NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

NDA-24298 CHAPTER 4 Page 387 Issue 1 AARPL : Assignment of Area Code Restriction for LDM 4. Data Sheet OUTGOING LOGICAL ROUTE NUMBER (OG-LGRT) 1-899ROUTE RESTRICTION CLASS (RSC) 0 -15FLAG OF 3 OR 6 DIGITS (FLAG) 3 Digits/6 DigitsDESTINATION (AREA/OFFICE) CODE (DC) MAX. 6 DIGITSRESTRICTION DATA (RES) 0/1REMARKS

CHAPTER 4 NDA-24298 Page 388 Issue 1 AARPN : Assignment of Area Code Restriction for NDM AARPN: Assignment of Area Code Restriction for NDM 1. General This command assigns the area/office code of Toll Restriction - 3/6 digits for Fusion service in conjunction with ATDPL (for LDM)/ATDPN (for NDM) command. This data is written in Network Data Memory (NDM) of the Network Control Node (NCN). 2. Precautions 1. This command is used when restriction data is assigned to RES E 2 (Toll Restriction is required) in the ARSCN (NDM) command or in the ARRCN command. 3. Data Entry Instructions Note:In case the data has already been assigned when “Get” button is executed after checking “6 Digits” parameter and entering DC E 000000, “Del” button is not valid while “Set” button is to be effective. Then the Restriction data can be changed (overwritten) by “Set” button. OUTGOING LOGICAL ROUTE NUMBER (OGLGRT) 1-899ROUTE RESTRICTION CLASS (RSC) 0-15FLAG OF 3 OR 6 DIGITS (FLAG) 3 Digits/6 DigitsDESTINATION (AREA/OFFICE) CODE (DC) MAX. 6 DIGITSRESTRICTION DATA (RES) 0/1REMARKS FLAG Select either 3 Digits or 6 Digits check box.RES 0 = Area/Office code is restricted. 1 = Area/Office code is allowed.OGLGRT Assign a unique LGRT No. in the Fusion network. DC should not include the access code.DCRSC assigned by the ARSCN command.RSC

NDA-24298 CHAPTER 4 Page 389 Issue 1 AARPN : Assignment of Area Code Restriction for NDM 4. Data Sheet OUTGOING LOGICAL ROUTE NUMBER (OGLGRT) 1-899ROUTE RESTRICTION CLASS (RSC) 0 -15FLAG OF 3 OR 6 DIGITS (FLAG) 3 Digits/6 DigitsDESTINATION (AREA/OFFICE) CODE (DC) MAX. 6 DIGITSRESTRICTION DATA (RES) 0/1REMARKS

CHAPTER 4 NDA-24298 Page 390 Issue 1 APCR : Assignment of Primary Call Restriction Data APCR: Assignment of Primary Call Restriction Data 1. General This command assigns the restricted area code for LCR outgoing call. 2. Precautions 1. The restriction check by this command is to be executed prior to the ARSC/ATDP/AARP commands. 2. The restricted area code assigned in the PDC parameter can be numbers (0 - 9, * and #), the mask code “X” which represents all kind of numbers (0 - 9, * and #), or “P” for a pause. 3. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8. If data for this command is common for all tenants (ASYD command, SYS1, INDEX94, bit2=1), assign the TN parameter as data “1” for all tenants. 3. Data Entry Instructions 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RESTRICTION DATA (RES) is assigned in the squares where RSC and PDC cross. When unassigned allowed Status. 0 = Restricted 1 = Connection is allowed PDC RES PDC should include the Access Code.BLOCK Unique Block Number should be assigned. TENANT NUMBER (TN)BLOCK NUMBER (BLOCK) 0-49PRIMARY CALL DIGIT CODE (PDC) MAX. 24 DIGITSROUTE RESTRICTION CLASS (RSC) 0-15

NDA-24298 CHAPTER 4 Page 391 Issue 1 APCR : Assignment of Primary Call Restriction Data 4. Data Sheet Note:Restriction Data (RES) is assigned in the squares where BLOCK and RSC cross. When unassigned, Restriction Data is set as “0” (Restricted Status). Allowed Status Data is “1,” and must be assigned to allow the PDC to be dialed. TENANT NUMBER (TN)BLOCK NUMBER (BLOCK) 0 – 49PRIMARY CALL DIGIT CODE (PDC) MAXIMUM 24 DIGITSROUTE RESTRICTION CLASS (RSC) 0 – 15 1234567891011111

CHAPTER 4 NDA-24298 Page 392 Issue 1 AEFR : Assignment of EPN Facility Restriction Data AEFR: Assignment of EPN Facility Restriction Data 1. General This command assigns the allowable connections among the RSC1 (Calling Party’s Restriction Class) and RSC2 (Called Party’s Restriction Class). 2. Precautions 1. Data can be entered on a Day/Night basis, if specified in ASYD command, SYS1, INDEX75, Bit 4=1. 2. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8. If data for this command is common for all tenants (ASYD command, SYS1, INDEX94, bit1=1), assign the TN parameter as data “1” for all tenants. 3. The RSC1 (Calling Party’s Restriction Class) and RSC2 (Called Party’s Restriction Class) of each station is assigned by the RSC parameter of the ASDT command. 4. The RSC1 (Calling Party’s Restriction Class) and RSC2 (Called Party’s Restriction Class) of each trunk route (RT) is assigned by the trunk restriction class (TRSC) parameter of the ARTD command. 5. Before this command is assigned, connections for RSC1 (Calling Party’s Restriction Class) and RSC2 (Called Party’s Restriction Class) are not restricted. 6. Enter data “1 (Connection is allowed)” at the allowable connection of RES parameter. Once data has been assigned on this command, the rest of connections become “0 (Restricted).” 7. If you want to recover the RSC1 (Calling Party’s Restriction Class) and RSC2 (Called Party’s Restriction Class) connections, enter data “0 (Restricted)” for all connections. 8. The DNU = 3 (Urgent Mode) is used for LCR - Controlled Alternate PRSC service which works with the ASYD command SYS1, INDEX59, bit1=1. The RSC2 of this command is referred to as the Priority Restriction Class (PRSC) which is assigned by the AOPR command, or the TRSC parameter of the ARTD command, depending on the system mode. When the urgent mode is launched by either the FRL key of an Attendant Console or the CPRS command, the PRSC parameter of the AOPR command is carried out as the outgoing call restriction matrix assigned by the AEFR command. When the urgent mode has terminated (meaning that either the Day or Night mode has resumed), the outgoing call restriction is referred to by the TRSC parameter of the ARTD command.

NDA-24298 CHAPTER 4 Page 393 Issue 1 AEFR : Assignment of EPN Facility Restriction Data 3. Data Entry Instructions 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 1 2 3 4 Restriction Data (RES) is assigned in the squares where RSC1 and RSC2 cross. 0 = Restricted 1 = Connection is allowedRES DNU D = Day Mode N = Night Mode U = Urgent Mode FRI 0 = Station-to-station call without a station/ATT assistance 1 = Station-to-station call with a station/ATT assistance 2 = Station-to-trunk route access without a station/ATT assistance 3 = Station-to-trunk route with a station/ATT assistance 4 = Trunk incoming call to a station without a station/ATT assistance 5 = Trunk incoming call to a station with a station/ATT assistance 6 = Trunk incoming call to trunk outgoing call (Tandem connection without a station/ATT assistance) 7 = Trunk incoming call to trunk outgoing call (Tandem connection with a station/ATT assistance) 8-31 = Not used DAY/NIGHT/URGENT MODE D/N/UTENANT NUMBER (TN)FACILITY RESTRICTION INDEX (FRI) 0-31 CALLED ROUTE RESTRICTION CLASS (RSC2) 0-15 CALLING ROUTE RESTRICTION CLASS (RSC1) 0-15 Note: Default data is all 1.

CHAPTER 4 NDA-24298 Page 394 Issue 1 AEFR : Assignment of EPN Facility Restriction Data 4. Data Sheet DAY/NIGHT/ URGENT MODE D/N/UTENANT NUMBER (TN)FACILITY RESTRICTION INDEX (FRI) 0 - 31 CALLED ROUTE RESTRICTION CLASS (RSC2) 0 – 15 012345 6 7 8 9101112131415 Calling Route Restriction Class (RSC1) 0 - 150 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

NDA-24298 CHAPTER 4 Page 395 Issue 1 ASFC : Assignment of Service Feature Restriction Class ASFC: Assignment of Service Feature Restriction Class 1. General This command assigns the Service Feature Restriction Class (SFC) for the Service Feature Index (SFI). 2. Precautions 1.Table 4-8 provides the service feature name that corresponds to the SFI. Since the service feature indicated “-” in the table may not always be “Not used” index, do not enter RES = 1 for “-” for the indicated SFI to prevent unexpected service feature effects. 2. Data can be entered on a Day/Night basis if specified in ASYD command, SYS1, INDEX75, Bit 1=1. 3. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX8. If data for this command is common for all tenants (ASYD command, SYS1, INDEX93, bit0=1), assign the TN parameter as data “1” for all tenants. 4. The displayed Service Feature Class (SFC) corresponds to the one assigned by the ASDT command. 5. The restriction data (RES) is entered in the text box where RSC and RRI cross.

CHAPTER 4 NDA-24298 Page 396 Issue 1 ASFC : Assignment of Service Feature Restriction Class 3. Data Entry Instructions Table 4-8 SFI SFI SERVICE FEATURE 1 Outgoing Trunk Queuing 2 Call Back 3 Executive right-of-way (Calling) 4 Executive right-of-way (Called) 5 Call Waiting-Originating (Calling) 6 Call Waiting-Originating (Called) 7 Call Forwarding-All Calls 8 Call Forwarding-Don’t Answer 9 Call Forwarding-Busy Line 10 Call Hold 11 Data Line Privacy/Attendant Camp On (Data Line Security; 0 = Privacy / 1 = Camp On) 12 Speed Calling System 13 Trunk Answer (TAS) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RESTRICTION DATA (RES) is assigned in the squares where SFI and SFC cross. When unassigned, Restriction Data corresponding SFI recognized “0” (Restriction status). 0 = Restricted 1 = Allowed SFI Enter the SFI. Refer to Table 4-8. D/N D = Day N = Night TENANT NUMBER (TN) DAY/NIGHT MODE D/NSERVICE FEATURE INDEX (SFI) 1-255SERVICE RESTRICTION CLASS (SFC)