NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 757 Issue 1 ACSA : Assignment of Connection Service Index A 4. Data Sheet ROUTE NUMBER (RT)TRUNK NUMBER (TK)CONNECTION SERVICE INDEX A (CSIA) 1 – 7TERMINATING STATION ABBREVIATED DIGIT CODE (ADC) 4 DIGITS TENANT NUMBER (TN)STATION NUMBER (STN) MAX. 6 DIGITS
CHAPTER 4 NDA-24298 Page 758 Issue 1 ACSAL : Assignment of Connection Service Index A for LDM ACSAL: Assignment of Connection Service Index A for LDM 1. General This command assigns the call termination for CAS Line and Direct-in Termination (Day Only) for the Local Node (LN) in Fusion network. 2. Precautions 1. The ACFR command assignment is also required to assign the trunk incoming call termination service feature. 2. CAS data at the Satellite Station (a) It is necessary to set the TEC (Telephone Class) of the CAS Line to “15” in the ASDT command. (b) A ring-down incoming call from a C.O line is terminated to the CAS Line. 3. When assigning CSIA = 3 (Direct-in Termination-outside (Day Only)), the ADC should be assigned by the ASPD command. 4. Use the ACSIL command instead of this command if Direct-in Termination (Day and Night Mode) or Direct-in Termination (Night Mode) is required. 3. Data Entry Instructions LOGICAL ROUTE NUMBER (LGRT)TRUNK NUMBER (TK)CONNECTION SERVICE INDEX A (CSIA) 1-7T E R M I N AT I N G S TAT I O NABBREVIATED DIGIT CODE (ADC) MAX. 4 DIGITS USER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN) 1 0 0 1 1 or 2 1 2 3 0 0 1 1 CSIA 1 = CAS Line 2 = Direct-In Termination (Day only) 3 = Direct-In Termination-Outside (Day only) 4-7 = Not used UGN Fixed to “1.”ADC Enter the abbreviated digits assigned by the ASPD command.
NDA-24298 CHAPTER 4 Page 759 Issue 1 ACSAL : Assignment of Connection Service Index A for LDM 4. Data Sheet LOGICAL ROUTE NUMBER (LGRT)TRUNK NUMBER (TK)CONNECTION SERVICE INDEX A (CSIA) 1 – 7TERMINATING STATION ABBREVIATED DIGIT CODE (ADC) 4 DIGITS USER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN) MAX. 16 DIGITS 1
CHAPTER 4 NDA-24298 Page 760 Issue 1 ACSI : Assignment of Connection Service Index Data ACSI: Assignment of Connection Service Index Data 1. General This command assigns the call termination for Direct-in Termination (Day and Night), Night Connection and Remote Access to System. 2. Precautions 1. The ACFR command assignment is also required to assign the trunk incoming call termination service feature. 2. When setting the CSI to “6” (Night Connection-Outside) or “7” (Direct-in Termination-Outside) using this command, the ADC must be set by the ASPD command. 3. Use the ACSA command instead of this command if Direct-in Termination (Day mode only) is required. 4. When the “PFT control by the external key” is required, the following data assignments are needed: (a) AUNT command, TYPE=2 (PFT) (b) AEKD command (c) ANCD command (d) ACSI command, CSI=4 (Direct-in Termination (Night Mode)) 5. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. Enter the TN in which this command effects.
NDA-24298 CHAPTER 4 Page 761 Issue 1 ACSI : Assignment of Connection Service Index Data 3. Data Entry Instructions ROUTE NUMBER (RT)CONNECTION SERVICE INDEX (CSI) 1-7 TRUNK NUMBER (TN)TENANT NUMBER (TN)STATION NUMBER (STN)ABBREVIATED DIGIT CODE (ADC) 4 DIGITS TERMINATING STATION CSIA 1 = Not used 2 = Not used 3 = Direct-In Termination (Day and Night Mode) 4 = Direct-In Termination (Night Mode) 5 = Remote Access to PBX 6 = Night Connection - Outside 7 = Direct-In Termination - Outside (Day and Night Mode) 6 0 0 1 3 or 4 0 1 3 1 1 3 20015 2 0 0 1 6 or 7 0 0 1 1 ADC The dialed number corresponds to the ADC and is assigned by the ASPD command.
CHAPTER 4 NDA-24298 Page 762 Issue 1 ACSI : Assignment of Connection Service Index Data 4. Data Sheet ROUTE NUMBER (RT)TRUNK NUMBER (TK)CONNECTION SERVICE INDEX (CSI) 1 – 7TERMINATING STATION ABBREVIATED DIGIT CODE (ADC) 4 DIGITS TENANT NUMBER (TN)STATION NUMBER (STN)
NDA-24298 CHAPTER 4 Page 763 Issue 1 ACSIL : Assignment of Connection Service Index Data for LDM ACSIL: Assignment of Connection Service Index Data for LDM 1. General This command assigns the call termination for Direct-in Termination (Day and Night), Night Connection and Remote Access to System for the Local Node (LN) in Fusion network. 2. Precautions 1. The ACFR command assignment is also required to assign the trunk incoming call termination service feature. 2. When setting the CSI to “6” (Night Connection-Outside) or “7” (Direct-in Termination-Outside) using this command, the ADC must be set by the ASPD command. 3. Use the ACSAL command instead of this command if Direct-in Termination (Day mode only) is required. 4. When the “PFT control by the external key” is required, the following data assignments are needed: (a) AUNT command, TYPE = 2 (PFT) (b) AEKD command (c) ANCD command (d) ACSIL command, CSI = 4 (Direct-in Termination (Night Mode))
CHAPTER 4 NDA-24298 Page 764 Issue 1 ACSIL : Assignment of Connection Service Index Data for LDM 3. Data Entry Instructions LOGICAL ROUTE NUMBER (LGRT)CONNECTION SERVICE INDEX (CSI) 1-7 TRUNK NUMBER (TK)USER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN)ABBREVIATED DIGIT CODE (ADC) 4 DIGITS TERMINATING STATION CSI 1 = Not used 2 = Not used 3 = Direct-In Termination (Day and Night Mode) 4 = Direct-In Termination (Night Mode) 5 = Remote Access to PBX 6 = Night Connection-Outside 7 = Direct-In Termination-Outside (Day and Night Mode) 6 0 0 1 3 or 4 0 1 3 1 1 3 20015 2 0 0 1 6 or 7 0 0 1 1 ADC The dialed number corresponds to the ADC assigned by the ASPD command. NND Enter the number of digit of the station applying to the first digit. NUMBER OF NECESSARY DIGIT (NND)
NDA-24298 CHAPTER 4 Page 765 Issue 1 ACSIL : Assignment of Connection Service Index Data for LDM 4. Data Sheet LOGICAL ROUTE NUMBER (LGRT)TRUNK NUMBER (TK)CONNECTION SERVICE INDEX (CSI) 1 – 7TERMINATING STATION ABBREVIATED DIGIT CODE (ADC) 4 DIGITSNUMBER OF NECESSARY DIGIT (NND) TENANT NUMBER (TN)TELEPHONE NUMBER (TELN)
CHAPTER 4 NDA-24298 Page 766 Issue 1 ANCD : Assignment of Night Connection Data ANCD: Assignment of Night Connection Data 1. General This command is used when the Power Failure Transfer (PFT) circuit card is controlled by the external key. 2. Precautions 1. When the “PFT control by the external key” is required, the following data assignments are needed: (a) AUNT command, TYPE = 2 (PFT) (b) AEKD command (c) ANCD command (d) ACSI command, CSI = 4 (Direct-in Termination (Night Mode)) 3. Data Entry Instructions MODULE GROUP (MG) 00-31PORT NUMBER OF PFT CARD (PORT) 0-11 PFT CARD NUMBER (NCU PKG) 0-3ROUTE NUMBER (RT) 1-255REMARKS TRUNK NUMBER (TK) MG/NCU/PKG Enter the data assigned by the AUNT command.PORT The port parameter corresponds to the circuit number of the PFT card. RT/TK Enter the trunk route number (RT) and the trunk number (TK) connected to the corresponding circuit number of PFT card.