NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 977 Issue 1 AFUGN : Assignment of EX-FCCS Fusion Group Data for NDM 4. Data Sheet SELF FUSION GROUP NUMBER (SELF_FUG) 0-4CENTER FUSION GROUP (CENTER)CONNECTION FUSION GROUP (CON_FUG) 0-4NCN Fusion Point Code (NCN_FPC) 0-253REMARKS
CHAPTER 4 NDA-24298 Page 978 Issue 1 AEXFN : Assignment of EX-FCCS CCH Selection Data for NDM AEXFN: Assignment of EX-FCCS CCH Selection Data for NDM 1. General This command is used to assign, delete and read out the Point Code data for connecting to each FPC in one Fusion Group (FUG) within multiple FCCS networks connected via CCIS link. 2. Precautions 1. This command is not valid when the Self Fusion Group Number has not been allocated by the AFUGN command. 2. Self Fusion Group Number cannot be entered in FUG parameter. 3. Data Entry Instructions FUSION GROUP NUMBER (FUG) 1-4FUSION POINT CODE (FPC) 1-253POINT CODE (PC) 1-16383REMARKS FUG Destination Fusion Group Number connected to Self FUG.FPC Enter all the FPC in the destination FUG connected to Self-FUG. Assign all the Point Code in destination FUG via CCIS network.PC
NDA-24298 CHAPTER 4 Page 979 Issue 1 AEXFN : Assignment of EX-FCCS CCH Selection Data for NDM 4. Data Sheet FUSION GROUP NUMBER (FUG) 1-4FUSION POINT CODE (FPC) 1-253POINT CODE (PC) 1-16383REMARKS
CHAPTER 4 NDA-24298 Page 980 Issue 1 AEADN : Assignment of EX-FCCS ADC Data for NDM AEADN: Assignment of EX-FCCS ADC Data for NDM 1. General This command is used to assign, delete and read Abbreviated Digit Code (ADC) for connected Fusion Group (FUG) within multiple FCCS networks via CCIS link. 2. Precautions 1. This command is not valid when the Self Fusion Group Number has not been assigned by the AFUGN command. 2. Self Fusion Group Number cannot be assigned at this command. 3. Data Entry Instructions FUSION GROUP NUMBER (FUG) 1-4TENANT NUMBER (TN)ABBREVIATED DIGIT CODE (ADC) MAX. 6 DIGITSREMARKS FUG Fusion Group Number of destination group. Note: Self Fusion Group cannot be entered. Abbreviated Digit Code for the destination FUG.ADCEnter the Tenant Number.TN
NDA-24298 CHAPTER 4 Page 981 Issue 1 AEADN : Assignment of EX-FCCS ADC Data for NDM 4. Data Sheet FUSION GROUP NUMBER (FUG) 1-4TENANT NUMBER (TN)ABBREVIATED DIGIT CODE (ADC) MAX. 6 DIGITSREMARKS
CHAPTER 4 NDA-24298 Page 982 Issue 1 AELGN : Allocation of EX-FCCS Telephone Number Data for NDM AELGN: Allocation of EX-FCCS Telephone Number Data for NDM 1. General This command is used to assign, delete and read Telephone Number data in multiple FCCS networks connected via CCIS link. When assigning the data logging in to the NCN of Center FUG by using this command, the data in NDM of all the LNs in Self FUG and NCN/LN in other FUGs are updated simultaneously. 2. Precautions 1. This command cannot be used when the Self Fusion Group Number has not been assigned by the AFUGN command. 2. Only the readout function is activated in this command when both Self FUG Number and Connected FUG Number are already assigned, provided that Self FUG is not the Center FUG. 3. Telephone Numbers used in the multiple FCCS networks and the existing Telephone Numbers used in self FUG only (assigned by the ALGSN command) are managed in different table in NDM. 4. Telephone Numbers can be assigned up to 120,000 in the whole network (including Telephone Numbers for NEAX2000 IVS 2 system), and 48,000 in one FUG. 5. By designating UGN (1) and TELN, the already assigned AELGN data can be read out.
NDA-24298 CHAPTER 4 Page 983 Issue 1 AELGN : Allocation of EX-FCCS Telephone Number Data for NDM 3. Data Entry Instructions Note:Parameters marked* are required only when NEAX2400 IPX is selected in “SYSTEM” parameter. USER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN) MAX. 8 DIGITSINPUT TYPE (TYPE) LENS/STNFUSION GROUP NUMBER (FUG) 1-4 SYSTEM FUG* Enter the FUG Number the designated station belongs.UGN Fixed to “1”. Check either of the check box, allocation of the Telephone Numbers is executed by designating LENs or Station Number.TYPE*Enter the unique Telephone Number in the whole network.TELN SYSTEM TYPE (SYSTEM) IMX/IVS 2 Check either of the check box depending on the system type, NEAX2400 IMX 1/4/16-IMG system or NEAX2400 IVS system. 2 FUSION POINT CODE (FPC) 1-253LINE EQUIPMENT NUMBER (LENS)POINT CODE (PC) 1-16383 STATION NUMBER (STN) MAX. 6 DIGITSCONNECTION FUSION GROUP (CON_FUG) 1-4 PCFPC* Enter the Fusion Point Code of the station belongs.TN* Enter the Tenant Number when “STN” is checked in “TYPE” parameter. LENS* Enter the Station Number when “STN” is checked in “TYPE” parameter. STN*Fusion Group Number connected to the Self- FUG (display only).CON_FUG TENANT NUMBER (TN) Enter the Point Code assigned to CCIS Network. This parameter is required for NEAX2000 IVS system only. 2 MG U G LV When “LENS” is checked in the “TYPE” parameter, enter the Line Equipment Number of the designated station.
CHAPTER 4 NDA-24298 Page 984 Issue 1 AELGN : Allocation of EX-FCCS Telephone Number Data for NDM 4. Data Sheet USER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN) MAX. 8 DIGITSSYSTEM TYPE (SYSTEM) IPX/IVS 2 INPUT TYPE (TYPE) LENS/STNFUSION GROUP NUMBER (FUG) 1-4
NDA-24298 CHAPTER 4 Page 985 Issue 1 AELGN : Allocation of EX-FCCS Telephone Number Data for NDM FUSION POINT CODE (FPC) 1-253LINE EQUIPMENT NUMBER (LENS)TENANT NUMBER (TN)STATION NUMBER (STN) MAX. 6 DIGITSPOINT CODE (PC) 1-16383 MG U G LV
CHAPTER 4 NDA-24298 Page 986 Issue 1 This page is for your notes.