NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4
Page 787
Issue 1
ASPD : Assignment of Speed Calling
3. Data Entry Instructions
4. Data Sheet
TENANT
NUMBER
(TN) ABBREVIATED
DIGIT CODE
(ADC)
MAX. 4 DIGITSTELEPHONE NUMBER
(CD)
MAXIMUM 24
DIGITSREMARKS
NUMBER
(TN)TENANT ABBREVIATED
DIGITS (ADC)
MAXIMUM 4 DIGITSTELEPHONE NUMBER
(CD)
MUXIMUM 24 DIGITSREMARKS
ADC
Enter an abbreviated digits code.
Enter desired speed calling number.CD
CHAPTER 4 NDA-24298
Page 788
Issue 1
AATC : Assignment of Authorization Code Data
AATC: Assignment of Authorization Code Data
1. General
This command assigns the Authorization Code that is used for Authorization Code/Forced Account Code/Pad
Lock, and Remote Access to system features.
2. Precautions
1. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. If
data for this command is common for all tenants (ASYD command, SYS1, INDEX 94, bit3=1), assign TN
parameter as data “1” for all tenants.
2. When data “1 (Restricted)” is entered in the ACR parameter, the RSC and SFC parameter is specified as
the temporary class. The trunk connection or service feature capability of the temporary class is referred
to by the data of the ARSC command and the ASFC command.
3. When data “2 (Allowed)” is entered in the ACR parameter, neither the RSC nor SFC parameter appears.
In this case, the trunk connection or service feature is allowed regardless of the ARSC /ASFC data.
4. A maximum of 10 digits of DC can be entered as the Authorization Code.
5. Assign data “0” (Separate) in bit 6, INDEX93, SYS1 of the ASYD command to specify the maximum
number of digits for the command AMND.
6. Check sum (2 digits) for the Authorization Code can be arranged by the data assignment in INDEX 12,
13, and 14 of the ASYD command.
3. Data Entry Instructions
NUMBER
(TN)TENANTDIGIT CODE OF ID (DC)
MAXIMUM 10 DIGITS AUTHORIZATION
CODE
RESTRICTION
(ACR) 1/2 ROUTE
RESTRICTION
CLASS (RSC)
0-15 SERVICE
FEATURE
CLASS
(SFC)
0-15REMARKS
ACR
1 = Restricted
2 = Allowed
1
2
These parameters dont need to be entered
when parameter Authorization Code
restriction is 2.
NDA-24298 CHAPTER 4 Page 789 Issue 1 AATC : Assignment of Authorization Code Data 4. Data Sheet (a) When SFC and RSC are assigned for each Authorization Code (ACR = 1) TENANT NUMBER (TN) AUTHORIZATION CODE (DC) MAXIMUM 10 DIGITSAUTHORIZATION CODE RESTRICTION (ACR) 1/2ROUTE RESTRICTION CLASS (RSC) 0 – 15SERVICE FEATURE CLASS (SFC) 0 – 15REMARKS 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
CHAPTER 4 NDA-24298 Page 790 Issue 1 AATC : Assignment of Authorization Code Data (b) When SFC and RSC are not assigned for each Authorization Code (ACR = 2) TENANT NUMBER (TN)AUTHORIZATION CODE (DC) MAXIMUM 10 DIGITS AUTHORIZATION CODE RESTRICTION (ACR) 1/2REMARKS 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
NDA-24298 CHAPTER 4
Page 791
Issue 1
ACFO : Assignment of Call Forwarding Data
ACFO: Assignment of Call Forwarding Data
1. General
This command assigns various call forwarding service data on a tenant basis. The destinations of forwarded calls
can be the attendant console, a station, or an outside party.
2. Precautions
1. The parameter ADC displays only when designating 4 in the CF parameter. The Abbreviated Digit Codes
(ADC) and the speed dial number are assigned by the ASPD command.
2. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. If
data for this command is common for all tenants (ASYD command, SYS1, INDEX 93, bit1=1), assign TN
parameter as data “1” for all tenants.
3. Data Entry Instructions
NUMBER
(TN)TENANT
REMARKSCALL FORWARDING SERVICE
(CF)
CALL FORWARDING
DESTINATION
AND STATION NUMBER
(CFI)
1/2(STN)ABBREVIATED DIGIT CODE
(ADC)
MAX. 4 DIGITS
CFI
CF
ADCSTN
1 = Attendant Console
2 = StationThe STN parameter appears when data is
entered in the CFI parameter.
1 = C.F. - Busy Line
2 = C.F. - Dont Answer
3 = C.F. - Intercept
4 = Night Connection OutsideThe parameter ADC is displayed when data 4
is entered in the CF parameter.
1-4
1
2
3
4
CHAPTER 4 NDA-24298 Page 792 Issue 1 ACFO : Assignment of Call Forwarding Data 4. Data Sheet TENANT NUMBER (TN)CALL FORWARDING SERVICECALL FORWARDING DESTINATION AND STATION NUMBERABBREVIATED DIGIT CODE (ADC) 4 DIGITSREMARKS TYPE OF C.F. SERVICE(CF) 1 – 4(CFI) 1/2(STN) C.F. – Busy Line 1 C.F. – Don’t Answer 2 C.F. – Intercept 3 Night Connection Outside 4 C.F. – Busy Line 1 C.F. – Don’t Answer 2 C.F. – Intercept 3 Night Connection Outside 4 C.F. – Busy Line 1 C.F. – Don’t Answer 2 C.F. – Intercept 3 Night Connection Outside 4 C.F. – Busy Line 1 C.F. – Don’t Answer 2 C.F. – Intercept 3 Night Connection Outside 4 C.F. – Busy Line 1 C.F. – Don’t Answer 2 C.F. – Intercept 3 Night Connection Outside 4 C.F. – Busy Line 1 C.F. – Don’t Answer 2 C.F. – Intercept 3 Night Connection Outside 4 C.F. – Busy Line 1 C.F. – Don’t Answer 2 C.F. – Intercept 3 Night Connection Outside 4
NDA-24298 CHAPTER 4 Page 793 Issue 1 ACFO_T : Assignment of Call Forwarding Data – Telephone Number ACFO_T : Assignment of Call Forwarding Data – Telephone Number 1. General This command is used to assign various call forwarding service data on a tenant basis. The destinations of forwarded calls can be the attendant console, a station, or an outside party. The station data of ACFO command can be assigned by using Telephone Number instead. 2. Precautions 1. Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the ALGSL command is not available in this command. 2. In case logging in to a LN, only the Telephone Numbers allocated to the stations within the logged-in node can be used in this command. Also, when logging in to the NCN, the data memory of the whole nodes in the network is to be written. 3. The parameter ADC is required only when “Night Connection Outside” is selected in “CF” parameter. The Abbreviated Digit Codes (ADC) and the speed dial number are assigned by the ASPD command. 4. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8. 3. Data Entry Instructions TENANT NUMBER (TN)CALL FORWARDING SERVICE (CF)TELEPHONE NUMBER (TELN) Max. 16 digitsABBREVIATE DIGIT CODE (ADC) Max. 4 digits ADC Enter the ADC to the forwarded station when CF = Night Connection Outside is selected. CFI ATT: Forwarded to Attendant Console TELN: Forwarded to Station CF Select the type of call forwarding service. Call Forwarding – Busy Line Call Forwarding – Dont Answer Call Forwarding – Intercept Night Connection Outside TELN Enter the Telephone Number of destination station to which the call is forwarded. This parameter appears when TELN is selected in CFI parameter. (CFI)CALL FORWARDING DESTINATION (UGN)
CHAPTER 4 NDA-24298 Page 794 Issue 1 ACFO_T : Assignment of Call Forwarding Data – Telephone Number 4. Data Sheet TENANT NUMBER (TN)CALL FORWARDING SERVICE (CF)CALL FORWARDING DESTINATION ABBREVIATE DIGIT CODE (ADC) Max. 4 digits (CFI) (UGN)TELEPHONE NUMBER (TELN) Max. 16 digits C.F. - Busy Line C.F. - Don’t Answer C.F. - Intercept Night Connection Outside C.F. - Busy Line C.F. - Don’t Answer C.F. - Intercept Night Connection Outside C.F. - Busy Line C.F. - Don’t Answer C.F. - Intercept Night Connection Outside C.F. - Busy Line C.F. - Don’t Answer C.F. - Intercept Night Connection Outside C.F. - Busy Line C.F. - Don’t Answer C.F. - Intercept Night Connection Outside C.F. - Busy Line C.F. - Don’t Answer C.F. - Intercept Night Connection Outside C.F. - Busy Line C.F. - Don’t Answer C.F. - Intercept Night Connection Outside C.F. - Busy Line C.F. - Don’t Answer C.F. - Intercept Night Connection Outside
NDA-24298 CHAPTER 4
Page 795
Issue 1
ACDN : Assignment of Number of Digits for Consecutive Dialing Data
ACDN: Assignment of Number of Digits for Consecutive Dialing Data
1. General
This command assigns the number of digits to be added to the access code of a distant office that has been
assigned via the AMND command.
2. Precautions
1. The ARTD command is to be used to assign data “1” in the parameter CD prior to the operation of this
command. It is also necessary to assign the distant office code via the AMND command prior to assigning
the data for ACDN.
2. As far as tenants are concerned, the same conditions apply as in the AMND command. If the numbering
plan is common for all tenants (ASYD, SYS1, INDEX 93, bit6=1), assign the TN parameter 1 for all
tenants.
3. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8.
3. Data Entry Instructions
TENANT NUMBER
(TN) DESTINATION CODE
(DC)
MAXIMUM 10 DIGITS NUMBER OF DIGITS OF
CONSECUTIVE DIALING
(CDN)REMARKS
Enter the number of digits to be transmitted after
the dialed number (Destination number).CDN
DC
Enter the access code + area/office code (or its
element) to be specified the necessary digits.
CHAPTER 4 NDA-24298 Page 796 Issue 1 ACDN : Assignment of Number of Digits for Consecutive Dialing Data 4. Data Sheet TENANT NUMBER (TN) DESTINATION CODE (DC) MAX. 10 DIGITSNUMBER OF DIGITS OF CONSECUTIVE DIALING (CDN) 0 – 30REMARKS