NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 727 Issue 1 ASGD : Assignment of Special Group Data ASGD: Assignment of Special Group Data 1. General This command assigns the station number belonging to the special group which applies to the following service features: Off Hook Alarm Priority Call Do Not Disturb Room Cut Off 2. Precautions 1. The call destination of the special group is designated by the ASID command. 2. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. 3. Since the GN parameter is intermediate data to the ASID command, enter a unique number for each spe- cial group. 3. Data Entry Instructions 1 2 5 6 4 5 0 1 STATION NUMBER (STN)FUNCTION NUMBER (F) 0-7GROUP NUMBER (GN) 1-7REMARKS TENANT NUMBER (TN) F 0 = Off Hook Alarm 1 = Do Not Disturb (Only for Hotel System) 2 = Room Cut Off (Only for Hotel System) 3 = Not used 4 = Priority Call 1 5 = Priority Call 2 6 = Priority Call 3 7 = Not used GN Enter a unique GN for each special group. STN Enter the station number belonging to the special group.
CHAPTER 4 NDA-24298 Page 728 Issue 1 ASGD : Assignment of Special Group Data 4. Data Sheet TENANT NUMBER (TN) STATION NUMBER (STN)FUNCTION NUMBER (F) 0 – 7GROUP NUMBER (GN) 1 – 7REMARKS
NDA-24298 CHAPTER 4 Page 729 Issue 1 ASGD_T : Assignment of Special Group Data – Telephone Number ASGD_T : Assignment of Special Group Data – Telephone Number 1. General This command is used to assign the stations belong to the special group which applies to Off Hook Alarm, Priority Call, Do Not Disturb, and Room Cut Off services. The station data of ASGD can be assigned by using Telephone Number. 2. Precautions 1. Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the ALGSL command is not available in this command. 2. In case logging in to a LN, only the Telephone Numbers allocated to the stations within the logged-in node can be used in this command. Also, when logging in to the NCN, the data memory of the whole nodes in the network is to be written. 3. The call destination of the special group is designated by the ASID_T command. 4. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8. 5. Since the GN parameter is intermediate data to the ASID_T command, enter a unique number for each special group.
CHAPTER 4 NDA-24298 Page 730 Issue 1 ASGD_T : Assignment of Special Group Data – Telephone Number 3. Data Entry Instructions Note:The existing data can be readout by pressing “Get” button after UGN and TELN data is entered. USER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN) Max. 16 digitsFUNCTION NUMBER (F) 0-7GROUP NUMBER (GN) 1-7REMARKS TELN Enter the Telephone Number of the station which belongs to the special group. GN Enter a unique Group Number for each special group. F 4=Priority Call 1 5=Priority Call 2 6=Priority Call 3 7=Not used 0=Off Hook Alarm 1=Do Not Disturb (only for Hotel System) 2=Room Cut Off (only for Hotel System) 3=Not used
NDA-24298 CHAPTER 4 Page 731 Issue 1 ASGD_T : Assignment of Special Group Data – Telephone Number 4. Data Sheet TENANT NUMBER (TN)FUNCTION NUMBER (F) 0-7SPECIFIC TERMINATING GROUP NUMBER (GN) 1-7USER GROUP NUMBER (UGN)SPECIFIC TERMINATING EQUIPMENT REMARKS S/ASPECIAL TELEPHONE NUMBER (STELN) Max. 16 digits 1S A 2S A 3S A 4S A 5S A 6S A 7S A 1S A 2S A 3S A 4S A 5S A 6S A 7S A
CHAPTER 4 NDA-24298 Page 732 Issue 1 ASID : Assignment of Special Incoming ASID: Assignment of Special Incoming 1. General This command assigns the call destination of the following service features: Off Hook Alarm Attendant Night Transfer Priority Call Do not Disturb Room Cut Off 2. Precautions 1. The applicable stations to achieve the above service features are categorized as Special Group. The stations belonging to the Special Group are assigned by the ASGD command. 2. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. If data for this command is common for all tenants (ASYD command, SYS1, INDEX 94, bit7=1), assign TN parameter as data “1” for all tenants. 3. Do not enter S/A = A (Attendant Console), when F = 3 (Attendant Night Transfer) is entered. 4. The GN parameter should correspond to the one assigned by the ASGD command.
NDA-24298 CHAPTER 4 Page 733 Issue 1 ASID : Assignment of Special Incoming 3. Data Entry Instructions TENANT NUMBER (TN)SPECIAL STATION NUMBER (SSTN) SPECIFIC TERMINATING EQUIPMENT FUNCTION NUMBER (F) 0-7GROUP NUMBER (GN) 1-7STATION/ ATTCON (S/A) 1/2REMARKS S/A 1 = Station 2 = Attendant Console F 0 = Off Hook Alarm 1 = Do Not Disturb (for Hotel System) 2 = Room Cut Off (for Hotel System) 3 = Attendant Night Transfer 4 = Priority Call 1 5 = Priority Call 2 6 = Priority Call 3 7 = Not used SSTN Enter the destination station/Attendant Console numberGN Enter GN assigned by the ASGD command 1 2
CHAPTER 4 NDA-24298 Page 734 Issue 1 ASID : Assignment of Special Incoming 4. Data Sheet TENANT NUMBER (TN)FUNCTION NUMBER (F) 0 – 7GROUP NUMBER (GN) 1 – 7SPECIFIC TERMINATING EQUIPMENT REMARKS STATION/ AT T C O N S/ASPECIAL STATION NUMBER (SSTN) 1S A 2S A 3S A 4S A 5S A 6S A 7S A 1S A 2S A 3S A 4S A 5S A 6S A 7S A
NDA-24298 CHAPTER 4 Page 735 Issue 1 ASID_T : Assignment of Special Incoming – Telephone Number ASID_T : Assignment of Special Incoming – Telephone Number 1. General This command is used to assign the destination of a call from the station which belongs to the special group, such as Off Hook Alarm, Attendant Night Transfer, Priority Call, Do Not Disturb, and Room Cut Off services. The station data of ASID can be assigned by using Telephone Number. 2. Precautions 1. Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the ALGSL command is not available in this command. 2. In case logging in to a LN, only the Telephone Numbers allocated to the stations within the logged-in node can be used in this command. Also, when logging in to the NCN, the data memory of the whole nodes in the network is to be written. 3. The applicable stations to achieve the above service features are categorized as Special Group. The stations belong to the Special Group are assigned by the ASGD/ASGD_T command. 4. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8. 5. Do not enter S/A=A (Attendant Console), when F=3 (Attendant Night Transfer) is entered. 6. The GN parameter should correspond to the one assigned by the ASGD/ASGD_T command.
CHAPTER 4 NDA-24298 Page 736 Issue 1 ASID_T : Assignment of Special Incoming – Telephone Number 3. Data Entry Instructions Note:The existing data can be readout by pressing “Get” button after UGN and STELN data is entered. TENANT NUMBER (TN)FUNCTION NUMBER (F) 0-7SPECIFIC TERMINATING GROUP NUMBER (GN) 1-7SPECIAL TELEPHONE NUMBER (STELN) Max. 16 digits USER GROUP NUMBER (UGN)REMARKS F 0=Off Hook Alarm 1=Do Not Disturb (only for Hotel System) 2=Room Cut Off (only for Hotel System) 3=Attendant Night Transfer 4=Priority Call 1 5=Priority Call 2 6=Priority Call 3 7=Not used S A S 1 2 S/A S: Telephone Number (of the station) A: Attendant Console Enter the Telephone Number of the destination station.STELNEnter the Group Number assigned by the ASGD/ASGD_T command.GN S/A SPECIFIC TERMINATING EQUIPMENT