NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 347 Issue 1 ALDNN : Assignment of Listed Directory Number for NDM ALDNN: Assignment of Listed Directory Number for NDM 1. General This command is used to assign the Listed Directory Number (LDN) which allows a Direct Inward Dialing (DID) call to terminate to Attendant Consoles within the Fusion Network. The data assigned by this command is written in Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN). 2. Precautions 1. When the LDN number assigned by this command is dialed from PSTN, the call terminates to Attendant Consoles during the Day mode, and redirects to a station or outside party in the Night mode. Any ATTCON or station within the Fusion Network can be designated as the destination the call to be terminated. 2. The numbering of the LDN assigned by this command must conform to the numbering plan data. (The ANPDN command and the ASPAN command (SRV = TELN)) 3. This command is an available software enhancement. 3. Data Entry Instructions (a) TYPE = 0 (No Night Transfer) is selected; 0 = No Night Transfer 1 = TELN 2 = To Outside 3 = ADC Enter desired DID number to terminate the call to Attendant Console in Day mode. USER GROUP NUMBER OF LDN (L-UGN)FUSION POINT CODE (FPC) 1-253TENANT NUMBER (TN) TELEPHONE NUMBER OF LISTED DIRECTORY NUMBER (L-TELN) MAX. 16 DIGITS L-TELN Enter the FPC of the Node accommodating the Attendant Console to which DID call to be terminated.FPCTYPE TYPEREMARKS 0
CHAPTER 4 NDA-24298 Page 348 Issue 1 ALDNN : Assignment of Listed Directory Number for NDM (b) TYPE = 1 (TELN) is selected; (c) TYPE = 2 (To Outside) is selected; 0 = No Night Transfer 1 = TELN 2 = To Outside 3 = ADC Enter desired DID number to terminate the call to Attendant Console in Day mode. USER GROUP NUMBER OF LDN (L-UGN)FUSION POINT CODE (FPC) 1-253TENANT NUMBER (TN) TELEPHONE NUMBER OF LISTED DIRECTORY NUMBER (L-TELN) MAX. 16 DIGITS L-TELN Enter the FPC of the Node accommodating the Attendant Console to which DID call to be terminated.FPCTYPE TYPETELEPHONE NUMBER (TELN) MAX. 16 DIGITS Enter the Telephone Number of the destination station to which the call to be transferred during Night mode. (Specific ATTCON Number assigned by the ASATN command cannot be set.)TELN 1 0 = No Night Transfer 1 = TELN 2 = To Outside 3 = ADC Enter desired DID number to terminate the call to Attendant Console in Day mode. USER GROUP NUMBER OF LDN (L-UGN)FUSION POINT CODE (FPC) 1-253 TELEPHONE NUMBER OF LISTED DIRECTORY NUMBER (L-TELN) MAX. 16 DIGITS L-TELN Enter the FPC of the Node accommodating the Attendant Console to which DID call to be terminated.FPCTYPE TYPETELEPHONE NUMBER (DC) MAX. 16 DIGITS Enter the outside party number to which the DID call to be transferred during Night mode.DC 2 TENANT NUMBER (TN)
NDA-24298 CHAPTER 4 Page 349 Issue 1 ALDNN : Assignment of Listed Directory Number for NDM (d) TYPE = 3 (ADC) is selected; 0 = No Night Transfer 1 = TELN 2 = To Outside 3 = ADC Enter desired DID number to terminate the call to Attendant Console in Day mode. USER GROUP NUMBER OF LDN (L-UGN)FUSION POINT CODE (FPC) 1-253TENANT NUMBER (TN) TELEPHONE NUMBER OF LISTED DIRECTORY NUMBER (L-TELN) MAX. 16 DIGITS L-TELN Enter the FPC of the Node accommodating the Attendant Console to which DID call to be terminated.FPCTYPE TYPE REMARKSABBREVIATED DIGIT CODE (ADC) 4 DIGITS Enter the Abbreviated Digit Code assigned by the ASPD command.ADC 3
CHAPTER 4 NDA-24298 Page 350 Issue 1 ALDNN : Assignment of Listed Directory Number for NDM 4. Data Sheet (a) TYPE = 0 (No Night Transfer) is selected; (b) TYPE = 1 (TELN) is selected; USER GROUP NUMBER OF LDN (L-UGN)TELEPHONE NUMBER OF LISTED DIRECTORY NUMBER (L-TELN) MAX. 16 DIGITSFUSION POINT CODE (FPC) 1-253TENANT NUMBER (TN) TYPE REMARKS USER GROUP NUMBER OF LDN (L-UGN)TELEPHONE NUMBER OF LISTED DIRECTORY NUMBER (L-TELN) MAX. 16 DIGITSFUSION POINT CODE (FPC) 1-253TENANT NUMBER (TN) TYPETELEPHONE NUMBER (TELN) MAX. 16 DIGITS
NDA-24298 CHAPTER 4 Page 351 Issue 1 ALDNN : Assignment of Listed Directory Number for NDM (c) TYPE = 2 (To Outside) is selected; (d) TYPE = 3 (ADC) is selected; USER GROUP NUMBER OF LDN (L-UGN)TELEPHONE NUMBER OF LISTED DIRECTORY NUMBER (L-TELN) MAX. 16 DIGITSFUSION POINT CODE (FPC) 1-253TENANT NUMBER (TN) TYPEDESTINATION NUMBER (DC) MAX. 16 DIGITS USER GROUP NUMBER OF LDN (L-UGN)TELEPHONE NUMBER OF LISTED DIRECTORY NUMBER (L-TELN) MAX. 16 DIGITSFUSION POINT CODE (FPC) 1-253TENANT NUMBER (TN) TYPEABBREVIATED DIGIT CODE (ADC) 4 DIGITSREMARKS
CHAPTER 4 NDA-24298 Page 352 Issue 1 AISP : Assignment of Incoming Selection Pattern AISP: Assignment of Incoming Selection Pattern 1. General This command assigns additional digits information with respect to the Incoming Selection Translation Pattern Number (PNI). 2. Precautions 1. Since the PNI is an intermediate parameter to the ASTP command, assign the PNI for the incoming route number by the ASTP command before assigning the AISP command. 2. The system processes the ASTP/AISP command prior to the numbering plan data. If the LCR access code is added to the received numbers by the ASTP/AISP command, the system processes the LCR related command such as ASPA/AFRS/AOPR. 3. Data Entry Instructions Enter the PNI assigned by the ASTP command. 1PNI INCOMING SELECTION TRANSLATION PATTERN NUMBER (PNI) 1-15ADDITIONAL DIGIT INFORMATION (DC) MAXIMUM 4 DIGITS Enter desired additional numbers within 4 digits.DC REMARKS
NDA-24298 CHAPTER 4 Page 353 Issue 1 AISP : Assignment of Incoming Selection Pattern 4. Data Sheet INCOMING SELECTION TRANSLATION PATTERN NUMBER (PNI) 1 – 15ADDITIONAL DIGIT INFORMATION (DC) MAXIMUM 4 DIGITSREMARKS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
CHAPTER 4 NDA-24298 Page 354 Issue 1 AISPL : Assignment of Incoming Selection Pattern Data for LDM AISPL: Assignment of Incoming Selection Pattern Data for LDM 1. General This command is used to assign additional digits information with respect to the Incoming Selection Translation Pattern Number (PNI). This data is written in Local Data Memory (LDM). 2. Precautions 1. Since the PNI is an intermediate parameter to the ASTPL command, assign the PNI for the incoming route number by the ASTPL command before assigning the AISPL command. 2. The system processes the ASTPL/AISPL command prior to the numbering plan data. Thus, if the LCR access code is added to the received numbers by the ASTPL/AISPL command, the system processes the LCR related command such as ASPAL/AFRSL/AOPRL. 3. Data Entry Instructions Enter the PNI assigned by the ASTPL command. 1PNI INCOMING SELECTION TRANSLATION PATTERN NUMBER (PNI) 1-15ADDITIONAL DIGIT INFORMATION (DC) MAXIMUM 4 DIGITS Enter desired additional numbers within 4 digits.DC REMARKS
NDA-24298 CHAPTER 4 Page 355 Issue 1 AISPL : Assignment of Incoming Selection Pattern Data for LDM 4. Data Sheet INCOMING SELECTION TRANSLATION PATTERN NUMBER (PNI) 1 – 15ADDITIONAL DIGIT INFORMATION (DC) MAXIMUM 4 DIGITSREMARKS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
CHAPTER 4 NDA-24298 Page 356 Issue 1 AISPN : Assignment of Incoming Selection Pattern Data for NDM AISPN: Assignment of Incoming Selection Pattern Data for NDM 1. General This command is used to assign additional digits information with respect to the Incoming Selection Translation Pattern Number (PNI). The data assigned by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN). 2. Precautions 1. Since the PNI is an intermediate parameter to the ASTPN command, assign the PNI for the incoming route number by the ASTPN command before assigning the AISPN command. 2. The system processes the ASTPN/AISPN command prior to the numbering plan data. Thus, if the LCR access code is added to the received numbers by the ASTPN/AISPN command, the system processes the LCR related command such as ASPAN/AFRSN/AOPRN. 3. Data Entry Instructions Enter the PNI assigned by the ASTPN command. 1PNI INCOMING SELECTION TRANSLATION PATTERN NUMBER (PNI) 1-15ADDITIONAL DIGIT INFORMATION (DC) MAXIMUM 4 DIGITS Enter desired additional numbers within 4 digits.DC REMARKS