NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4
Page 457
Issue 1
AKYD_T : Assignment of Key Data for Dterm – Telephone Number
3. Data Entry Instructions
LN PRE
0 = Prime Line pickup
1 = Customize (Line
Preference data are to
be set for the other
buttons)
TP
DATAMEANING
D
term Series III Dterm Series E
0
1
2
3
Note 2 Note 1
8-button or 16-button type
24-button type or 16-button type
with Add on Module
8/16-button type + FLEX keys
24-button type + FLEX keys or
16-button type with Add on Module
+ FLEX keys8-button or 16-button type
32-button type (with Add on Module)
8/16-button type + FLEX keys
32-button type (with Add on Module)
+ FLEX Keys
MY LINE
PRIME LINE
USER
GROUP
NUMBER
(UGN)
USER GROUP
NUMBER
(PL UGN) PRIORITY OF
ANSWERING
CALL
(PRI)
0-4
ALLOW OG
FROM
PRIME
LINE
(S)
0/1MESSAGE
WAITING DATA
DISPLAY
SELECTION
(MWD)
0/1TELEPHONE NUMBER
(TELN)
TELEPHONE NUMBER
(PL TELN)
LINE
PREFERENCE
(LN PRE)
0/1TYPE OF
DTERM
(TP)
0-3 LINE
PREFERENCE
FOR SPEAKER
BUTTON
(SPK)
0-3LINE
PREFERENCE
FOR ANSWER
BUTTON
(ANS)
0-2LINE
PREFERENCE
FOR
OUT GOING
BUTTON
(ORG)
0/1
S
OFF-HOOK suppression
0=No 1=Yes
PRI
L: As per Preference pattern when
the SPEAKER button is pressed.
D: Dial Intercom Line
(Ringing Station)
A: Automatic Intercom Line
(Ringing Station)
M: Manual Intercom Line
(Signaling Station)
PRILINE PREFERENCE
1
L
D
A
M
A2
L
L
L
M3
L 0
1
2
3
4
ANS
This data is only available in case of LN PRE=1.
0 = Prime Line Preference
1 = Incoming Line Preference
2 = Ringing Line Preference
SPK
This data is only available in case of LN PRE =1
0 = Prime Line Preference
1 = Idle Line Preference
2 = Incoming Line Preference
3 = Ringing Line Preference
MWD
0 = MW data display on the top line
1 = MW data display on the bottom lineORG
This data is only available in case of
LN PRE=1.
0 = Prime Line Preference
1 = Idle Line Preference
The data assigned to the parameter
“TP” may
differ depending on the parameter
“KYI”, or
“KYI2”. See the below.
Note 1: When no data is assigned to KYN2,
the system recognizes as TP=0.
Note 2: (1) When no data is assigned to
KYN=17 or later/KYN2, the sys-
tem recognizes as TP=0.
(2) When data is assigned to KYN=17
or later and no data is assigned to
KYN2, the system recognizes as
TP=1.
CHAPTER 4 NDA-24298 Page 458 Issue 1 AKYD_T : Assignment of Key Data for Dterm – Telephone Number Note:The existing data can be readout by pressing Get” button after UGN and TELN data is entered. For the Line/Feature keys For the Flex keys Enter unique number for each Intercom group within the range from 1 to 50. See the Table on the next page.G-ID KEY NUMBER (KYN)SERVICE CONDITION (KYI) 0-2FEATURE KEY CODE (FKY) 1-320KIND OF LINE (KD) 0-2USER GROUP NUMBER (ML UGN)TELEPHONE NUMBER (ML TELN)RING INFORMA- TION FOR EACH LINE (RG) 0-7KIND OF INTERCOM (ICM) 0-2 0 = Line 1 = Intercom 2 = DSS KeyKD 0 = Automatic 1 = Manual 2 = DialICMEnter the type of keys. 0 = Key is not used 1 = Function Key 2 = Multi-LineKYIFKYSee the Table on the next page.RG GROUP ID NUMBER (G-ID) 1-50 1 2 MULTILINE INTERCOM KEY NUMBER (KYN 2)SERVICE CONDITION FOR FLEX KEYS (KYI 2) 0/1FEATURE KEY CODE FOR FLEX KEYS (FKY) Enter the type of keys. 0 = Key is not used 1 = Function KeyKYI 2 1 2
NDA-24298 CHAPTER 4 Page 459 Issue 1 AKYD_T : Assignment of Key Data for Dterm – Telephone Number Table 4-16 FKY Table 4-17 RG RG (0-7)RINGING DELAY TIME DAY NIG HT 0 NO (No Ringing) No Ringing 1 YES (Ringing) No Ringing 0 sec. 2 NO (No Ringing) Ringing 0 sec. 3 Not used Not used 4 YES (Ringing) Ringing 30 sec. 5 YES (Ringing) Ringing 20 sec. 6 YES (Ringing) Ringing 10 sec. 1 2 3 4 5 6 7 8 10 11 12 13 14 15 16 17 18 19 20 21 22 23-25Call Forwarding-Busy Line Call Forwarding-All Calls Executive Right of Way Call Waiting Call Back Message Reminder Save and Repeat Last number call Boss-Secretary-Message Waiting Lamp Control; Set Call Hold Boss-Secretary-Message Waiting Lamp Control; Cancel Call Pickup-Group Three-way Calling Voice Call Speed Calling-System Function CAS SHF Call Transfer - All Calls UCD Busy Out Non-Exclusive Hold/Exclusive Hold (Hold) Flash Button Call Forwarding-Don’t Answer - FKY Service name FKY Service nameFKY Service nameFKY(1-320) 31 32 33 34-46 47 48 49 50 51 52 53-54 55 56 57 58 59 60 61-82 83 84 85 86 87 88 89 90 91 92 93Data Transfer (DTX) - Message Waiting Lamp (MW) - UCD Call Waiting Lamp (In case Business Application)/End (END)/(In case Hotel Application) Privacy Release Speed Calling - One Touch Do Not Disturb Microphone Speaker - PAGE OFF/ON HOOK FOR HEADSET Recall - Release Key Manual Signaling Key - Retain Conference Serial Call Internal Zone Paging - Wake Up Set (Note 1) Wake Up Reset Do Not Disturb Set (Note 2) Do Not Disturb Reset Room Cut Off Set (Note 3) Room Cut Off Reset Message Waiting Set (Note 4) 26 27 28 29 30Speed Calling-Station Originate (ORG) Answer (ANS) Data (DATA) Display/Auto (DSPY/AUTO)94 95 96 97 98 99 100 101 102-112 113 114 115 116 117 118 119 120 121 122Message Waiting Reset Check In Check Out Status Audit Enter Clear Enter END - Call ID change display - Call pickup expand - Ringer mute Call Return - Next page of software keys (Scroll key) Previous page of software keys (Back Scroll Key) Soft Key Assignment 123 124 125 126 127 128 129 130 131 132-320Off Hook Ringing (OFR) Mute (MUTE) Head Set (HSET) PS key Boss Move Call Block Call Trace - Disconnect Key - * * * * * * * * * * ** * * * * ** 9 This service is activated without releasing service restriction by ASFC. (Whether the service is re- stricted or not, this feature is activated.) Note 1:Fo r G u e s t Dterm in the Hotel application, this FKY is used for the WU status lamp. Note 2:Fo r G u e s t Dterm in the Hotel application, this FKY is used for the DND status lamp. Note 3:Fo r G u e s t Dterm in the Hotel application, this FKY is used for the RC status lamp. Note 4:Fo r G u e s t Dterm in the Hotel application, this FKY is used for the MW status lamp.
CHAPTER 4 NDA-24298 Page 460 Issue 1 AKYD_T : Assignment of Key Data for Dterm – Telephone Number 4. Data Sheet (a) When KD = 0/1 (for Key assignment of Line key/Intercom key) MY LINE USER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN) PRIORITY OF ANSWERING CALL (PRI) 0-4PRIME LINE USER GROUP NUMBER (PL UGN)TELEPHONE NUMBER (PL TELN) ALLOW OG FROM PRIME LINE (S) 0/1MESSAGE WAITING DATA DIS- PLAY SELECTION (MWD) 0/1LINE PREFERENCE (LN PRE) 0/1LINE PREFERENCE FOR SPEAKER BUTTON (SPK) 0-3LINE PREFERENCE FOR ANSWER BUTTON (ANS) 0-2LINE PREFERENCE FOR OUT GOING BUTTON (ORG) 0/1TYPE OF DTERM (TP) 0-3 KEY NUMBER (KYN)SERVICE CONDITION (KYI) 0 – 2FEATURE KEY CODE (FKY) 1-320KIND OF LINE (KD) 0-2MULTI LINE INTERCOM USER GROUP NUMBER (ML UGN)TELEPHONE NUMBER (ML TELN)RING INFORMATION FOR EACH LINE (RG) 0-7KIND OF INTERCOM (ICM) 0-2GROUP ID NUMBER (G-ID) 1-50 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
NDA-24298 CHAPTER 4 Page 461 Issue 1 AKYD_T : Assignment of Key Data for Dterm – Telephone Number Note 1: When KYI = None, it is not necessary to assign any data. Note 2:When KYI = FUNCTION, assign data for FKY only. Note 3:When KYI = Multi-Line, assign data for multiple telephone only. 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 F1 F2 F3 F4 F5 F6 F7 F8 KEY NUMBER (KYN)SERVICE CONDITION (KYI) 0 – 2FEATURE KEY CODE (FKY) 1-320KIND OF LINE (KD) 0-2MULTI LINE INTERCOM USER GROUP NUMBER (ML UGN)TELEPHONE NUMBER (ML TELN)RING INFORMATION FOR EACH LINE (RG) 0-7KIND OF INTERCOM (ICM) 0-2GROUP ID NUMBER (G-ID) 1-50
CHAPTER 4 NDA-24298 Page 462 Issue 1 AKYD_T : Assignment of Key Data for Dterm – Telephone Number (b) When KD = 2 (for key assignment of DSS Console). KEY NUMBERUSER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN)REMARKS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
NDA-24298 CHAPTER 4 Page 463 Issue 1 AFDD : Assignment of Function Display Data AFDD: Assignment of Function Display Data 1. General This command assigns the characters of soft key indication on a D term Series E. When this command is not assigned, the default (which shows on FKY parameter description on this command) is displayed. Figure 4-11 Soft Key Indication 2. Precautions 1. The LCD is 24 digits wide, and there are four soft keys. A maximum of 6 characters can be assigned for each soft key indication. 2. After the system initialization is performed, the soft key cannot be used for a minute. 3. The new LCD display programmed via this command will change after one minute passes. 4. When the station to be programmed is busy, the LCD display will not change until the station is released. 24 digits 11:20 AM WED 16 APR 1997 MIC DND >>>23456789 Soft key Soft key indication
CHAPTER 4 NDA-24298 Page 464 Issue 1 AFDD : Assignment of Function Display Data 3. Data Entry Instructions DISP DISP REMARKS 26 The soft key indication is displayed when DISP has assigned by the AFDD command. FUNCTION KEY DATA (FKY) 1-320 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23-24 25 26 27-47 48 49 50 51 52-54 55 56 57-59 60 61-82 83Call Forwarding-Busy Line Call Forwarding-All Calls Executive Right of Way Call Waiting Call Back - Save and Repeat - Boss-Secretary-Message Waiting Lamp Control; Set Call Hold Boss-Secretary-Message Waiting Lamp Control; Cancel Call Pickup-Group Three-way Calling Voice Call Speed Calling-System - CAS SHF - UCD Busy Out - Flash Button Call Forwarding-Dont Answer - - Speed Calling-Station - Privacy Release - Do Not Disturb Microphone - PAGE OFF/ON Hook for Headset - Manual Signaling Key - Retain ConferenceFDB FDA E_OVR CW CB - S&R - MW SET C_HOLD MWOFF PICK CONF VOICE S-SPD - CAS - UCDBO - FLASH FDN - - G_SPD - P-RLS - DND MIC - BPAGE - SIG - CKEEP FKY Service name Default display FKY Service name Default display 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102-112 113 114 115 116 117 118-119 120 121 122 123 124 125 126 127 128 129 130 131 132~320Serial Call Internal Zone Paging - Wake Up Set Wake Up Reset Do Not Disturb Set Do Not Disturb Reset Room Cut Off Set Room Cut Off Reset Message Waiting Set Message Waiting Reset Check In Check Out Status Audit Enter Clear Enter END - Call ID change display - Call pickup expand - Ringer mute - Next page of soft keys (Scroll key) Previous page of soft keys (Back Scroll key) - Off Hook Ringing MUTE Head Set Note 1 PS Key Boss Call Block Call Trace - Disconnect -SCALL IZP - WUS WUR DDS DDR RCS RCR MWS MWR C/I C/O STS AUD ENT E END - IDCHG - GPICK - RMUTE - >>>
NDA-24298 CHAPTER 4 Page 465 Issue 1 AFDD : Assignment of Function Display Data 4. Data Sheet FUNCTION KEY CODE (FKY)DISPLAY MESSAGE ON LCD (DISP)REMARKSFUNCTION KEY CODE (FKY)DISPLAY MESSAGE ON LCD (DISP)REMARKS
CHAPTER 4 NDA-24298 Page 466 Issue 1 ADSL : Assignment of Dterm Soft Key on LCD ADSL: Assignment of Dterm Soft Key on LCD 1. General This command creates an additional soft key pattern for D term Series E. 2. Precautions 1. Four soft keys appear on a D term Series E, and each soft key has four pages. This allows each soft key to have four different functions, and a station user may turn the soft key pages over simply by pressing the page scroll key, which may be indicated by >>>. 2. The soft key allows different functions to be assigned depending on the call status of the D term Series E station. 3. This command creates the maximum of 16 customized key patterns. Note:15 patterns at the maximum (SKP=0 is not used). 4. Soft Key Number (SKN) is the guide number to assign the function data (FKY) onto each soft key of all the pages. SKN within a soft key pattern (SKP) is illustrated in Figure 4-12. Figure 4-12 Soft Key Pattern 11:20 AM WED 16 APR 1997 MIC DND >>>23456789 SOFTWARE KEY PATTERN (SKP) SN = 0 (Idle) PAGE 0 PAGE 1 PAGE 2 PAGE 3SKN 0 SKN 4 SKN 8 SKN 12SKN 1 SKN 5 SKN 9 SKN 13SKN 2 SKN 6 SKN 10 SKN 14SKN 3 SKN 7 SKN 11 SKN 15 SKN 0 SKN 4 SKN 8 SKN 12SKN 1 SKN 5 SKN 9 SKN 13SKN 2 SKN 6 SKN 10 SKN 14SKN 3 SKN 7 SKN 11 SKN 15 SN = 6 (Trunk busy, BT connection) PAGE 0 PAGE 1 PAGE 2 PAGE 3 SN= 0 (Idle) SN= 1 (Originating, DT connection) SN= 2 (Originating, RBT connection) SN= 3 (Called station busy, BT connection) SN= 4 (Communication in progress) SN= 5 (Consultation Hold, Controlling Station) SN= 6 (Trunk busy, BT connection) SN= 7 Not used SN= 8 (Consultation Hold when Called Station is Busy - Controlling Station) SN= 9 (3-Party Conference call) SN= 10-14 Not used SN= 15 (others) Note 1 Note 1: Available only for the Station to which Busy Service is applied. Note 2: Available for software Release 9 or later. Note 1 Note 2 Note 2