Home > NEC > Communications System > NEC Neax 2400 Ipx Office Data Specification

NEC Neax 2400 Ipx Office Data Specification

    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1020
    							NDA-24298 CHAPTER 4
    Page 747
    Issue 1
    ACFCL : Assignment of Call Forwarding by SFC for LDM
    (c) TYPE = 3 (ASYD SYS1, INDEX5 bit0 = 0 and INDEX79 bit2 = 1 is assigned);
    DAY/ NIG HT  
    MODE 
    (D/N)TENANT 
    NUMBER 
    (TN)SERVICE 
    FEATURE 
    CLASS
    (SFC)
    0-15
    CALL FORWARD ALL CALLS DESTINATION FOR 
    STATIONS
    (CFAS) 
    MAX. 24 DIGITS [0-9, *, #]CALL FORWARD BUSY/DO NOT ANSWER  
    DESTINATION FOR STATIONS
    (CFBS/CFDS) 
    MAX. 24 DIGITS [0-9, *, #]
    CALL FORWARD ALL CALLS DESTINATION FOR 
    TRUNKS
    (CFAT) 
    MAX. 24 DIGITS [0-9, *, #]CALL FORWARD BUSY/DO NOT ANSWER  
    DESTINATION FOR TRUNKS
    (CFBT/CFDT) 
    MAX. 24 DIGITS [0-9, *, #]
    D/N TN SFC
    CFAS
    MAX. 24 DIGITS [0-9, *, #]CFBS/CFDS
    MAX. 24 DIGITS [0-9, *, #]
    CFAT
    MAX. 24 DIGITS [0-9, *, #]CFBT/CFDT
    MAX. 24 DIGITS [0-9, *, #]
    D/N TN SFC
    CFAS
    MAX. 24 DIGITS [0-9, *, #]CFBS/CFDS
    MAX. 24 DIGITS [0-9, *, #]
    CFAT
    MAX. 24 DIGITS [0-9, *, #]CFBT/CFDT
    MAX. 24 DIGITS [0-9, *, #]
    D/N TN SFC
    CFAS
    MAX. 24 DIGITS [0-9, *, #]CFBS/CFDS
    MAX. 24 DIGITS [0-9, *, #]
    CFAT
    MAX. 24 DIGITS [0-9, *, #]CFBT/CFDT
    MAX. 24 DIGITS [0-9, *, #]
    D/N TN SFC
    CFAS
    MAX. 24 DIGITS [0-9, *, #]CFBS/CFDS
    MAX. 24 DIGITS [0-9, *, #]
    CFAT
    MAX. 24 DIGITS [0-9, *, #]CFBT/CFDT
    MAX. 24 DIGITS [0-9, *, #] 
    						
    							CHAPTER 4 NDA-24298
    Page 748
    Issue 1
    ACFCL : Assignment of Call Forwarding by SFC for LDM
    (d) TYPE = 4 (ASYD SYS1, INDEX5 bit0 = 1 and INDEX79 bit2 = 1 is assigned);
    DAY/ NIG HT  
    MODE 
    (D/N)TENANT 
    NUMBER 
    (TN)SERVICE 
    FEATURE 
    CLASS
    (SFC)
    0-15
    CALL FORWARD ALL CALLS 
    DESTINATION  FOR STATIONS
    (CFAS) 
    MAX. 24 DIGITS [0-9, *, #]CALL FORWARD BUSY 
    DESTINATION FOR STATIONS
    (CFBS) 
    MAX. 24 DIGITS [0-9, *, #]CALL FORWARD DO NOT ANSWER 
    DESTINATION FOR STATIONS
    (CFDS)
    MAX. 24 DIGITS [0-9, *, #]
    CALL FORWARD ALL CALLS 
    DESTINATION  FOR TRUNKS
    (CFAT) 
    MAX. 24 DIGITS [0-9, *, #]CALL FORWARD BUSY 
    DESTINATION FOR TRUNKS
    (CFBT) 
    MAX. 24 DIGITS [0-9, *, #]CALL FORWARD DO NOT ANSWER 
    DESTINATION FOR TRUNKS
    (CFDT)
    MAX. 24 DIGITS [0-9, *, #]
    D/N TN SFC
    CFAS
    MAX. 24 DIGITS [0-9, *, #]CFBS 
    MAX. 24 DIGITS [0-9, *, #]CFDS
    MAX. 24 DIGITS [0-9, *, #]
    CFAT
    MAX. 24 DIGITS [0-9, *, #]CFBT
    MAX. 24 DIGITS [0-9, *, #]CFDT
    MAX. 24 DIGITS [0-9, *, #]
    D/N TN SFC
    CFAS
    MAX. 24 DIGITS [0-9, *, #]CFBS 
    MAX. 24 DIGITS [0-9, *, #]CFDS
    MAX. 24 DIGITS [0-9, *, #]
    CFAT
    MAX. 24 DIGITS [0-9, *, #]CFBT
    MAX. 24 DIGITS [0-9, *, #]CFDT
    MAX. 24 DIGITS [0-9, *, #]
    D/N TN SFC
    CFAS
    MAX. 24 DIGITS [0-9, *, #]CFBS 
    MAX. 24 DIGITS [0-9, *, #]CFDS
    MAX. 24 DIGITS [0-9, *, #]
    CFAT
    MAX. 24 DIGITS [0-9, *, #]CFBT
    MAX. 24 DIGITS [0-9, *, #]CFDT
    MAX. 24 DIGITS [0-9, *, #]
    D/N TN SFC
    CFAS
    MAX. 24 DIGITS [0-9, *, #]CFBS 
    MAX. 24 DIGITS [0-9, *, #]CFDS
    MAX. 24 DIGITS [0-9, *, #]
    CFAT
    MAX. 24 DIGITS [0-9, *, #]CFBT
    MAX. 24 DIGITS [0-9, *, #]CFDT
    MAX. 24 DIGITS [0-9, *, #] 
    						
    							NDA-24298 CHAPTER 4
    Page 749
    Issue 1
    ASLU1 : Assignment of Slumber Time Data 1
    ASLU1: Assignment of Slumber Time Data 1
    1. General
    This command assigns the data related to the Slumber Time - Do Not Disturb service feature.
    2. Precautions
    1. The call terminating to the slumber group is forwarded to an Attendant Console or an Announcement
    trunk (DAT circuit card) with a predetermined slumber time.
    2. The station numbers belonging to the slumber group are assigned by the ASLU1 command.
    3. The slumber time period and the forwarded destination are assigned by the ASLU2 command.
    4. The G parameter on this command is intermediate data to assign the ASLU2 command.
    5. Denial of the Slumber Time - Do Not Disturb service feature can be assigned by the following commands:
    (a) ARTD command, SLOV = 1 is assigned for trunk route
    or
    (b) ASFC command SFI = 107, RES = 1 is assigned for the class of the originating station
    3. Data Entry Instructions
    TENANT
    NUMBER
    (TN)STATION NUMBER
    (STN)SLUMBER GROUP
    NUMBER
    (G)
    1-7
    REMARKS
    G
    Enter data in the G parameter. Multiple numbers of STN 
    can be assigned to a slumber group number.
    STN
    Enter the station number of the 
    slumber group. 
    						
    							CHAPTER 4 NDA-24298
    Page 750
    Issue 1
    ASLU1 : Assignment of Slumber Time Data 1
    4. Data Sheet
    TENANT
    NUMBER
    (TN)STATION
    NUMBER
    (STN)SLUMBER GROUP
    NUMBER 
    (G)
    1 – 7REMARKS 
    						
    							NDA-24298 CHAPTER 4
    Page 751
    Issue 1
    ASLU1_T : Assignment of Slumber Time Data 1 – Telephone Number
    ASLU1_T : Assignment of Slumber Time Data 1 – Telephone Number
    1. General
    This command is used to assign the data related to the Slumber Time - Do Not Disturb service feature. The sta-
    tion data of ASLU1 command can be assigned by using Telephone Number.
    2. Precautions
    1. Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the
    ALGSL command is not available in this command.
    2. In case logging in to a LN, only the Telephone Numbers allocated to the stations within the logged-in
    node can be used in this command. Also, when logging in to the NCN, the data memory of the whole
    nodes in the network is to be written.
    3. The call terminated to the slumber group is forwarded to an Attendant Console or an Announcement trunk
    (DAT circuit card) with a predetermined slumber time.
    4. The Telephone Number of the station belongs to the slumber group is assigned by this command.
    5. The slumber time period and the forwarded destination are assigned by the ASLU2 command.
    6. The “G” parameter on this command is intermediate data to assign the ASLU2 command.
    7. Denial of the Slumber Time - Do Not Disturb service feature can be assigned by either of the following
    commands:
    (a) ARTD command, SLOV=1 is assigned for trunk route
    (b) ASFC command, SFI=107, RES=1 is assigned for the class of the originating station
    3. Data Entry Instructions
    Note:The existing data can be readout by pressing “Get” button after UGN and TELN data is entered.
    USER
    GROUP
    NUMBER
    (UGN)SLUMBER
    GROUP
    NUMBER
    (G)
    1-7TELEPHONE NUMBER 
    (TELN)
    Max. 16 digitsREMARKS
    TELN
    Enter the Telephone Number of the 
    station which belongs to the Slumber 
    Group.
    G
    Assign the Slumber Group Number for the 
    station designated by TELN parameter. 
    Multiple numbers of station can be assigned 
    to a slumber group number. 
    						
    							CHAPTER 4 NDA-24298
    Page 752
    Issue 1
    ASLU1_T : Assignment of Slumber Time Data 1 – Telephone Number
    4. Data Sheet
     
    USER
    GROUP
    NUMBER
    (UGN)TELEPHONE NUMBER
    (TELN) 
    Max. 16 digitsSLUMBER
    GROUP
    NUMBER
    (G)
    1-7REMARKS 
    						
    							NDA-24298 CHAPTER 4
    Page 753
    Issue 1
    ASLU2 : Assignment of Slumber Time Data 2
    ASLU2: Assignment of Slumber Time Data 2
    1. General 
    This command assigns the data related to the Slumber Time - Do Not Disturb service feature.
    2. Precautions
    1. The slumber time period and the forwarded destination are assigned by this command. A maximum of
    four (4) different time periods can be assigned as the Slumber Time. 
    2. The G parameter corresponds to the one assigned by the ASLU1 command. The station numbers
    belonging to the slumber group are assigned by the ASLU1 command.
    3. Denial of the Slumber Time - Do Not Disturb service feature can be assigned by the following commands:
    (a) ARTD command, SLOV = 1 is assigned for trunk route
    or
    (b) ASFC command SFI = 107, RES = 1 is assigned for the class of the originating station.
    4. The AAED command should also be assigned if TFR = 2 (DAT card) is assigned.
    5. Time data should be assigned as 24 hours a day (military time).
    6. When making multiple time data assignments for a specific Slumber Time Group, the time data assigned
    must not be duplicated.
    7. If the slumber service is required 24 hours a day, enter the same time data into the both parameters, FROM
    HOUR/FROM MINUTE and TO HOUR/TO MINUTE.  
    						
    							CHAPTER 4 NDA-24298
    Page 754
    Issue 1
    ASLU2 : Assignment of Slumber Time Data 2
    3. Data Entry Instructions
    SLUMBER
    TIME GROUP
    NUMBER
    (G)
    1-7CNT
    1-4TRANSFER
    KIND
    (TFR)
    1/2SLUMBER TIME
    START TIMESLUMBER TIME
    END TIME
    FROM
    HOURFROM
    MINUTETO
    HOURTO MINUTE
    G
    Enter the number assigned by the ASLU1 
    command.SLUMBER TIME
    Enter the time period for restricting the incoming call.
    TFR
    1 = Attendant
    2 = Announcement 
    						
    							NDA-24298 CHAPTER 4
    Page 755
    Issue 1
    ASLU2 : Assignment of Slumber Time Data 2
    4. Data Sheet
     
    SLUMBER TIME 
    GROUP 
    NUMBER
    (G)
    1-7CNT
    1-4TRANSFER KIND 
    (TFR)
    1/2SLUMBER TIME 
    START TIMESLUMBER TIME 
    END TIME 
    REMARKS
    FROM HOURFROM 
    MINUTETO  
    HOURTO  
    MINUTE
    1
    2
    3
    4
    1
    2
    3
    4
    1
    2
    3
    4
    1
    2
    3
    4
    1
    2
    3
    4
    1
    2
    3
    4
    1
    2
    3
    4 
    						
    							CHAPTER 4 NDA-24298
    Page 756
    Issue 1
    ACSA : Assignment of Connection Service Index A
    ACSA: Assignment of Connection Service Index A
    1. General
    This command assigns the call termination for CAS Line and Direct-in Termination (Day Only). 
    2. Precautions
    1. The ACFR command assignment is also required to assign the trunk incoming call termination service
    feature.
    2. CAS data at the Satellite Station
    (a) It is necessary to set the Telephone Class (TEC) of the CAS Line to “15” in the ASDT command.
    (b) A ring-down incoming call from a C.O. line is terminated to the CAS Line.
    3. When assigning CSIA=3 (Direct-in Termination-outside (Day Only)), the ADC should be assigned by the
    ASPD command. 
    4. Use the ACSI command instead of this command if Direct-in Termination (Day and Night Mode) or
    Direct-in Termination (Night Mode) is required. 
    5. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. 
    3. Data Entry Instructions
    ROUTE
    NUMBER 
    (RT)CONNECTION 
    SERVICE 
    INDEX A
     (CSIA) 
    1-7 TRUNK
    NUMBER 
    (TN)TENANT
    NUMBER 
    (TN)STATION NUMBER 
    (STN)ABBREVIATED 
    DIGIT CODE (ADC) 
    MAX. 4 DIGITS TERMINATING  STATION 
    CSIA
    1 = CAS Line
    2 = Direct-In Termination (Day only)
    3 = Direct-In Termination-Outside (Day only)
    4-7 = Not used
    1 0 0 1 1 or 2 0 1 0 3 1 1 1
    20013 0011
    ADC
    This parameter is required only for 
    CSIA=3. 
    						
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Ipx Office Data Specification