NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4
Page 797
Issue 1
AARS : Assignment of Alternative Route Service Restriction
AARS: Assignment of Alternative Route Service Restriction
1. General
This command assigns various service connections between the outgoing route and the incoming route when
they are to be restricted, or to assign the existing restrictions when such service connections are to be canceled.
2. Precautions
If the data is not assigned, the specified connections are to be restricted.
3. Data Entry Instructions
INCOMING ROUTE
NUMBER (ICRT)OUTGOING ROUTE
NUMBER
(OGRT)RESTRICTION
DATA (RES)
0-2ROUTE SERVICE
(RSV)
0/1REMARKS
120
0
RSVRES
0 = Not used 1 = AMP Pool When RSV = 1 (AMP Pool)
0 = Restriction 1 = OGT
2 = ICT
CHAPTER 4 NDA-24298 Page 798 Issue 1 AARS : Assignment of Alternative Route Service Restriction 4. Data Sheet INCOMING ROUTE NUMBER (ICRT)OUTGOING ROUTE NUMBER (OGRT)ROUTE SERVICE (RSV) 0/1RESTRICTION DATA (RES) 0 – 2REMARKS
NDA-24298 CHAPTER 4 Page 799 Issue 1 AARSN : Assignment of Alternative Route Service Restriction for NDM AARSN: Assignment of Alternative Route Service Restriction for NDM 1. General This command assigns various service connections between the outgoing route and the incoming route when they are to be restricted, or to assign the existing restrictions when such service connections are to be canceled. The data assigned by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN). 2. Precautions 1. This command can be used only when logging in to NCN. 2. If the data is not assigned, the specified connections are to be restricted. 3. Data Entry Instructions INCOMING LOGICAL ROUTE NUMBER (IC_LGRT) 1-899OUTGOING LOGICAL ROUTE NUMBER (OG_LGRT) 1-899 ROUTE SERVICE (RSV) 0/1RESTRICTION DATA (RES) 0-2 RES When RSV = 1 (AMP Pool) 0 = Restriction 1 = OGT 2 = ICT RSV 0 = Not used 1 = AMP Pool REMARKS
CHAPTER 4 NDA-24298 Page 800 Issue 1 AARSN : Assignment of Alternative Route Service Restriction for NDM 4. Data Sheet INCOMING LOGICAL ROUTE NUMBER (IC_LGRT) 1-899OUTGOING LOGICAL ROUTE NUMBER (OG-LGRT) 1-899ROUTE SERVICE (RSV) 0/1RESTRICTION DATA (RES) 0-2REMARKS
NDA-24298 CHAPTER 4
Page 801
Issue 1
ALPE: Assignment of Line Privacy Expansion Data
ALPE:Assignment of Line Privacy Expansion Data
1. General
This command assigns the eight-party Conference Trunk (CFT card), which is seized in Line Privacy Expansion
Service on a per-tenant basis.
2. Precautions
1. Enter the data “1” at the TN parameter when “1” is entered at the TNF parameter.
2. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8.
3. The Station Number entered in the STN parameter must correspond to the one assigned at the first circuit
(No. 0 circuit) of the CFT card.
3. Data Entry Instructions
TENANT FLAG
(TNF)
0/1TENANT NUMBER
(TN)
STATION NUMBER
(STN)REMARKS
11311
2
TNF
0 = Separate
1 = Common
CHAPTER 4 NDA-24298 Page 802 Issue 1 ALPE: Assignment of Line Privacy Expansion Data 4. Data Sheet TENANT FLAG (TNF) 0/1TENANT NUMBER (TN)STATION NUMBER (STN) MAX. 6 DIGITSREMARKS
NDA-24298 CHAPTER 4
Page 803
Issue 1
ARPC : Assignment of Remote Point Code for Centralized Service
ARPC: Assignment of Remote Point Code for Centralized Service
1. General
This command assigns the data related to the Message Center Interface - CCIS service feature.
2. Precautions
1. This command is used only at the main office of the Message Center Interface - CCIS service feature.
2. The MCI is installed at the main office of the CCIS network, and the MCI text is transmitted (or received)
to (from) the external VMS when an event treated by the MCI service feature has occurred at the satellite
office.
3. Data Entry Instructions
REMOTE POINT CODE COUNTER (CNT)
1-32CENTRALIZED SERVICE NUMBER
(CSN)
1-7REMOTE POINT CODE
(RPC)
1-16383REMARKS
11
2
3
CSN
RPC
1 = Message Center
2-7 = Not usedEnter the PC of the satellite office.
CHAPTER 4 NDA-24298 Page 804 Issue 1 ARPC : Assignment of Remote Point Code for Centralized Service 4. Data Sheet CENTRALIZED SERVICE NUMBER (CSN) 1-7REMOTE POINT CODE COUNTER (CNT) 1-32REMOTE POINT CODE (RPC) 1-16383REMARKS 11 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
NDA-24298 CHAPTER 4 Page 805 Issue 1 ARDN : Assignment of Remote Control Day/Night ARDN: Assignment of Remote Control Day/Night 1. General This command assigns the data related to the Centralized Day/Night Mode Change service feature. 2. Precautions 1. This command is used only at the Main office which controls the Day/Night mode for the satellite office via the CCIS link. 2. When there are multiple satellite offices created by grouping tenant numbers, the mode can be changed on all the satellite offices or on a per tenant basis. 3. For the Main office, the related indexes of the ASYD command are as follows: SYS1, INDEX18, bit6 (Day/Night change of satellite office) 0/1 = Out/In service SYS1, INDEX75, bit0 (ARSC command Day/Night table) 0/1 = common/separate SYS1, INDEX75, bit1 (ASFC command Day/Night table) 0/1 = common/separate SYS1, INDEX75, bit2 (ATNR command Day/Night table) 0/1 = common/separate SYS1, INDEX75, bit3 (ATDP command Day/Night table) 0/1 = common/separate SYS1, INDEX75, bit4 (AEFR command Day/Night table) 0/1 = common/separate For the Satellite office, the related indexes of the ASYD command are as follows: SYS1, INDEX18, bit7 (Day/Night change is executed by the Main Office) 0/1 = Out/In service SYS1, INDEX19, bit0-3 (Tenant (TN=1-15) of the main office to which the satellite office belongs) SYS1, INDEX75, bit0 (ARSC command Day/Night table) 0/1 = common/separate SYS1, INDEX75, bit1 (ASFC command Day/Night table) 0/1 = common/separate SYS1, INDEX75, bit2 (ATNR command Day/Night table) 0/1 = common/separate SYS1, INDEX75, bit3 (ATDP command Day/Night table) 0/1 = common/separate SYS1, INDEX75, bit4 (AEFR command Day/Night table) 0/1 = common/separate
CHAPTER 4 NDA-24298
Page 806
Issue 1
ARDN : Assignment of Remote Control Day/Night
3. Data Entry Instructions
4. Data Sheet
POINT CODE INDEX
(INDEX)
0 – 15POINT CODE
(PC)
1 – 16383REMARKS
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
POINT CODE INDEX
(INDEX)
0-15POINT CODE
(PC)
1-16383REMARKS
INDEX
Enter an arbitrary unique number within
the range from 0 to 15.PC
Enter the PC of satellite office.