Home > NEC > Communications System > NEC Neax 2400 Ipx Office Data Specification

NEC Neax 2400 Ipx Office Data Specification

    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1020
    							NDA-24298 CHAPTER 2
     Page 17
    Issue 1
    ASSIGNMENT
    5. IPX MAT Commands
    The IPX MAT’s operation is very similar to that of the NEAX2400 MS-DOS MAT, so you will find that many
    of the key stroke operations have been carried over into IPX MAT. In addition, some standard MS Windows
    operations and key strokes are used. Use the following keys, or in some instances the mouse, to select or enter
    data.
    6. Configuring IPX MAT
    This section explains the PBX Alias parameters you may configure using the PBX Administration dialog
    window. It also lists the default values of NEAX-IPX, the default PBX Alias delivered with the IPX MAT
    software. Prior to running the IPX MAT, you should either define a new PBX Alias, configure the default PBX
    to work with your system, or plan to use the NEAX-IPX default Alias. NEAX-IPX is ready for use once the IPX
    MAT software has been successfully installed. Table 2-3 lists the default values displayed in the PBX
    Administration dialog box when you select NEAX-IPX as your PBX Alias.
    Table 2-2 IPX MAT Commands
    Enter and TabThis key has two functions:
    Writes the data to the IPX MAT memory and moves the cursor to the next text control 
    on the dialog window.
    Y (y) Enter Y in the WRT? text control to write the data to the IPX.
    N (n) Enter N in the WRT? text control if you do not want to write the data to the IPX.
    Delete Deletes the selected characters in a text control.
    Backspace Deletes the character immediately to the left of the cursor in a text control.
    Right Arrow  Moves the cursor to the right in the text control.
    Left Arrow Moves the cursor to the left in the text control.
    Up Arrow Moves the cursor to the left in the text control.
    Down Arrow Moves the cursor to the right in the text control.
    Alt + F4 Closes the screen without saving the changes.
    Shift + Enter and Shift + Tab Moves the cursor from a text control to the previous text control.
    Ctrl + C Copies selected text to Windows Clipboard.
    Ctrl + V Pastes Windows Clipboard contents at the current cursor position.
    Ctrl + Home 
    (When viewing the log file).Moves the cursor to the top of the log data file.
    Ctrl + End 
    (When viewing the log file).Moves the cursor to the bottom of the log data file.
    Page Up
    (When viewing the log file).Moves the log file up one page at a time.
    Page Down 
    (When viewing the log file).Moves the log file down one page at a time.
    ? or F1 Displays the Help text. 
    						
    							CHAPTER 2 NDA-24298
    Page 18
    Issue 1
    ASSIGNMENT
    6.1 Serial/Direct Connection
    The following steps explain how to configure the PBX Alias for a serial/direct connection using the
    recommended default data.
    Note 1:The PBX Alias cannot have spaces in the name.
    Note 2:You can use other data when configuring IPX MAT. However, it is recommended that you use the default
    data as previously described when configuring a new PBX Alias.
    Table 2-3 PBX Administration Default Values
    PBX Alias NEAX-IPX
    Connection Type Serial/Direct
    FPC 1
    Connect 120000
    Response Timeout 120000
    Pacing Timer 10000
    Link Data Log Path blank
    COM Port COM 1
    Baud Rate 4800
    Ignore CTR blank
    Ignore DSR blank
    Modem Name blank
    Phone Number blank
    Host Name blank
    IP Address 172.16.253.0
    TCP Port 60000
    Inter-App Resource blank 
    						
    							NDA-24298 CHAPTER 2
     Page 19
    Issue 1
    ASSIGNMENT
    1. From the PBX menu, select Configuration to open the PBX Administration dialog box.
    Figure 2-20   PBX Administration
    2. Enter a name for the PBX Alias in the PBX Alias box.
    Note:You can also define a PBX Alias by selecting the default NEXT-IPX or by modifying any other previously
    defined Alias from the list in the PBX Alias box. If you select a PBX Alias from the list, its related
    information displays in the additional fields on this dialog box. You can enter information in the Connect
    Timeout, Response Timeout, Pacing Timer, and Link Data Log Path fields if necessary. However, the IPX
    MAT software will run without changing the default data.
    3. Select Serial/Direct as the Connection Type.
    4. Enter the appropriate FPC (Fusion Link Point Code). 1 is the default value and should be used initially
    for all new IPX systems. In a Fusion Network, this setting must match the FPC value entered into
    System Data SYS 1 INDEX 512.
    5. Enter 120000 in the Connection Timeout text box.
    6. Enter 120000 in the Response Timeout text box.
    7. Enter 10000 in the Pacing Timer text box.
    8. Clear (Remove) any text from the Link Data Log Path text control.
    9. Set COM1 Baud rate to 4800. This is the default PBX value on the initial power up.
    10. Leave the Host Name text box blank.
    11. Leave the IP Address text box blank. 
    						
    							CHAPTER 2 NDA-24298
    Page 20
    Issue 1
    ASSIGNMENT
    12. Leave the IP Port text box blank.
    13. Leave the Inter-App Resource text box blank.
    14. Click Add to write the data.
    15. Click Close.
    Note:The PBX Administration dialog box changes adapting to EX-FCCS Network. Enter the Fusion Group
    Number (FUG) which the PBX to be logged-in belongs. “Connection Timeout”, “Response Timeout”, and
    “Pacing Timer” text box is not provided. Others are the same as previous one. The PBX dialog box is as
    shown below.
    6.2 TCP/IP Connection
    This section explains how to add or modify a PBX Alias in IPX MAT when it is connected to a PBX using
    a TCP/IP connection through a Local Area Network (LAN).
    Procedure Overview
    1. Modify or add a PBX Alias.
    2. Assign the network information in Windows.
    3. Start the PBX system.
    4. Log in to IPX MAT.
    5. Assign the system data.
    6. Set up the IPX MAT file operations for logging purposes.
    PBX Administration 
    Add Add
    Modify Modify
    Clear
    Close
    PBX Alias
    Connection Type
    FUG
    COM PortBaud Rate
    Modem NamePhone Number
    Host Name
    IP Address TCP Port
    TCP/IP Settings
    Serial SettingsTCP/IP
    bsc7200
    10.41.207.207 60000
    3
    FPC
    1
    Delete
    TCP-IP134 
    						
    							NDA-24298 CHAPTER 2
     Page 21
    Issue 1
    ASSIGNMENT
    Note:
    If your IPX is to reside on your existing LAN, you will need to obtain an available IP address from your
    System Administrator before you configure the PBX Alias.
    6.2.1 Modifying or Adding a PBX Alias
    Note:
    The PBX Alias cannot have spaces in its name.
    The following steps explain how to create a PBX Alias in IPX MAT. 
    1. From the PBX menu, select Configuration to open the PBX Administration dialog box.
    2. Enter a name for the PBX Alias in the PBX Alias box.
    Note:You can also define a PBX Alias by selecting the default NEXT-PBX or by modifying any other previously
    defined Alias from the list in the PBX Alias box. If you select a PBX Alias from the list, its related
    information displays in the additional fields on this dialog box. You can enter information in the Connect
    Timeout, Response Timeout, Pacing Timer, and Link Data Log Path fields if necessary.
    3. Select TCP/IP as the Connection Type.
    4. Enter the appropriate FPC (Fusion Link Point Code). 1 is the default value and should be used
    initially for all new IPX systems. In a Fusion Network, this setting must follow the FPC value
    entered into System Data SYS 1 INDEX 512.
    5. Enter 120000 in the Connection Timeout text box.
    6. Enter 120000 in the Response Timeout text box.
    7. Enter 10000 in the Pacing Timer text box.
    8. Leave the Link Data Log Path text box blank.
    9. Enter the name of the host your system is using in the Host Name text box.
    10. Enter 172.16.253.0 in the IP Address text box, or enter the IP Address supplied by your network
    administrator.
    11. Enter 60000 in the IP Port text box.
    12. Leave the Inter-App Resource text box blank.
    13. Click Add to write the data.
    14. Click Close.
    15. Exit IPX MAT.
    6.2.2 Assigning Network Information in Windows
    Before you can run the IPX MAT software, you have to configure your network information in the
    Windows operating system. For information on configuring network information, see the Network
    Circuit Card Installation Manual or talk to your network administrator. After configuring the network
    information, you must restart the PC before you can log in to the IPX via the IPX MAT TCP/IP
    connection. 
    						
    							CHAPTER 2 NDA-24298
    Page 22
    Issue 1
    ASSIGNMENT
    6.2.3 Starting the PBX System
    Before you can log in to the PBX with your IPX MAT, you must start the PBX system. To start the PBX
    system, please see the NEAX2400 IPX Installation Manual.
    If you start up the system when the PBX is in DM Clear Restart mode, (the SENSE Switch is set to the
    default value “1”), you must verify that the IPX MAT baud rate is set to 4800 to ensure that the system
    runs properly.
    6.2.4 Logging in to IPX
    After you have defined the PBX Alias in IPX MAT and the TCP/IP network connection in Windows,
    you are ready to Log in to IPX. The Login operation allows you to select the target IPX (node) with
    which you are attempting to communicate. Once you log in to IPX, you may assign or delete office data,
    monitor the status of IPX, obtain System Messages through the IPX’s self-diagnosis function, and
    monitor the IPX traffic and Peg count data. Once you have completed the tasks you intended to perform,
    you should log out to prevent accidental changes to the data. The following steps explain how to log in
    to IPX. 
    Note:The maximum number of concurrent connections for the IPX is four.
    1. From the IPX menu, select Log In.
    2. Select the PBX you want to connect to by choosing the appropriate PBX Alias from the PBX Alias
    box.
    Note:When the User ID data is programmed in AUIDN command after the required office data assignment, enter
    the proper user name and password to login to the NCN (Network Control Node) or each LN (Local Node)
    in Fusion Network system. For the stand-alone system, User ID information for logging in to the PBX is
    programmed in AUIDL command. Only the User ID in LDM data is effective in stand-alone system. Refer
    to the AUIDN or AUIDL command in Chapter 4 for more detail explanations.
    3. Click Login.
    4. A successful log in displays the successful Login message box.
    Note:If the Login message box does not display, the login process has failed. If the login process fails, you should
    reopen the PBX Configuration dialog box and verify the PBX Alias configuration information. If the PBX
    Alias has been correctly configured, you should then test the physical connections to the PBX.
    5. Click OK on the Login message box. 
    						
    							NDA-24298 CHAPTER 2
     Page 23
    Issue 1
    ASSIGNMENT
    6.2.5 Assigning System Data
    This section explains how to assign the IP Address and the SubNet Mask using the default IP Address
    172.16.253.0 and the default SubNet Mask 00.00.00.00. Both fields must be entered using their
    hexadecimal equivalents.
    Note:You may find it convenient to use the Calculator in the Windows Accessories to find the hexadecimal
    equivalent of the IP Address and the SubNet Mask. To convert from decimal to hexadecimal:
    1. Select Calculator from the Accessories menu.
    2. From the View menu, select Scientific.
    3. Verify that Dec is selected.
    4. Click the first three numbers of the IP Address on the Calculator key pad.
    5. Select Hex.
    6. The hexadecimal equivalent of the first three numbers of the IP Address display.
    7. To perform additional decimal to hexadecimal conversions, make sure that Dec is selected 
    and repeat the previous steps.
    1. Type ASYDL in the Run Command text box.
    2. Press Enter.
    3. Type 1 in the SYS text box and press Enter.
    4. Type 513 in the INDEX text box and press Enter.
    5. Type 01H in the DATA text box and press Enter.
    6. Type Y in the WRT? text box and press Enter.
    7. Type 1 in the SYS text box and press Enter.
    8. Type 514 in the INDEX text box and press Enter.
    9. Type 01H in the DATA text box and press Enter.
    10. Type Y in the WRT? text box and press Enter.
    Note:The following steps explain how to assign the default IP Address.
    11. Type 1 in the SYS text box and press Enter.
    12. Type 515 in the INDEX text box and press Enter.
    13. Type AC (hexadecimal equivalent of 172) in the DATA text box and press Enter.
    14. Type Y in the WRT? text box and press Enter.
    15. Type 1 in the SYS text box and press Enter. 
    						
    							CHAPTER 2 NDA-24298
    Page 24
    Issue 1
    ASSIGNMENT
    16. Type 516 in the INDEX text box and press Enter.
    17. Type 10 (hexadecimal equivalent of 16) in the DATA text box and press Enter.
    18. Type Y in the WRT? text box and press Enter.
    19. Type 1 in the SYS text box and press Enter.
    20. Type 517 in the INDEX text box and press Enter.
    21. Type FD (hexadecimal equivalent of 253) in the DATA text box and press Enter.
    22. Type Y in the WRT? text box and press Enter.
    23. Type 1 in the SYS text box and press Enter.
    24. Type 518 in the INDEX text box and press Enter.
    25. Type 0 (hexadecimal equivalent of 0) in the DATA text box and press Enter.
    26. Type Y in the WRT? text box and press Enter.
    Note:The following steps explain how to assign the default SubNet Mask.
    27. Type 1 in the SYS text box and press Enter.
    28. Type 519 in the INDEX text box and press Enter.
    29. Type FF in the DATA text box and press Enter.
    30. Type Y in the WRT? text box and press Enter.
    31. Type 1 in the SYS text box and press Enter.
    32. Type 520 in the INDEX text box and press Enter.
    33. Type FF in the DATA text box and press Enter.
    34. Type Y in the WRT? text box and press Enter.
    35. Type 1 in the SYS text box and press Enter.
    36. Type 521 in the INDEX text box and press Enter.
    37. Type 00 in the DATA text box and press Enter.
    38. Type Y in the WRT? text box and press Enter.
    39. Type 1 in the SYS text box and press Enter.
    40. Type 522 in the INDEX text box and press Enter.
    41. Type 00 in the DATA text box and press Enter.
    42. Type Y in the WRT? text box and press Enter. 
    						
    							NDA-24298 CHAPTER 2
     Page 25
    Issue 1
    ASSIGNMENT
    6.2.6 IPX MAT File Operations
    The IPX MAT creates three types of files; Command Log files, Office Data Backup files, and List-up
    Command Report data tables. Command Log files and List-up Command Report data tables are the only
    files a user needs to view. The Office Data Backup files are used strictly for saving and storing the PBX
    Office Data.
    6.2.6.1 Office Data Backup
    It is always a good idea to routinely backup the data from the IPX memory to its internal hard disk. This
    data should then be saved from the IPX internal hard disk to the IPX MAT hard disk to ensure that no
    data is lost.
    Once the data has been saved from the IPX internal hard disk to the IPX MAT’s hard disk, you can use
    standard operating functions to copy the saved data to floppy disks, zip drive disks, writable CD-ROM
    drives, or any other type of external storage devices supported by the operating system. Doing a three
    phase backup (save) ensures the IPX Office data is safe and always available for restoration in case of
    an IPX data memory loss, hard disk failure, or any other IPX-related catastrophic failure that requires
    data memory to be reloaded.
    MEM_HDD and HDD_MAT are the two commands used for this three-phase backup. Once the data is
    saved to the IPX MAT, you can use Explorer to copy the appropriate files to the external mass storage
    device. To use Explorer, you must first determine where the IPX MAT copy of the numerous IPX Office
    Data backup files resides.
    As an example, assume the default drive and directory C:\IMXMAT were used when IPX MAT was
    installed. Also assume that a PBX Alias was configured using the PBX Configuration dialog and
    assigned the PBX Alias name MY_PBX.
    The IPX MAT always uses the same data directory structure when backing up data from the IPX. It
    creates a sub-directory under the IPX MAT home directory called DATA. Under the DATA directory
    another sub-directory using the PBX Alias name is created. In our example, this sub-directory is named
    MY_PBX. Under the PBX Alias directory, another sub-directory is created. The name of this directory
    is BACKUP. This directory structure always holds true. The only variables are the name of the IPX MAT
    home directory (default C:\IMXMAT) and the PBX Alias directory (in our example, MY_PBX). The
    complete directory structure for our example is as follows: C:\IMXMAT\DATA\MY_PBX\BACKUP.
    The bottom sub-directory (BACKUP) contains all files that have been backed up from the IPX using the
    HDD_MAT command.
    To save these files to an external storage device, open Explorer, navigate to the appropriate backup
    directory (C:\IMXMAT\DATA\MY_PBX\BACKUP) and select ALL files and/or sub-directories and
    copy them to your external device. You now have a safe backup of your IPX data memory that can be
    stored at an offsite location. 
    						
    							CHAPTER 2 NDA-24298
    Page 26
    Issue 1
    ASSIGNMENT
    6.2.6.2 MEM_HDD
    The following steps explain how to perform the backup and restore of PBX data to the PBX hard drive.
    1. Enter MEM_HDD in the Run Command field on the IPX MAT main menu.
    2. Press Enter.
    3. The Backup and Restore dialog box displays.
    4. Select Memory to Hard Disk in the Direction Select list.
    5. Select Data Memory in the Data Type Selection list.
    6. Select Auto Verify if you want to verify the data. This is an optional step.
    7. Click Start.
    Once you have made the appropriate selections and clicked Start, you can scroll down and view the data
    being saved in the Processing Status Log window. This section of the window is divided into the sections
    Action/Information, Direction, Data Type, and Time Stamp. The Action/Information column shows the
    Action being taken (saving or restoring), or the Information being saved. The Direction column shows
    where the data is being saved or restored (in this case, memory to PBX Hard Disk). The Data Type
    column shows the type of data you selected in the Data Type Selection list. The Time Stamp column
    shows the day, month, year, hour, minute, and second the data was backed up or restored.
    6.2.6.3 HDD_MAT
    The following steps explain how to backup and restore PBX data to the IPX MAT hard disk.
    1. Enter HDD_MAT in the Run Command field on the IPX MAT main menu.
    2. Press Enter.
    3. The Backup and Restore dialog box displays.
    4. Select PBX Hard Disk to MAT in the Direction Select list.
    5. Select Data Memory in the Data Type Selection list.
    6. Select Auto Verify if you want to verify the data. This is an optional step.
    7. Click Start.
    Once you have made the appropriate selections and clicked Start, you can scroll down and view the data
    being saved in the Processing Status Log window. This section of the window is divided into the sections
    Action/Information, Direction, Data Type, and Time Stamp. The Action/Information column shows the
    Action being taken (saving or restoring), or the Information being saved. The Direction column shows
    where the data is being saved or restored (in this case PBX Hard Disk to IPX MAT). The Data Type
    column shows the type of data you selected in the Data Type Selection list. The Time Stamp column
    shows the day, month, year, hour, minute, and second the data was backed up or restored. 
    						
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Ipx Office Data Specification