NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 407 Issue 1 ATNR : Assignment of Tenant Restriction Class Data 4. Data Sheet DAY/NIGHT MODE D/NORIGINATING TENANT (OGTN) TENANT RESTRICTION INDEX (TRI) 0 - 15TERMINATING TENANT (TMTN) 123456789101112131415 0 1 2 3 4 5 6 7 8-15
CHAPTER 4 NDA-24298 Page 408 Issue 1 AABD : Assignment of Speed Calling Restriction Data AABD: Assignment of Speed Calling Restriction Data 1. General This command assigns the Speed Calling system Restriction Data. This data is added to the Service Feature Class of an individual station assigned to the Speed Calling system in order to restrict it from originating calls. 2. Precautions 1. The Abbreviated Digit Codes (ADC) should already be assigned by the ASPD command. 2. The Speed Calling Override Service must be assigned by the ASYD command, SYS2, Index1, b6=1. 3. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX8. 3. Data Entry Instructions 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RESTRICTION DATA (RES) is assigned in the squares where ADC and SFC cross. When unassigned, RES or the corresponding item is recognized as “0”(Restricted). 0 = Connection is restricted 1 = Connection is allowedRES SPEED CALLING CODE (ADC) MAX. 4 DIGITS TENANT NUMBER (TN)SERVICE FEATURE CLASS (SFC) ADC The Abbreviated Digit Codes (ADC) corresponds to the data assigned by the ASPD command.
NDA-24298 CHAPTER 4 Page 409 Issue 1 AABD : Assignment of Speed Calling Restriction Data 4. Data Sheet Note:Restriction Data (RES) is assigned in the squares where SFC and ADC cross. TENANT NUMBER (TN)SPEED CALLING CODE (ADC) MAX. 4 DIGITSSERVICE FEATURE CLASS (SFC) 0123456789101112131415
CHAPTER 4 NDA-24298 Page 410 Issue 1 ASDT : Assignment of Station Data ASDT: Assignment of Station Data 1. General This command assigns/deletes the physical station data. 2. Precautions 1. This command is used for Business application. The AAST/AGST commands are used for Hotel applica- tion. 2. The ASTN command may be used to change the station number. 3. The ASCL command may be used to change the Class (TEC, RSC, and/or SFC) of the station. 4. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8. 5. The number of station number (STN) digits is designated by the ASYD command, SYS1, INDEX16. 6. The first digit of the station number (STN) is designated by the ANPD command. 7. The RSC and SFC parameter works in conjunction with the ARSC and ASFC commands respectively. 8. TEC 3 (DP/PB) is to be used in the installation test only. Give the proper TEC to each station before ser- vice-in. Note:If the PB (DTMF) station given TEC 3 tries to make a call to the PB (DTMF) route with the 2nd DT mode, the call will not be successful. 9. An example of the LENS allocation is shown in Figure 4-2. 10. LSDT (Listup of Station Data) command is used to print out the station data. At this time, ETN (Executive Tenant Number) data is also printed out. While some commands share the common TN in office data, others develop separate TN table respec- tively. In case of adapting common TN for all the commands, the TN actually assigned by the ASDT com- mand is to be executed.
NDA-24298 CHAPTER 4 Page 411 Issue 1 ASDT : Assignment of Station Data Figure 4-2 LENS LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LevelLevelLINE16 LINE15 LINE14 LINE13 LINE12 LINE11 LINE10 LINE9 LINE8 LINE7 LINE6 LINE5 LINE4 LINE3 LINE2 LINE1 The card mounted slot LINE16 LINE15 LINE14 LINE13 LINE12 LINE11 LINE10 LINE9 LINE8 LINE7 LINE6 LINE5 LINE4 LINE3 LINE2 LINE1 The card mounted slot Odd Number Group Even Number GroupGroup n Group n+2 Group n+1 Group n+3 IN CASE OF 16 PORT/SLOT IN CASE OF 32 PORT/SLOT Note:When assigning Dterm, TEC parameters should be as follows: 16ELC MODE 8DLC MODE LINE TEC LINE TEC 1 - 16 12 (Voice)1 - 4 12 (Voice) 5 - 8 13 (Data) 9 - 12 12 (Voice) 13 - 16 13 (Data)
CHAPTER 4 NDA-24298 Page 412 Issue 1 ASDT : Assignment of Station Data 3. Data Entry Instructions 1 3 0 0 0 0 0 0 1 2 0 12 1 1 Enter the station number with regard to the following: The number of station number (STN) digits is designated by the ASYD command, SYS 1, INDEX 16.STN Enter the RSC defined by the ARSC command. Since RSC = 0 is preserved for ATTCON, a station can use the RSC range of 1 to 15.RSC Enter the SFC defined by the ASFC command. Since SFC = 0 is preserved for ATTCON, a station can use the SFC range of 1 to 15.SFC STATION NUMBER (STN)LINE EQUIPMENT NUMBER (LENS)TELEPHONE EQUIPMENT CLASS (TEC) 1-31ROUTE RESTRICTION CLASS (RSC) 0-15SERVICE FEATURE CLASS (SFC) 0-15REMARKS TENANT NUMBER (TN) LENS Enter the LENS of the circuit card. Refer to Figure 4-2. TN The applicable TN is designated by the ASYD command, SYS1, INDEX 8. MG U G LV TEC 1 = DP (10 pps) 2 = PB 3 = DP/PB 4 = DP (20 pps) 5-11 = Not Used 12 = D term 13 = Data Terminal via Dterm 14 = Hot Line 15 = CAS Line 16 = Data Terminal via Data Module 17 = Not Used 18 = Virtual Line Appearance (for D term Multi-Line) 19 = TMM 20 = PSM 21 = ACD 22 = EMM 23 = ISDN Terminal 24-26 = Not Used 27 = Eight Conference Equipment 28-31 = Not Used
NDA-24298 CHAPTER 4 Page 413 Issue 1 ASDT : Assignment of Station Data 4. Data Sheet TENANT NUMBER (TN)STATION NUMBER (STN)LINE EQUIPMENT NUMBER (LENS)TELEPHONE EQUIPMENT CLASS (TEC) 1 – 31ROUTE RESTRICTION CLASS (RSC) 0 – 15SERVICE FEATURE CLASS (SFC) 0 – 15REMARKS MG U G LV
CHAPTER 4 NDA-24298 Page 414 Issue 1 ASTN : Assignment of Station Number ASTN: Assignment of Station Number 1. General This command changes the physical station number assigned to a particular LEN. 2. Precautions 1. The primary digit, the number of digits, and the kind of service (SRV = 1) which is designated by the ANPD and ASPA command affect the new station number. The new station number must be assigned according to the numbering plan data. 2. The number of Station Number (STN) digits is designated by the ASYD command, SYS1, INDEX16. 3. This command can be used only when the number of the station to be changed is in idle status. 4. Update the station number changed in this command on the data sheet in the ASDT command. 3. Data Entry Instructions OLD STATION NUMBER (STN)NEW STATION NUMBER (NEW STN) REMARKS TENANT NUMBER (TN) NEW STN Enter the new station number corresponding to the existing numbering plan. STN The station number has been assigned by the ASDT command.
NDA-24298 CHAPTER 4 Page 415 Issue 1 ASCL : Assignment of Station Class Data ASCL: Assignment of Station Class Data 1. General This command changes the Telephone Equipment Class (TEC), Route Restriction Class (RSC), and Service Feature Restriction Class (SFC), without changing the station number. 2. Precautions 1. The station class data (TEC, RSC and SFC) can be changed by the ASCL command, even if the station to be changed is in busy status. (Conversation is in progress.) When the station becomes idle, the new class becomes effective. 2. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX8. 3. The TEC cannot be changed from a D term Class (TEC = 12) to any other Telephone Class, or vice versa. When it is necessary to change the current TEC to another type of TEC, use the ASDT command to delete the current station data and assign new station data. 4. The RSC corresponds to the ARSC command, and the SFC corresponds to the ASFC command as well. 5. Update the new class data on the data sheet in the ASDT command.
CHAPTER 4 NDA-24298
Page 416
Issue 1
ASCL : Assignment of Station Class Data
3. Data Entry Instructions
1 3 1 1 3 3 1 1
Enter RSC referring to the ARSC command.RSC
Enter SFC referring to the ASFC commandSFC
STATION NUMBER
(STN)TELEPHONE
EQUIPMENT
CLASS
(TEC)
1-31ROUTE
RESTRICTION
(RSC)
0-15SERVICE
FEATURE
CLASS
(SFC)
0-15REMARKS TENANT
NUMBER
(TN)
TEC
1 = DP (10pps) 2 = PB 3 = DP/PB 4 = DP (20 pps) 5-11 = Not used
12 = D
term13 = Data Terminal via Dterm14 = Hot Line
15 = CAS Line 16 = Data Terminal via Data Module
17 = Not used 18 = Virtual Line Appearance 19-22 = Not used
23 = ISDN Terminal 24-25 = Not used 26 = Not used
27 = Eight Conference Equipment 28-31 = Not used
(Add-on Conferencing)