NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 397 Issue 1 ASFC : Assignment of Service Feature Restriction Class 14 System Message Detail Recording (SMDR) - Trunk Basis 15 - 16 Line Load Control 17-18 - 19 Individual Speed Calling (Speed Calling - Station/Group) 20 - 21 Off-Hook OG Queuing 22 - 23 Voice Mail Password Display Elimination 24 Emergency Call 25 Call Forward Outside - Local (0 = Restricted, 1 = Allowed) 26 Call Forward Outside - Long Distance (0 = Restricted, 1 = Allowed) 27 Account Codes/Authorization Codes/Forced Account Codes 28 - 29 Direct Call Pickup 30 Off-Hook Alarm 31 SID to Terminating user DTE 32 Line Circuit Reverse Relay Control (for 16LC) 33 Periodic Time Indication Tone 34-35 - 36 Special Common Battery Station / Brokerage Hot Line (D term) 37 Radio Paging Answer 38 Meet-Me Paging 39 Individual Trunk Access 40 - 41 Timed Reminder (for Business System)/Automatic Wake Up (for Hotel System) 42 Group Announcement (for Hotel System) 43 Maid Dial (for Hotel System) 44 Last Number Call Redial 45 Special Admin. Station (for Hotel System) 46 Bad Call Notify (Faulty Trunk Report) 47 Guest Information Display Terminal (for Hotel System) 48 Disable Distinctive Ringing for analog ports (0/1:No/Yes)/Bearer service (0/1:Speech/3.1 kHz Audio) 49 - 50 Off-Premise Extension (Long Line Telephone - No Howler, No Pad Control)Table 4-8 SFI (Continued) SFI SERVICE FEATURE
CHAPTER 4 NDA-24298 Page 398 Issue 1 ASFC : Assignment of Service Feature Restriction Class 51 Boss-Secretary Features 52 Voice Call using an Access Code 53 Message Reminder using an Access Code 54 Priority Call 1 55 Priority Call 2 56 Priority Call 3 57 Priority Paging 58 Station-to-Station Station Message Detail Recording (SMDR) Call 59-61 - 62 Priority Outgoing Queue 63 Outgoing Queue Override 64-66 - 67 Call Park-Access and Answer 68 Call Park-Called 69 Automatic Message Waiting Lamp Off (for Hotel System) 70 Intercom Group 71 Distinctive Dial tone 72 Called Station Switch Hook Flash Restriction 73 - 74 Message Waiting Lamp Setting from the ATT or Station (Called) 75 Call Hold Conference 76 Trunk Override Inhibit 77 Trunk Override 78 Station Barge in From a Tie Line 79 Hold on Queuing From a Tie Line 80 8-Party Conference Terminal 81 Recording for an Internal Call 82 Message Waiting Lamp Setting from the Station (Calling) 83-86 - 87 Multi Channel Recording 88-89 - 90 Multi Channel Recording 91 Subscriber with Priority / without Priority 92 - 93 Voice Call Restrict (0 = No/1 = Yes)Table 4-8 SFI (Continued) SFI SERVICE FEATURE
NDA-24298 CHAPTER 4 Page 399 Issue 1 ASFC : Assignment of Service Feature Restriction Class 94Calling Party’s Number Display Reject to ISDN Line 95 Direct IC Call Restriction (for ACD only) 96 - 97 Send facility Message Requesting SID Information 98 Send facility Message Requesting ANI Information 99 Call Forward I’m Here (Destination) 100 Call Forward I’m Here (Origination) 101-102 - 103 Assignment of No Answer Timer for Blind Transfer to Station/Blind Transfer to Attendant 104Blind Transfer (Processing when the transfer destination station does not answer for a predetermined period of time in Blind Transfer to station service.) 105-106 - 107 Slumber Time Override 108 - 109 Advice of Charge Supplementary Service for ISDN 110-111 - 112 Voice Call during Dial Intercom 113 - 114 Display on D term when a station is in DND (0/1 = RST/DND) 115-121 - 122 Call Forward with ATT Camp-On 123-124 - 125 Pad Lock 126-127 - 128 Call Forwarding - Busy Line Override 129-130 - 131 Add on Conference - 8 Party 132-133 - 134 Internal Zone Page Calling 135 Internal Zone Page Called 136 Automatic Idle Return 137 Authorization Code Display Elimination 138 Consultation Hold Enhancement 139 -Table 4-8 SFI (Continued) SFI SERVICE FEATURE
CHAPTER 4 NDA-24298 Page 400 Issue 1 ASFC : Assignment of Service Feature Restriction Class 140Send Warning Tone to interrupted parties when THREE-WAY CALLING is established using Consultation Hold Enhancement 141-144 - 145 Internal Zone Page Answer 146 Analog Caller ID-Station 147 - 148 Personal Ringer 149-150 - 151 When CF-OUT SIDE is performed, Route Restriction Class of the station which has set CF-OUT SIDE is used 152 - 153 Analog Caller ID-Station (Single Mode) 154 - 155 Call Return 156-164 - 165 Call Block 166-167 - 168 Analog Caller ID – Station by Modem Sender 169 - 170 Call Trace 171-173 - 174 Camp On by Station 175 Advice of Charge Supplementary Service in Q.SIG Network 176-180 - 181 Station Hunting by call kind 182-255 -Table 4-8 SFI (Continued) SFI SERVICE FEATURE
NDA-24298 CHAPTER 4 Page 401 Issue 1 ASFC : Assignment of Service Feature Restriction Class 4. Data Sheet DAY/ NI GH T MODE D/NTENANT NUMBER (TN)SERVICE FEATURE INDEX (SFI) 1-255SERVICE RESTRICTION CLASS 0123456789101112131415
CHAPTER 4 NDA-24298 Page 402 Issue 1 ACFR : Assignment of Call Forwarding Restriction ACFR: Assignment of Call Forwarding Restriction 1. General This command assigns various kinds of trunk call forwarding restriction data on a tenant basis. 2. Precautions The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX8. If data for this command is common for all tenants (ASYD command, SYS1, INDEX92, bit5=1), assign TN parameter as data “1” for all tenants.
NDA-24298 CHAPTER 4
Page 403
Issue 1
ACFR : Assignment of Call Forwarding Restriction
3. Data Entry Instructions
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
1
2
3
4
5 1
RESTRICTION DATA (RES) is assigned in the squares where CCI
and TSFI cross.
0 = Transfer service is restricted.
1 = Transfer service is allowed.RES
CCI
0 = Attendant Call 1 = LDN (C.O. Line)
2 = FX 3 = WATS
4 = Tie Line 5 = CCSA
6 = Recall
7 = Call Forwarding-Busy Line
8 = Call Forwarding-Dont Answer
9 = Not used
10 = Special common Battery
11 = Inter Position Transfer
12 = Priority call
13 = Off Hook Alarm 14 = CAS (Main)
15 = Not used
TRANSFER
SERVICE
FEATURE
INDEX
(TSFI) 1-15 TENANT
NUMBER
(TN)CALL CATEGORY INDEX (CCI) 0-15
TSFI
1 = Call Forwarding (-All Calls/-Dont Answer/
-Busy Line/Unused Number/Dead Level)
2 = Direct in Termination (Night only)
3 = Direct in Termination (Day and Night)
4 = Direct Inward Dialing (DID)
5 = TAS 6 = Night ATT
7 = Remote Access to System
8-14 = Not used
15 = CAS Line connection (Satellite)
CHAPTER 4 NDA-24298 Page 404 Issue 1 ACFR : Assignment of Call Forwarding Restriction 4. Data Sheet TENANT NUMBER (TN)TRANSFER SERVICE FEATURE INDEX (TSFI) 1 – 15CALL CATEGORY INDEX (CCI) 0 – 15 0123456789101112131415 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
NDA-24298 CHAPTER 4 Page 405 Issue 1 ATNR : Assignment of Tenant Restriction Class Data ATNR: Assignment of Tenant Restriction Class Data 1. General This command assigns the tenant restriction data for each objective situation. 2. Precautions 1. Data can be entered on a Day/Night basis, if specified in ASYD command, SYS1, INDEX75, bit 2=1. 2. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX8. If data for this command is common for all tenants (ASYD command, SYS1, INDEX 94, bit0=1), assign TN parameter as data “1” for all tenants. 3.Table 4-9 provides the Tenant Restriction Index (TRI) data. Since the OBJECTIVE SITUATION indi- cated as “-” may not always be the “Not used” index, do not enter RES=1 for “-” to prevent unexpected effects. Table 4-9 TRI TRI OBJECTIVE SITUATION 0 Station within OGTN calls to a station within TMTN 1 Station within OGTN sets Call Forwarding-All Calls / Busy Line / Don’t Answer to a station within TMTN 2– 3Attendant Console within OGTN sets Call Forwarding-All Calls for a station within TMTN (Call Forwarding - All Calls set/Cancel by ATT) 4Station within OGTN call to an Attendant Console within TMTN by dialing individual ATT number assigned by the ASAT command 5 External Key within OGTN changes the Day/Night Mode of TMTN 6– 7 Incoming call of the trunk within OGTN terminates to a station within TMTN (In the case of MFC signaling only) 8 - 15–
CHAPTER 4 NDA-24298 Page 406 Issue 1 ATNR : Assignment of Tenant Restriction Class Data 3. Data Entry Instructions 1 2 3 4 5 6 7 8 9 101112131415 OGTN Enter the OGTN DAY/NIGHT MODE D/N TENANT RESTRICTION INDEX (TRI) 0-15ORIGINATING TENANT (OGTN) TERMINATING TENANT (TMTN) 0 1 2 3 4 DN D = Day Mode N = Night Mode TMTN Enter the TMTN 0 = Restricted 1 = AllowedRES TENANT RESTRICTION INDEX (TRI) See Table 4-9