124 123 122 121 120
624 135 134 133 132 131 130 129 128
625 143 142 141 140 139 138 137 136
626 151 150 149 148 147 146 145 144
627 159 158 157 156 155 154 153 152
628 167 166 165 164 163 162 161 160
629 175 174 173 172 171 170 169 168
630 183 182 181 180 179 178 177 176
631 191 190 189 188 187 186 185 184
632 199 198 197 196 195 194 193 192
633 207 206 205 204 203 202 201 200
634 215 214 213 212 211 210 209 208
635 223 222 221 220 219 218 217 216
636 231 230 229 228 227 226 225 224
637 239 238 237 236 235 234 233 232
638 247 246 245 244 243 242 241 240
639 - - 253 252 251 250 249 248
    Add page 216 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 182
Issue 1
ASYDL : Assignment of System Data into Local DM (LDM)
1640
b0Fusion Point Code (FPC) of the node providing ATT-
CON.
Assign FPC of a terminating node for operator calls 
from other nodes and Ring Down (IC) calls from 
PSTN.
FPC: 1-253 (01 Hex-FD Hex)
Note:This data is necessary at all nodes. Assign
the self FPC at the terminating node.b1
b2
b3
b4
b5
b6
b7
641
b0
Designation of output numbers for SMDR ICS 
format.
0/1 = Physical (station) number/Telephone number
Note:This data is valid when the text format of
SMDR is “ICS format,” and the number of
digits for Telephone number is 6 or less.
b1
Designation of output numbers for MCI ICS format.
0/1=Physical (station) number/Telephone number
Note:This data is valid when the text format of
MCI is “ICS format,” and the number of
digits for Telephone number is 6 or less.
0
b2Not used
b3
Designation of output routes for SMDR ICS format.
0/1 = Physical route/Logical route
Note:This data is valid when the text format of
SMDR is “ICS format.”
0
b4~b7Not used
SYSTEM
DATA
TYPE
(SYS)SYSTEM
DATA
INDEX
(INDEX)
512 - 1535DATA
(DATA)
00 - FF
(Hex)BIT 
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1BIT
    Add page 217 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 183
Issue 1
ASYDL : Assignment of System Data into Local DM (LDM)
1642 Speech Path Memory of TONE ROM source selection for Voice Prompt 
Service.
0/1 = TONE ROM/Speech Path Memory 643
644
645
646 Speech Path Memory of MUSIC ROM source selections for Voice Prompt 
Service.
0/1 = MUSIC ROM/Speech Path Memory 647
648
649
650~671 Not used
672
b0
Telephone number display location on Dterm
Note:See the example on the next page.
b1
Not used
b2
b3
b4
b5
b6
b7
673 - 703 Not used
SYSTEM
DATA
TYPE
(SYS)SYSTEM
DATA
INDEX
(INDEX)
512 - 1535DATA
(DATA)
00 - FF
(Hex)BIT 
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1BIT
INDEXb7b6b5b4b3b2b1b0
642 ch7 ch6 ch5 ch4 ch3 ch2 ch1 ch0
643 ch15 ch14 ch13 ch12 ch11 ch10 ch9 ch8
644 ch23 ch22 ch21 ch20 ch19 ch18 ch17 ch16
645 ch31 ch30 ch29 ch28 ch27 ch26 ch25 ch24
INDEXb7b6b5b4b3b2b1b0
646 ch7 ch6 ch5 ch4 ch3 ch2 ch1 ch0
647 ch15 ch14 ch13 ch12 ch11 ch10 ch9 ch8
648 ch23 ch22 ch21 ch20 ch19 ch18 ch17 ch16
649
ch29 ch28 ch27 ch26 ch25 ch24
    Add page 218 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 184
Issue 1
ASYDL : Assignment of System Data into Local DM (LDM)
Example:
When a call terminates on a Dterm from Telephone number 123456789, the Dterm displays as follows 
depending on the data settings.
23456789
11:20           AM           WED           16           APR           1997
 MIC             DND                                                             >>>
123456789
MIC            DND                                                             >>> ASYDL SYS1,INDEX672,Bit0=0
8 digits long maximum when Telephone
Number is displayed on top line.
ASYDL SYS1,INDEX672,Bit0=1
    Add page 219 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 185
Issue 1
ASYDL : Assignment of System Data into Local DM (LDM)
SYSTEM
DATA
TYPE
(SYS)SYSTEM
DATA
INDEX
(INDEX)
512 - 1535DATA
(DATA)
00 - FF
(Hex)BIT
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1BIT
1704 Fusion Point Code (FPC) of the node to which ATT-CON transfers the Day/
Night changeover information.
FPCs range from 1 to 253 as shown in the table below. Assign data “1 (D/N 
changeover information is transferred)” for the corresponding node.
Note:This data is necessary at the node providing ATT-CON. 705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736 - 799 Not used
INDEXb7b6b5b4b3b2b1b0
704 76543210
705 151413121110 9 8
706 2322212019181716
707 3130292827262524
708 3938373635343332
709 4746454443424140
710 5554535251504948
711 6362616059585756
712 7170696867666564
713 7978777675747372
714 8786858483828180
715 9594939291908988
716 103 102 101 100 99 98 97 96
717 111 110 109 108 107 106 105 104
718 119 118 117 116 115 114 113 112
719 127 126 125 124 123 122 121 120
720 135 134 133 132 131 130 129 128
721 143 142 141 140 139 138 137 136
722 151 150 149 148 147 146 145 144
723 159 158 157 156 155 154 153 152
724 167 166 165 164 163 162 161 160
725 175 174 173 172 171 170 169 168
726 183 182 181 180 179 178 177 176
727 191 190 189 188 187 186 185 184
728 199 198 197 196 195 194 193 192
729 207 206 205 204 203 202 201 200
730 215 214 213 212 211 210 209 208
731 223 222 221 220 219 218 217 216
732 231 230 229 228 227 226 225 224
733 239 238 237 236 235 234 233 232
734 247 246 245 244 243 242 241 240
735 - - 253 252 251 250 249 248
    Add page 220 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 186
Issue 1
ASYDL : Assignment of System Data into Local DM (LDM)
1800
b0
ALGNL/ALGSL command tenant User Group Number 
(UGN) table development of Local Data Memory 
(LDM)
0/1 = Separate/Common
b1
ASPAL command tenant table development of Local 
Data Memory (LDM)
0/1 = Separate/Common
b2
ANPDL command tenant data table development of 
Local Data Memory (LDM)
0/1 = Separate/Common
b3
APCNL command tenant data table development of 
Local Data Memory (LDM)
0/1 = Separate/Common
b4
AFRSL, ASTPL, AUNEL command tenant data table 
development of Local Data Memory (LDM)
0/1 = Separate/Common
b5
ASTPL command tenant data table development of 
Local Data Memory (LDM)
0/1 = Separate/Common
b6Not used
b7
AAEDL command tenant data table development of 
Local Data Memory (LDM)
0/1 = Separate/Common
801-802 00Not used
803
b0Not used
b1Consultation Hold Release
0/1 = Out of service/In service
b2
Operation from the stations in Add On Conference - 8 
Party Service
0/1 = Operation is invalid/Valid
b3 - b7Not used
804
b0
Kind of tone when a call is transferred from Attendant 
Console in case all the stations in a UCD group are busy;
0/1 = BT/RBT
b1Transferring the busy information of Logical Route
0/1 = Out of service/In service
b2Not used
b3The number of digit for Internal Zone Paging group ID
0/1 = 2 digits/3 digits
b4
UCD Announcement Information 
0 = Individual setting for each UCD group
1 = Common in all the UCD groups
0b5 ~ b7Not used
SYSTEM
DATA
TYPE
(SYS)SYSTEM
DATA
INDEX
(INDEX)
512 - 1535DATA
(DATA)
00 - FF
(Hex)BIT
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1BIT
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Ipx Office Data Specification