NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 277 Issue 1 ANNDL : Assignment of Necessary Digits Data for LDM 4. Data Sheet LOGICAL ROUTE NUMBER (LGRT)INCOMING/ OUTGOING CALL (IC/OG) I/ONUMBER OF NECESSARY DIGITS (NND) 1 – 24REMARKSLOGICAL ROUTE NUMBER (LGRT)INCOMING/ OUTGOING CALL (IC/OG) I/ONUMBER OF NECESSARY DIGITS (NND) 1 – 24REMARKS
CHAPTER 4 NDA-24298 Page 278 Issue 1 ASTP : Assignment of Signal Translation Pattern ASTP: Assignment of Signal Translation Pattern 1. General This command assigns the Incoming/Outgoing Selection Translation Pattern Number (PNI/PNO) for the incoming or outgoing trunk route. 2. Precautions 1. The PNI/PNO is an intermediate parameter to assign an additional number (and skip digits) by the AISP/ AOSP command. (a) When IC/OG = 1 (Incoming) is entered, the additional number is assigned by the AISP command. (b) When IC/OG = 2 (Outgoing) is entered, the additional number and skip digits are assigned by the AOSP command. 2. The transmit number translation of the OGC/OGCA method outgoing calls are done by ASTP/AOSP command. Since the additional number and skip digits can be assigned by the AOPR/AADC command for LCR/LCRS method, the ASTP/AOSP command may not be required. 3. The system processes ASTP/AISP commands prior to processing the numbering plan data. If the LCR access code is added to the received numbers by the ASTP/AISP command, the system processes the LCR related commands such as ASPA/AFRS /AOPR. 4. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8. Enter the tenant number this command affects. If data for this command is common for all tenants (ASYD command, SYS1, INDEX93, bit4,5=1), assign the TN parameter as data “1” for all tenants.
NDA-24298 CHAPTER 4 Page 279 Issue 1 ASTP : Assignment of Signal Translation Pattern 3. Data Entry Instructions PNI appears when IC/OG=I is entered. Enter any number with a range from 1 to 15. I=Incoming O=OutgoingPNI IC/OG KIND OF ASSIGNMENT (IC/OG) I/OTENANT NUMBER (TN)ROUTE NUMBER (RT)INCOMING SELECTION TRANSLATION PATTERN NUMBER (PNI) 1-15OUTGOING SELECTION TRANSLATION PATTERN NUMBER (PNO) 1-15 pnip PNO I1001 1 PNO is appeared when IC/OG=O is entered. Enter any number with a range from 1 to 15. PNO
CHAPTER 4 NDA-24298 Page 280 Issue 1 ASTP : Assignment of Signal Translation Pattern 4. Data Sheet (a) Incoming KIND OF ASSIGNMENT (IC/OG) 1/2TENANT NUMBER (TN)ROUTE NUMBER (RT)INCOMING SELECTION TRANSLATION PAT T E R N NUMBER (PNI) 1 – 15REMARKS 1
NDA-24298 CHAPTER 4 Page 281 Issue 1 ASTP : Assignment of Signal Translation Pattern (b) Outgoing KIND OF ASSIGNMENT (IC/OG) 1/2TENANT NUMBER (TN)ROUTE NUMBER (RT)OUTGOING SELECTION TRANSLATION PAT T E R N NUMBER (PNO) 1 – 15REMARKS 2
CHAPTER 4 NDA-24298 Page 282 Issue 1 ASTPL : Assignment of Signal Translation Pattern for LDM ASTPL: Assignment of Signal Translation Pattern for LDM 1. General This command assigns the Incoming/Outgoing Selection Translation Pattern Number (PNI/PNO) for incoming or outgoing trunk route. This data is written in Local Data Memory (LDM). 2. Precautions 1. The PNI/PNO is an intermediate parameter to assign additional number (and skip digits) by the AISPL/ AOSPL command. (a) When IC/OG=I (Incoming) is entered, the additional number is assigned by the AISPL command. (b) When IC/OG=O (Outgoing) is entered, the additional number and skip digits are assigned by the AOSPL command. 2. The transmit number translation of the OGC/OGCA method outgoing calls are done by ASTPL/AOSPL command. Since the additional number and skip digits can be assigned by the AOPRL /AADCL command for LCR/LCRS method, the ASTPL/AOSPL command may not be required. 3. The system processes ASTPL/AISPL command prior to the numbering plan data. Thus, if the LCR access code is added to the received numbers by the ASTPL/AISPL command, the system processes the LCR related command such as ASPAL/AFRSL /AOPRL. 4. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX8. Enter the tenant number in which this command effects. If data of this command is common for all tenants (ASYDL command, SYS1, INDEX800, bit4,5=1), assign TN parameter as data “1” for all tenants. 3. Data Entry Instructions PNI appears when IC/OG=I is entered. Enter any number with a range from 1 to 15. I=Incoming O=OutgoingPNI IC/OG KIND OF ASSIGNMENT (IC/OG) I/OTENANT NUMBER (TN) 1-63LOGICAL ROUTE NUMBER (LGRT) 1-899INCOMING SELECTION TRANSLATION PATTERN NUMBER (PNI) 1-15OUTGOING SELECTION TRANSLATION PATTERN NUMBER (PNO) 1-15 pnip PNO I1001 1 PNO appears when IC/OG=O is entered. Enter any number with a range from 1 to 15. PNO
NDA-24298 CHAPTER 4 Page 283 Issue 1 ASTPL : Assignment of Signal Translation Pattern for LDM 4. Data Sheet (a) Incoming KIND OF ASSIGNMENT (IC/OG) I/OTENANT NUMBER (TN)LOGICAL ROUTE NUMBER (LGRT) 1-899INCOMING SELECTION TRANSLATION PAT T E R N NUMBER (PNI) 1 – 15REMARKS I
CHAPTER 4 NDA-24298 Page 284 Issue 1 ASTPL : Assignment of Signal Translation Pattern for LDM (b) Outgoing KIND OF ASSIGNMENT (IC/OG) I/OTENANT NUMBER (TN)LOGICAL ROUTE NUMBER (LGRT) 1-899OUTGOING SELECTION TRANSLATION PAT T E R N NUMBER (PNO) 1 – 15REMARKS O
NDA-24298 CHAPTER 4 Page 285 Issue 1 ASTPN : Assignment of Signal Translation Pattern for NDM ASTPN: Assignment of Signal Translation Pattern for NDM 1. General This command assigns the Incoming/Outgoing Selection Translation Pattern Number (PNI/PNO) for incoming or outgoing trunk route in Fusion Network. The data assigned by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN). 2. Precautions 1. The PNI/PNO is an intermediate parameter to assign additional number (and skip digits) by the AISPN/ AOSPN command. (a) When IC/OG=I (Incoming) is entered, the additional number is assigned by the AISPN command. (b) When IC/OG=O (Outgoing) is entered, the additional number and skip digits are assigned by the AOSPN command. 2. The transmit number translation of the OGC/OGCA method outgoing calls are done by ASTPN/AOSPN command. Since the additional number and skip digits can be assigned by the AOPRN /AADCN command for LCR/LCRS method, the ASTPN/AOSPN command may not be required. 3. The system processes ASTPN/AISPN command prior to the numbering plan data. Thus, if the LCR access code is added to the received numbers by the ASTPN/AISPN command, the system processes the LCR related command such as ASPAN/AFRSN /AOPRN. 4. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX8. Enter the tenant number in which this command effects. If data of this command is common for all tenants (ASYDN command, SYS1, INDEX800, bit4,5=1), assign TN parameter as data “1” for all tenants.
CHAPTER 4 NDA-24298 Page 286 Issue 1 ASTPN : Assignment of Signal Translation Pattern for NDM 3. Data Entry Instructions PNI appears when IC/OG=I is entered. Enter any number with a range from 1 to 15. I=Incoming O=OutgoingPNI IC/OG KIND OF ASSIGNMENT (IC/OG) I/OTENANT NUMBER (TN)LOGICAL ROUTE NUMBER (LGRT) 1-899INCOMING SELECTION TRANSLATION PATTERN NUMBER (PNI) 1-15OUTGOING SELECTION TRANSLATION PATTERN NUMBER (PNO) 1-15 pnip PNO I1001 1 PNO appears when IC/OG=O is entered. Enter any number with a range from 1 to 15. PNO