NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 967 Issue 1 APLNN : Assignment of Physical LENS Number for NDM INPUT TYPE (TYPE)NEW FUSION POINT CODE (NEW FPC) 1-253NEW LINE EQUIPMENT NUMBER (NEW LENS)REMARKS
CHAPTER 4 NDA-24298 Page 968 Issue 1 APLNN : Assignment of Physical LENS Number for NDM (b) When “TYPE=STN” is selected USER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN)NOW FUSION POINT CODE (OLD FPC) 1-253NOW LINE EQUIPMENT NUMBER (OLD LENS)NOW TENANT NUMBER (OLD TN)NOW STATION NUMBER (OLD STN)
NDA-24298 CHAPTER 4 Page 969 Issue 1 APLNN : Assignment of Physical LENS Number for NDM INPUT TYPE (TYPE)NEW FUSION POINT CODE (NEW FPC) 1-253NEW TENANT NUMBER (NEW TN)NEW STATION NUMBER (NEW STN)REMARKS
CHAPTER 4 NDA-24298 Page 970 Issue 1 ATDF : Assignment of Time Difference Data ATDF: Assignment of Time Difference Data 1. General This command is required when there is time difference within the Fusion link. The difference of time between nodes and the UCT (Universal Coordinated Time) are written in Network Data Memory (NDM) of the Network Control Node (NCN) by using this command. 2. Precautions 1. When SIGN = “0,” HOUR and MINUTE are not available. Therefore, if SIGN = “0,” the data is deleted. 2. For detailed information, see the NEAX2400 IPX Fusion Network System Manual. 3. Data Entry Instructions FUSION POINT CODE (FCP) 1-253SIGN OF DIFFERENCE TIME (SIGN) 0-2HOUR OF DIFFERENCE TIME DATA (HOUR) 00 -12MINUTE OF DIFFERENCE TIME DATA (MINUTE) 00-59 REMARKS 10 1 0600 11 1 0630 FPC Enter FPC which has Time difference. HOUR Enter the digits ranging from 0-12. SIGN 0 = No Data 1 = Plus (+) 2 = Minus (-)MINUTE Enter the digits ranging from 0-59.
NDA-24298 CHAPTER 4 Page 971 Issue 1 ATDF : Assignment of Time Difference Data 4. Data Sheet FUSION POINT CODE (FPC) 1-253(SIGN) 1/2HOUR (HOUR) 0-12MINUTE (MINUTE) 0-59REMARKS
CHAPTER 4 NDA-24298 Page 972 Issue 1 AMWF : Assignment of Message Waiting Remote FPC for LDM AMWF: Assignment of Message Waiting Remote FPC for LDM 1. General This command assigns the Fusion Point Code (FPC) of Remote nodes in the Fusion Network for Message Waiting control. 2. Precautions 1. This data is necessary at the center node having Message Center Interface. 3. Data Entry Instructions Remote FPC Assignment Number (CNT) 0-252Remote FPC for Message Waiting Function Control (REMOTE FPC) 1-253FPC of Self Node (CENTER FPC) 1-253REMARKS This parameter is for display only.CENTER FPCEnter FPC of Remote node to each CNT.REMOTE FPC 0 1 2
NDA-24298 CHAPTER 4 Page 973 Issue 1 AMWF : Assignment of Message Waiting Remote FPC for LDM 4. Data Sheet REMOTE FPC ASSIGNMENT NUMBER (CNT) 0-252REMOTE FPC FOR MESSAGE WAITING FUNCTION CONTROL (REMOTE FPC) 1-253REMARKS
CHAPTER 4 NDA-24298 Page 974 Issue 1 AFRFL : Assignment of Flexible Route Data for Fusion for LDM AFRFL: Assignment of Flexible Route Data for Fusion for LDM 1. General This command assigns the alternative route data via C.O. or tie line in case all the connection trunks are busy or FCCS link failure (Layer 2 down) has occurred. 2. Precautions 1. Prior to this command assignment, the following data should be set. (a) The numbering plan data for the route to be designated here. (b) The station-to-station calling activated via FCCS is allowed. 3. Data Entry Instructions TN Enter the tenant number of the calling party.FPC Enter the fusion point code of the terminating node. ACC MAX. 24 digits TN FPC (1-253)
NDA-24298 CHAPTER 4 Page 975 Issue 1 AFRFL : Assignment of Flexible Route Data for Fusion for LDM 4. Data Sheet TN FPC (1-253)ACC MAX. 24 digits
CHAPTER 4 NDA-24298
Page 976
Issue 1
AFUGN : Assignment of EX-FCCS Fusion Group Data for NDM
AFUGN: Assignment of EX-FCCS Fusion Group Data for NDM
1. General
This command is used to assign and read the data related to Fusion Group Number in multiple FCCS networks
connected via CCIS link.
2. Precautions
1. One Fusion Group Number cannot be allocated to some Fusion Groups in duplicate.
2. When other than number “0” is entered to CON_FUG, “0” cannot be entered to the corresponding
NCN_FPC.
3. A single FUG is to be designated as the Center FUG.
3. Data Entry Instructions
SELF FUSION
GROUP NUMBER
(SELF_FUG)
0-4CENTER
FUSION
GROUP
(CENTER)CONNECTION
FUSION GROUP
(CON_FUG)
0-4NCN Fusion
Point Code
(NCN_FPC)
0-253REMARKS
SELF_FUG
Enter the Self Fusion Group
Number.CON_FUG
0: Delete Data
1-4: Fusion Group Number connected to Self FUG. (Assign all
the FUGs in the network.)
0: Delete Data
1-253: FPC of NCN in the connected
Fusion Group.NCN_FPC
Check box is provided whether the
Self-FUG is the Center Fusion Group
or not.CENTER