Home > NEC > Communications System > NEC Neax 2400 Ipx Office Data Specification

NEC Neax 2400 Ipx Office Data Specification

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1020
    Add page 841 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 807
Issue 1
ACDD : Assignment of Change Digit Code for Dial in Service
ACDD: Assignment of Change Digit Code for Dial in Service 
1. General
This command assigns the Change Digit Code for the ISDN line with DID Addressing.
2. Precautions
1. Data can be entered on a Day/Night basis if specified in the ASYD command, SYS 1, INDEX 75, Bit 5=1.
2. This command does not affect DC = 0 (Sub Address - Addressing) assigned by the ARTD command.
3. Enter the B-Channel Route Number in the parameter RT. 
3. Data Entry Instructions
REMARKS
 DAY/NIGHT
     MODE
(DAY/NIGHT)
      D/N  ROUTE
NUMBER
    DIGIT CODE (DC)
 MAX. 7 DIGITS CHANGE DIGIT CODE (CDC)
          MAX.24 DIGITSADDITIONAL
   DIALING
       (AD)
         FORWARDING       DATA
       (XER)
        
DAY/NIGHT
D = Day
N = NightDC
Max.7 digits
Number of digits for this DC
must match the data in DC of
the ARTD command
RT
Enter the B-Channel Route Number
in the parameter RT.XFR
Always assign data 0 in XFR parameter
when ISDN DID Addressing is provided.
0 = Transfer is in service
1 = Transfer is out of serviceAD
Always assign data 0 in AD parameter when ISDN DID
Addressing.
0 = Additional Dialing Service is out of service.
1 = PBX dial-in Additional Dialing Service (Japan) is in service.
110
24113611
00
 (RT)
0/1  0/1
    Add page 842 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 808
Issue 1
ACDD : Assignment of Change Digit Code for Dial in Service
4. Data Sheet
DAY/ NIG HT  
MODE
 (DAY/NIGHT)
D/NROUTE 
NUMBER 
(RT)DIGIT CODE 
(DC)
 MAX. 7 DIGITSCHANGE DIGIT CODE 
(CDC)
 MAX. 24 DIGITSADDITIONAL 
DIALING
 (AD)
 0/1FORWARDING 
DATA
(XFR)
0/1REMARKS
    Add page 843 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 809
Issue 1
ACDD_LR : Assignment of Change Digit Code for Dial In Service – Logical Route Number
ACDD_LR: Assignment of Change Digit Code for Dial In Service – Logical 
Route Number
1. General
This command is used to assign the Change Digit Code for the ISDN line with DID Addressing. Route number
of the ACDD command can be assigned by using Logical Route.
2. Precautions
1. Prior to this command, logical route data must be allocated by using the ALRTN command.
2. Only when logging in to the NCN (Network Control Node), this command can be used to assign the
logical route data of self-Node and the other Nodes in the Fusion Network. If logging in to a LN (Local
Node), data setting only for the self-node is available. (Error message is indicated if you try to write the
data of other Node.)
3. Data can be entered on a Day/Night basis if specified in the ASYD command, SYS 1, INDEX 75, bit 5=1.
4. This command does not affect if DC = 0 (Sub Address - Addressing) is assigned by the ARTD command.
5. Enter the Logical Route Number of the B-channel route in the parameter “LGRT.”
3. Data Entry Instructions
TRANSFER
SERVICE
(XER) DAY/
NIGHT
MODE
(D/N)LOGICAL
ROUTE
NUMBER
(LGRT)
1-899FUSION
POINT
CODE
(FPC)
1-253EXTERNAL
ROUTE
NUMBER
(RT)DIGIT CODE
(DC)
 MAX. 7 DIGITS
[0-9, *, #] CHANGE DIGIT CODE 
(CDC)
MAX.24 DIGITS
[0-9, *, #, P]ADDITIONAL
DIALING
(AD)
         
D/N
• Day Mode
• Night ModeDC
Number of digit for this DC
must match the data in DC of
the ARTD command.
LGRT
Enter the Logical Route Number of the 
B-channel route.XFR
Always select “In Service” at XFR parameter
when ISDN DID Addressing is provided.
• In Service = Transfer is valid
• Out of Service = Transfer is invalid
AD
Always select “Out of Service” in AD parameter when ISDN DID Addressing.
• Out of Service = Additional Dialing Service is invalid
• In Service = PBX dial-in Additional Dialing Service (Japan) is valid
    Add page 844 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 810
Issue 1
ACDD_LR : Assignment of Change Digit Code for Dial In Service – Logical Route Number
4. Data Sheet
DAY/
NIGHT 
MODE
 (D/N)LOGICAL
ROUTE 
NUMBER 
(LGRT)
1-899FUSION
POINT
CODE
(FPC)
1-253EXTERNAL 
ROUTE 
NUMBER 
(RT)DIGIT CODE 
(DC)
 MAX. 7 DIGITS
[0-9, *, #]CHANGE DIGIT CODE 
(CDC)
 MAX. 24 DIGITS
[0-9, *, #, P]ADDI-
TIONAL 
DIALING
 (AD)TRANSFER
SERVICE
(XER)
    Add page 845 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 811
Issue 1
ACNP : Assignment of Calling Number Pattern
ACNP: Assignment of Calling Number Pattern
1. General
This command assigns the Calling Number Pattern (CNP) to the route that is used for the SID To Network-
Present service/for the Calling Party Recognition service. 
2. Precautions
1. Enter a B-Channel Route Number in the RT parameter.
2. The CNP is an intermediate parameter to assign the SID using the ACND command. 
3. Data Entry Instructions
    KING OF
CONNECTION
     (IC/OG)
        I/OCALLING NUMBER
       PATTERN
          (CNP)
          1-255ROUTE NUMBER
            (RT)REMARKS
RT
Enter the route number of the B-channelOG/IC
I = Incoming Call (Calling Party Recognition)
O = Outgoing Call (SID To Network-Present)CNP
Enter the arbitrary number within the range
between 1 and 255.
    Add page 846 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 812
Issue 1
ACNP : Assignment of Calling Number Pattern
4. Data Sheet
KIND OF
CONNECTION
(IC/OG)
I/OROUTE
NUMBER
(RT)CALLING
 NUMBER
PATTERN 
(CNP)
1 – 255REMARKS
    Add page 847 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 813
Issue 1
ACNPN : Assignment of Calling Number Pattern for NDM
ACNPN: Assignment of Calling Number Pattern for NDM
1. General
This command assigns the Calling Number Pattern (CNP) to the route which is used for the SID To Network-
Present service/for the Calling Party Recognition service. The data assigned by this command is written in
Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node
(LN).
2. Precautions
1. Enter a B-Channel Logical Route Number in the LGRT parameter.
2. The CNP parameter in this command corresponds to the one assigned by ACNDN command.
3. Assign the Calling Number Pattern (CNP) to Incoming Call and Outgoing Call each.
4. When the Calling Party Recognition is used in TAPI service, this command is to be assigned to the
incoming route of COT which receives the calling number information from Central Office (analog)
directly.
5. This command must be used in a pair with ACNDN command.
3. Data Entry Instructions
    KIND OF
CONNECTION
     (IC/OG)
        I/OCALLING NUMBER
       PATTERN
          (CNP)
          1-1023LOGICAL ROUTE
NUMBER
(LGRT)REMARKS
LGRT
Enter the logical route number of the B-channelIC/OG
I = Incoming Call (Calling Party Recognition)
O = Outgoing Call (SID To Network-Present)CNP
Enter the arbitrary number within the range
between 1 and 1023.
    Add page 848 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 814
Issue 1
ACNPN : Assignment of Calling Number Pattern for NDM
4. Data Sheet
KIND OF
CONNECTION
(IC/OG)
I/OLOGICAL
ROUTE
NUMBER
(LGRT)CALLING
 NUMBER
PATTERN 
(CNP)
1 – 1023REMARKS
    Add page 849 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 815
Issue 1
ACND : Assignment of Calling Number Data
ACND: Assignment of Calling Number Data
1. General
This command assigns the Service Identification Number (SID) sent to the ISDN for the SID To Network -
Present service for the Calling Party Recognition service.
2. Precautions
The CNP parameter corresponds to the one assigned by the ACNP command.
3. Data Entry Instructions
 CALLING
 NUMBER
PATTERN
   (CNP)
   0-255NUMBER OF DIGITS OF
    THE ADDITIONAL
           NUMBER
             (ADD)
              0-24SKIP DIGIT
    (SKIP)
     0-24REMARKS
SKIP
The number of skip digits from the SID.CNP
0 = OG ID Service
1-255 = Calling Number PatternADD
The number of the digits for the 
additional number.
  DIGIT CODE OF
THE ADDITIONAL
       NUMBER
           (DC)
  MAX. 24 DIGITS
DC
The SID sent to the ISDN
    Add page 850 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 816
Issue 1
ACND : Assignment of Calling Number Data
4. Data Sheet
CALLING
NUMBER
PATTERN 
(CNP)
0 - 255SKIP
DIGIT 
(SKIP)
0 - 24NUMBER OF
DIGITS OF THE
ADDITIONAL
NUMBER 
(ADD)
0 - 24DIGIT CODE OF THE
ADDITIONAL NUMBER 
(DC)
MAX. 24 DIGITSREMARKS
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Ipx Office Data Specification