NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 357 Issue 1 AISPN : Assignment of Incoming Selection Pattern Data for NDM 4. Data Sheet INCOMING SELECTION TRANSLATION PATTERN NUMBER (PNI) 1 – 15ADDITIONAL DIGIT INFORMATION (DC) MAXIMUM 4 DIGITSREMARKS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
CHAPTER 4 NDA-24298 Page 358 Issue 1 ARAC : Assignment of Remote Access Code ARAC: Assignment of Remote Access Code 1. General This command is used when the system provides the Remote Access to System service feature for a TIE line or DID line. 2. Precautions 1. The Remote Access to System service feature is activated when the access code (assigned at ACC parameter of this command) is called from a TIE line or a DID line. This command assignment is not required when the Ring Down method incoming route is applied to the Remote Access to System service feature. 2. The tenant number of the Incoming Trunk (ICTK) is assigned by the ATRK command. 3. The ACC should be assigned a unique number conformable to the station number (STN) assigned by the numbering plan data. 4. When the ASYD command, INDEX43, bit0=0 (Authorization Code required with Remote Access to System service feature) is assigned, the AATC/AMND command should also be assigned. In this case, the TN parameter of this command should correspond to the tenant number assigned by the AATC command. 5. To accomplish the Remote Access to System service feature, the following commands should also be assigned: ARTD command, FA = 1 ASTD command, STM = 4, SYS = 0, ST = 1 ACSI command ACFR command ARRC command
NDA-24298 CHAPTER 4 Page 359 Issue 1 ARAC : Assignment of Remote Access Code 3. Data Entry Instructions TENANT NUMBER IC TRUNK (ICTN) KIND OF R/M (RM) ACCESS CODE (ACC) MAXIMUM 5 DIGITSTENANT NUMBER FOR AUTHORIZATION CODE (TN)REMARKS TN Enter the tenant number assigned by the AATC command. ACC Enter an in dial number to begin the Remote Access to System service feature. ICTN Enter the tenant number assigned by the ATRK command. RM R = Remote Access Code M = Manual Roaming (Not used)
CHAPTER 4 NDA-24298 Page 360 Issue 1 ARAC : Assignment of Remote Access Code 4. Data Sheet TENANT NUMBER OF IC TRUNK (ICTN) ACCESS CODE (ACC) MAXIMUM 5 DIGITSKIND OF R/M (RM)TENANT NUMBER FOR AUTHORIZATION CODE (TN)REMARKS
NDA-24298 CHAPTER 4 Page 361 Issue 1 ARSC : Assignment of Route Restriction Class ARSC: Assignment of Route Restriction Class 1. General This command assigns route restriction information according to the Route Restriction Class (RSC) of the station and the Route Number (RT). 2. Precautions 1. Data can be entered on a Day/Night basis, if specified in ASYD command, SYS1, INDEX75, bit 0=1. 2. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX8. If data of this command is common for all tenants (ASYD command, SYS1, INDEX92, bit4=1), assign TN parameter as data “1” for all tenants. 3. The displayed Route Restriction Class (RSC) corresponds to the one assigned by the ASDT command. 4. The details of each RRI are as follows: 5. The restriction data (RES) is entered in the text box where RSC and RRI cross. 6. When RES=2 is assigned in RRI=3, ATDP/AARP (Toll Restriction 3/6 digits) should be assigned to specify the connection allowed area. 7. The parameter RES = “2” (Toll Restriction is allowed) is valid only when the parameter RRI = “3” (OG Restriction Directly) is assigned. RRI Descriptions RRI-0 Trunk incoming connection with an Attendant Console (or a station) assistance. RRI-1 Trunk incoming connection without assistance. RRI-2 Trunk outgoing connection with an Attendant Console (or a station) assistance. RRI-3Trunk outgoing connection without assistance. Note:For the dummy route, assign the data to RRI3 only.
CHAPTER 4 NDA-24298 Page 362 Issue 1 ARSC : Assignment of Route Restriction Class 3. Data Entry Instructions 1110 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RRI-0 RRI-1 RRI-2 RRI-3 0 = IC Restriction via ATT/STA 1 = IC Restriction Directly 2 = OG Restriction via ATT/STA 3 = OG Restriction Directly See Precaution (4) for more detailsRESTRICTION DATA (RES) is assigned in the squares where RRI and RT cross. When unassigned, RES for the corresponding item is recognized as “0” (Restriction Status). 0 = Restricted 1 = Connection is allowed 2 = Toll (Conditional) Restriction TN Enter the tenant number which affects this restriction table RT Enter the trunk route number assigned by the ARTD/ATRK commands. D/N D = Day mode N = Night mode DAY/NIGHT MODE (D/N) 1/2TENANT NUMBER (TN)ROUTE NUMBER (RT)ROUTE RESTRICTION INDEXROUTE RESTRICTION CLASS
NDA-24298 CHAPTER 4 Page 363 Issue 1 ARSC : Assignment of Route Restriction Class 4. Data Sheet DAY/NIGHT MODE D/NTENANT NUMBER (TN)ROUTE NUMBER (RT)ROUTE RESTRICTION INDEXROUTE RESTRICTION CLASS 01234567891011 12 13 14 15 RRI-0 RRI-1 RRI-2 RRI-3 RRI-0 RRI-1 RRI-2 RRI-3 RRI-0 RRI-1 RRI-2 RRI-3 RRI-0 RRI-1 RRI-2 RRI-3 RRI-0 RRI-1 RRI-2 RRI-3 RRI-0 RRI-1 RRI-2 RRI-3 RRI-0 RRI-1 RRI-2 RRI-3 RRI-0 RRI-1 RRI-2 RRI-3 RRI-0 RRI-1 RRI-2 RRI-3
CHAPTER 4 NDA-24298 Page 364 Issue 1 ARSCN : Assignment of Route Restriction Class for NDM ARSCN: Assignment of Route Restriction Class for NDM 1. General This command assigns route restriction information according to the Route Restriction Class (RSC) of the station and the Logical Route Number in the Fusion network. 2. Precautions 1. Data can be entered on a Day/Night basis, if specified in ASYDN command, SYS1, INDEX75, bit 0=1. 2. The applicable Tenant Number (TN) range is designated by the ASYDN command, SYS1, INDEX8. If data in this command is common for all tenants (ASYDN command, SYS1, INDEX800, bit6=1), assign the TN parameter as data “1” for all tenants. 3. The displayed Route Restriction Class (RSC) corresponds to the one assigned by the ASDT command. 4. The details of each RRI are as follows: 5. The restriction data (RES) is entered in the text box where RSC and RRI cross. 6. When RES = 2 is assigned in RRI = 3, ATDPN/AARPN (Toll Restriction 3/6 digits) should be assigned to specify the connection allowed area. 7. The parameter RES = “2” (Toll Restriction is allowed) is valid only when the parameter RRI = “3” (OG Restriction Directly) is assigned. RRI Descriptions RRI-0 Trunk incoming connection with an Attendant Console (or a station) assistance. RRI-1 Trunk incoming connection without assistance. RRI-2 Trunk outgoing connection with an Attendant Console (or a station) assistance. RRI-3Trunk outgoing connection without assistance. Note:For the dummy route, assign the data to RRI3 only.
NDA-24298 CHAPTER 4 Page 365 Issue 1 ARSCN : Assignment of Route Restriction Class for NDM 3. Data Entry Instructions 1110 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RRI-0 RRI-1 RRI-2 RRI-3 0 = IC Restriction via ATT/STA 1 = IC Restriction Directly 2 = OG Restriction via ATT/STA 3 = OG Restriction Directly See Precaution 4 for more details.RESTRICTION DATA (RES) is assigned in the squares where RRI and RT cross. When unassigned, RES for the corresponding item is recognized as 0 (Restriction Status). 0 = Restricted 1 = Connection is allowed 2 = Toll (Conditional) Restriction Note: RES=2 can be set only when PRI-3. TN RRI Enter the tenant number which affects this restriction table. LGRT Enter the unique Logical Route number in the Fusion network. D/N D = Day mode N = Night mode DAY/NIGHT MODE (D/N) D/NTENANT NUMBER (TN)LOGICAL ROUTE NUMBER (LGRT) 1-899ROUTE RESTRICTION INDEXROUTE RESTRICTION CLASS
CHAPTER 4 NDA-24298 Page 366 Issue 1 ARSCN : Assignment of Route Restriction Class for NDM 4. Data Sheet DAY/NIGHT MODE D/NTENANT NUMBER (TN)LOGICAL ROUTE NUMBER (LGRT) 1-899ROUTE RESTRICTION INDEXROUTE RESTRICTION CLASS 0123456789101112131415 RRI-0 RRI-1 RRI-2 RRI-3 RRI-0 RRI-1 RRI-2 RRI-3 RRI-0 RRI-1 RRI-2 RRI-3 RRI-0 RRI-1 RRI-2 RRI-3 RRI-0 RRI-1 RRI-2 RRI-3 RRI-0 RRI-1 RRI-2 RRI-3 RRI-0 RRI-1 RRI-2 RRI-3 RRI-0 RRI-1 RRI-2 RRI-3 RRI-0 RRI-1 RRI-2 RRI-3