NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4
Page 817
Issue 1
ACNDN : Assignment of Calling Number Data for NDM
ACNDN: Assignment of Calling Number Data for NDM
1. General
This command assigns the Station Number Identification (SID) sent to the ISDN for the SID To Network -
Present service/for the Calling Party Recognition service. The data assigned by this command is written in
Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node
(LN).
2. Precautions
1. The CNP parameter in this command corresponds to the one assigned by the ACNPN command.
2. Do not assign the data “0” to both SKIP and ADD parameters.
3. For DC parameter, assign the same number of digits designated at ADD parameter.
4. This command must be used in a pair with ACNPN command.
3. Data Entry Instructions
CALLING
NUMBER
PATTERN
(CNP)
0-1023NUMBER OF DIGITS OF
THE ADDITIONAL
NUMBER
(ADD)
0-24SKIP DIGIT
(SKIP)
0-24REMARKS
SKIP
The number of skip digits from the SID.CNP
0 = OG ID Service
1-1023 = Calling Number PatternADD
The number of the digits for the
additional number.
DIGIT CODE OF
THE ADDITIONAL
NUMBER
(DC)
MAX.24 DIGITS
DC
The SID sent to the ISDN
CHAPTER 4 NDA-24298 Page 818 Issue 1 ACNDN : Assignment of Calling Number Data for NDM 4. Data Sheet CALLING NUMBER PATTERN (CNP) 0 - 1023SKIP DIGIT (SKIP) 0 - 24NUMBER OF DIGITS OF THE ADDITIONAL NUMBER (ADD) 0 - 24DIGIT CODE OF THE ADDITIONAL NUMBER (DC) MAX. 24 DIGITSREMARKS
NDA-24298 CHAPTER 4 Page 819 Issue 1 ACPNCL : Assignment of Calling Party Number Conversion for LDM ACPNCL: Assignment of Calling Party Number Conversion for LDM 1. General This command assigns skip and additional digits information for Outgoing Route Number. This data is written in Local Data Memory (LDM). 2. Precautions 1. When the calling party number that is more than 8 digits including the office code (ARNP, RT=0) is received from CCIS line, the calling party number is sent as Physical Station Number through CCIS line. Therefore, Physical Station Number must be assigned in RCPN parameter to recognize the calling party number. 3. Data Entry Instruction OUTGOING ROUTE NUMBER (OGRT) 1-255NUMBER OF DIGIT TO BE SKIPPED (SKIP) 0-24NUMBER OF ADDITIONAL DIGIT CODE (ADD) 0-24 RECEIVED CALLING PARTY NUMBER (RCPN) Max. 24 digitsCALLING PARTY NUMBER TO BE ADDED (ACPN) Max. 24 digits REMARKS RCPN Determine the number to be recognized in the received calling party number. ACPN Enter desired additional numbers to the received calling party number within 24 digits.SKIP Enter desired number of digit to be skipped from the received calling party number. ADD Enter the number of digit to be entered in ACPN parameter.
CHAPTER 4 NDA-24298 Page 820 Issue 1 ACPNCL : Assignment of Calling Party Number Conversion for LDM 4. Data Sheet OUTGOING ROUTE NUMBER (OGRT) 1-255RECEIVED CALLING PARTY NUMBER (RCPN) Max. 24 digitsNUMBER OF DIGIT TO BE SKIPPED (SKIP) 0-24NUMBER OF ADDITIONAL DIGIT CODE (ADD) 0-24CALLING PARTY NUMBER TO BE ADDED (ACPN) Max. 24 digitsREMARKS
NDA-24298 CHAPTER 4 Page 821 Issue 1 ACPNCN : Assignment of Calling Party Number Conversion for NDM ACPNCN: Assignment of Calling Party Number Conversion for NDM 1. General This command assigns skip and additional digits information for Outgoing Logical Route Number. The data assigned by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN). 2. Precautions 1. When the calling party number that is more than 8 digits including the office code (ARNP, RT=0) is received from CCIS line, the calling party number is sent as Physical Station Number through CCIS line. Therefore, Physical Station Number must be assigned in RCPN parameter to recognize the calling party number. 2. When the system is upgraded from non-fusion system to fusion system, Physical Station Number/ Telephone Number written in LDM programmed in ACPNCL command should be deleted and the new Telephone Number must be assigned using ACPNCN command unless those numbers are identical with Telephone Numbers to be written NDM (If the numbers are not deleted, the system detects the wrong number data or does not detect the number data since the fusion system reads out the NDM data). 3. Data Entry Instruction OUTGOING LOGICAL ROUTE NUMBER (OGLGRT) 1-899NUMBER OF DIGIT TO BE SKIPPED (SKIP) 0-24NUMBER OF ADDITIONAL DIGIT CODE (ADD) 0-24 RECEIVED CALLING PARTY NUMBER (RCPN) Max. 24 digitsCALLING PARTY NUMBER TO BE ADDED (ACPN) Max. 24 digits REMARKS RCPN Determine the number to be recognized in the received calling party number. ACPN Enter desired additional numbers to the received calling party number within 24 digits.SKIP Enter desired number of digit to be skipped from the received calling party number. ADD Enter the number of digit to be entered in ACPN parameter.
CHAPTER 4 NDA-24298 Page 822 Issue 1 ACPNCN : Assignment of Calling Party Number Conversion for NDM 4. Data Sheet OUTGOING LOGICAL ROUTE NUMBER (OGRT) 1-899RECEIVED CALLING PARTY NUMBER (RCPN) Max. 24 digitsNUMBER OF DIGIT TO BE SKIPPED (SKIP) 0-24NUMBER OF ADDITIONAL DIGIT CODE (ADD) 0-24CALLING PARTY NUMBER TO BE ADDED (ACPN) Max. 24 digitsREMARKS
NDA-24298 CHAPTER 4 Page 823 Issue 1 AFCP : Assignment of Call Forwarding Service by Calling Number AFCP: Assignment of Call Forwarding Service by Calling Number 1. General This command assigns the data related to the Calling Party Recognition Service of ISDN. 2. Precautions 1. When the Calling Forwarding Destination is a trunk line, assign the Abbreviated Digit Code for the trunk line using the ASPD command. 2. Data can be entered on a Day/Night basis if specified in the ASYD command, SYS 1, INDEX 76, Bit 2=1. 3. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. 4. The CALLING PARTY parameter may be treated as: (a) All digits (Called Station Number + Access code assigned by the DC parameter of the ACND command + Calling party number) (b) Some portions are ignored: Example:Ignore 003, where 003 is the access code. (c) The entire number is ignored, reverting back to traditional Call Forwarding services. 5. The Calling Party Recognition Service affects when the Bearer Capability of the calling party is “Speech” or “3.1 kHz audio.” (“Unrestricted digital data” is not available.)
CHAPTER 4 NDA-24298
Page 824
Issue 1
AFCP : Assignment of Call Forwarding Service by Calling Number
3. Data Entry Instructions
INFORMATION
TRANSFER
(ITC)
0-2 CALLING
PARTY
NUMBER
(CALLING PARTY)
MAX. 32 DIGITSCALL FORWARDING
DESTINATION
(CFD)
0-3 DAY/NIGHT
MODE
(DAY/NIGHT)
D/NTENANT
NUMBER
(TN) CALL
FORWARDING
SERVICE
FUTURE
(CFSI)
0-2STATION
NUMBER
(STN)ABBREVIATED
DIGIT CODE
(ADC)
1
135119212661234
100
1
23611
000
DAY/NIGHTCFSIITC
CALLING PARTYCFD
STN
ADC D = DAY
N = NIGHT0 = Call Forwarding-All Calls
1 = Call Forwarding-Busy Line
2 = Call Forwarding-Dont Answer
3 = Direct-In Termination0 = Speech
1 = Unrestricted (Digital Data)
2 = Audio (MODEM)
Called Station Number + ACC (Note) + Calling Party Number
Note: Enter the Access Code assigned in the ACND command.0 = Station
1 = ATT
2 = External
3 = Not used.
STN parameter appears when CFD = 0 (Station)
ADC parameter appears when CFD = 2 (External)
NDA-24298 CHAPTER 4 Page 825 Issue 1 AFCP : Assignment of Call Forwarding Service by Calling Number 4. Data Sheet (a) Call Forwarding Destination is a station. (b) Call Forwarding Destination is an ATTCON. DAY/NIGHT MODE (DAY/NIGHT) D/NTENANT NUMBER (TN)CALLING PARTY NUMBER (CALLING PARTY) MAX. 32 DIGITSCALL FORWARDING SERVICE FUTURE (CFSI) 0-3INFORMATION TRANSFER (ITC) 0-2CALL FORWARDING DESTINATION (CFD) 0STATION NUMBER (STN) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DAY/ NI GH T MODE (DAY/NIGHT) D/NTENANT NUMBER (TN)CALLING PARTY NUMBER (CALLING PARTY) MAX. 32 DIGITSCALL FORWARDING SERVICE FUTURE (CFSI) 0-3INFORMATION TRANSFER (ITC) 0-2CALL FORWARDING DESTINATION (CFD) 1 1 1 1 1 1 1 1 1 1 1 1
CHAPTER 4 NDA-24298 Page 826 Issue 1 AFCP : Assignment of Call Forwarding Service by Calling Number (c) Call Forwarding Destination is a C.O. Line. DAY/ NIGHT MODE (DAY/ NIGHT) D/NTENANT NUMBER (TN)CALLING PA R T Y NUMBER (CALLING PARTY) MAX. 32 DIGITSCALL FORWARDING SERVICE FUTURE (CFSI) 0-3INFORMATION TRANSFER (ITC) 0-2CALL FORWARDING DESTINATION (CFD) 2ABBREVIATE DIGIT CODE (ADC) MAX. 4 DIGITS 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2