NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 577 Issue 1 ATRK : Assignment of Trunk Data Figure 4-24 ATRK for RST LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LevelLevel Slot n-1 SND#7 SND#6 SND#5 SND#4 REG#7 REG#6 REG#5 REG#4 SND#3 SND#2 SND#1 SND#0 REG#3 REG#2 REG#1 REG#0 The RST mounted slot n SND#7 SND#6 SND#5 SND#4 REG#7 REG#6 REG#5 REG#4 SND#3 SND#2 SND#1 SND#0 REG#3 REG#2 REG#1 REG#0 The RST mounted slot Odd Number Group Even Number GroupGroup n Group n+2 Group n+1 Group n+3 IN CASE OF 16 PORT/SLOT IN CASE OF 32 PORT/SLOT Note:REG#0-REG#7 can be assigned as ORT (RT902), IRT (RT903) or PBR for Automated Attendant service (RT906). SND#0 - SND#7 is assigned for SND (RT905).
CHAPTER 4 NDA-24298 Page 578 Issue 1 ATRK : Assignment of Trunk Data Figure 4-25 ATRK for ATI LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 Level SLOT23 Group 20 Group 22 Group 21 Group 23 IN CASE OF 32 PORT/SLOT CKT#1 CKT#0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 Level SLOT12 Group 20 Group 22 Group 21 Group 23 IN CASE OF 32 PORT/SLOT CKT#1 CKT#0
NDA-24298 CHAPTER 4 Page 579 Issue 1 ATRK : Assignment of Trunk Data Figure 4-26 ATRK for 4DAT LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LevelLevel Slot n-1 CKT#3 CKT#2 CKT#1 CKT#0 The 4DAT mounted slot n The 4DAT mounted slot Odd Number Group Even Number GroupGroup n Group n+2 Group n+1 Group n+3 IN CASE OF 16 PORT/SLOT IN CASE OF 32 PORT/SLOT CKT#3 CKT#2 CKT#1 CKT#0
CHAPTER 4 NDA-24298 Page 580 Issue 1 ATRK : Assignment of Trunk Data Figure 4-27 ATRK for CFT (3-Party Conference) LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 Level CFT#7 CFT#6 CFT#5 CFT#4 CFT#3 CFT#2 CFT#1 CFT#0 roup 20roup 22 roup 21roup 23 32 PORT/SLOT of Odd number unit.
NDA-24298 CHAPTER 4 Page 581 Issue 1 ATRK : Assignment of Trunk Data 3. Data Entry Instructions Internal Trunk Route / External Trunk Route (RT number except 901) Enter the external trunk route number assigned by the ARTD command, or the internal trunk route number as listed below: 901 = ATT 902 = ORT 903 = IRT 904 = MFR 905 = SND 906 = PBR for Automated Attendant Service 907 = AMP 909 = DCFT 913 = DCFT for ATT 915 = Night ATT 916 = MFCR 917 = MFCS 919 = DLINT (for Hotel); MODEM (for Business) 920-926 = MODEM Pooling Trunk 929 = DST 930 = RCT 933 = CRT 934-936 = Not used 937 = MODEM Sender 938 = DLMX 939-947 = Not used 1-255 1 2 3 9XXRT ROUTE NUMBER (RT)TRUNK NUMBER (TK)LINE EQUIPMENT NUMBER (LENS) 6 DIGITS MG U G LV TENANT NUMBER (TN)REMARKS The TN Parameter is appended when the external trunk route number is entered in RT parameter. TNEnter unique trunk number with a range from 1 to 255. TK MG: 00-31, Unit :0-3, Group: 20 , Level: 0 and/or 1 for ATT LENSSFC = 0 should be assigned for ATT.SFC REMARKS TENANT TENANT NUMBER (TN) CNT 1-10 SERVICE FEATURE CLASS (SFC) 0-15 ROUTE RESTRICTION CLASS (RSC) 0-15 LINE EQUIPMENT NUMBER (LENS) 6 DIGITS TRUNK NUMBER (TK) ROUTE NUMBER (RT) LV G U MG RSC = 0 should be assigned for ATT. RSCRT = 901 for ATT. RT TK Enter a unique number as the Attendant Console number 0 2 901 Attendant Console (RT=901)
CHAPTER 4 NDA-24298
Page 582
Issue 1
ATRK : Assignment of Trunk Data
DLMX (RT = 938)
ROUTE
NUMBER
(RT)TRUNK
NUMBER
(TK)
1-255LINE EQUIPMENT
NUMBER
(LENS) 6 DIGITS
MG U G LV
REMARKS
Enter the mounting location of each trunk.
MG: 00-07
Unit: 0-3
Group: 1, 5, 9 (No.0 system)
3, 7, 11 (No.1 system) Note
Level: 7 Enter unique trunk number to the assigned
Route Number with a range from 1 to 255. TK
LENS
Enter “RT = 938” for DLMX. RT
Note: A pair of DLMX card No. 0/No. 1 system
must be mounted in the same Highway
Block (HW).
NDA-24298 CHAPTER 4 Page 583 Issue 1 ATRK : Assignment of Trunk Data 4. Data Sheet (a) External Trunk Data ROUTE NUMBER (RT)TRUNK NUMBER (TK)LINE EQUIPMENT NUMBER (LENS) 6 DIGITSTENANT NUMBER (TN)REMARKS MG U G LV
CHAPTER 4 NDA-24298 Page 584 Issue 1 ATRK : Assignment of Trunk Data (b) Attendant Console Data (RT = 901) Note:Trunk No. refers to ATT No. ROUTE NUMBER (RT)TRUNK NUMBER (TK) NoteLINE EQUIPMENT NUMBER (LENS) 6 DIGITSROUTE RESTRICTION CLASS (RSC) 0 - 15SERVICE FEATURE CLASS (SFC) 0 - 15TENANT MG U G LV(CNT) 1 - 10TENANT NUMBER (TN) 90120 1 20 2 20 3 20 4 20 5 20 6 20 7 20 8 20 9 20 10
NDA-24298 CHAPTER 4 Page 585 Issue 1 ATRK : Assignment of Trunk Data (c) Internal Trunk Data ROUTE NUMBER (RT) 9XXTRUNK NUMBER (TK)LINE EQUIPMENT NUMBER (LENS) 6 DIGITSREMARKS MG U G LV
CHAPTER 4 NDA-24298 Page 586 Issue 1 ARTKN : Assignment of Route Trunk Data for NDM ARTKN: Assignment of Route Trunk Data for NDM 1. General As the functions of ALRTN and ATRK commands are combined into this command, it is used to allocate both the Logical Route Number and the Trunk number (TK) at the same time. The data assigned by this command is written in Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN). 2. Precautions 1. This command can be used only logging in to NCN. 2. When the Logical Route data is deleted by this command, ATRK data of FPC designated Node is also deleted. When you want to delete the allocated Logical Route data only, use ALRTN command. 3. To delete the ATRK data is failed, only the deletion of allocated Logical Route is activated. 3. Data Entry Instructions ROUTE NUMBER (RT)TRUNK NUMBER (TK) LOGICAL ROUTE NUMBER (LGRT)FUSION POINT CODE (FPC) 1-253LINE EQUIPMENT NUMBER (LENS) MG U G LV TENANT NUMBER (TN) LGRT LGRT is the unique number allocated to each external trunk route in the Fusion network. Assign FPC of each node to which the external trunk route belongs.FPCAssign all external routes in the Fusion network.RTEnter unique trunk number with a range from 1 to 255.TK TN The TN parameter is appended when the external trunk route number is entered in RT parameter.