NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4
Page 547
Issue 1
ARTDN : Assignment of Route Class Data for NDM
8 1 LPTMSender Inter-Digit Pause Index
0 = DP/1 sec., PB/0.5sec. 1 = 600 msec.
2 = 800 msec. 3 = 1000 msec.
4 = 1200 msec. 5 = 1400 msec.
6 = 1600 msec. 7 = 1800 msec.
8 = 2000 msec. 9 = 2200 msec.
10 = 2400 msec. 11 = 2600 msec.
12 = 2800 msec. 13 = 3000 msec.
14 = 3200 msec. 15 = 3400 msec.
(In case of MFC)
0 = 12.0 sec. 1 = 5.5 sec.
2 = 7.0 sec. 3 = 8.5 sec.
4 = 10.0 sec. 5 = 11.5 sec.
6 = 13.0 sec. 7 = 14.5 sec.
8 = 16.0 sec. 9 = 17.5 sec.
10 = 20.0 sec. 11 = 22.0 sec.
12 = 24.0 sec. 13 = 26.0 sec.
14 = 28.0 sec. 15 = 30.0 sec. Note:Possible to use
when adjusting
the duration of
Pause in the
case of Speed
Calling System
or Adding
digits.
82 RSAX 0 0 0 0 Always assign data “0.
83 CST 0 0 0 0 Always assign data “0.
84 CSEG 0 0 0 0 Always assign data “0.
85 CSEU 0 0 0 0 Always assign data “0.
86 CSEL 0 0 0 0 Always assign data “0.
87 CMP 0 0 0 0 Always assign data “0.
88 TALK 0 0 0 0 Always assign data “0.
89 FOT 0 0 0 0 Always assign data “0.
90 RST 0 0 0 0 Always assign data “0.
91 TOCITrunk Override Calling
0 = Override Inhibited (Calling side).
1 = Tie Line Override Service is provided (Calling side).
92 TOCDTrunk Override Called
0 = Override Inhibited (Called side).
1 = Tie Line Override Service is provided (Called side).
9 3 ODGD 0 0 0 0 A lway s ass ign da ta “0.
94 RLS 0 0 0 0 Always assign data “0.
95 GWDGate Way Data Service
0= Out of Service 1 = Gate Way System
2-15= Not used
96 H1ISDN H1 Switching
0=–1=In Service0 0 0 0 Always assign data “0.
97 DT 0000
LGRT
1-899
FUNCTIONREMARKS
Note
CHAPTER 4 NDA-24298
Page 548
Issue 1
ARTDN : Assignment of Route Class Data for NDM
98 CIISDN transmitting information
0 = Out of Service
1 = 16-Digit Caller Number Service, Attribute Informa-
tion Notification Service, and Calling Sub-Address
Transfer Service
2-15= Not used
99 OID 0 0 0 0 Always assign data“0.”
100 TKS 0 0 0 0 Always assign data“0.”
101 PAD2Pad Control Data 2
0-7 = For Pad value, See the NEAX2400 IPX Circuit Card
Manual.PAD value can also be
set by switch setting on
the 8TLT (Long Line
Telephone = TELT) card.
102 TRM 0 0 0 0 Always assign data “0.”
103 TRPX 0 0 0 0 Always assign data “0.”
104 LDR 0 0 0 0 Always assign data “0.”
105 TSC 0 0 0 0 Always assign data “0.”
106 SATS 0 0 0 0 Always assign data “0.”
107 RVPX 0 0 0 0 Always assign data “0.”
108 DQ 0 0 0 0 Always assign data “0.”
109 SLOV Slumber Time Override Service
0 = Out of Service 1 = In Service0000
110 SDTOSystem message automatic output when Connection Ac-
knowledge signal has not been received.
0 = Out of Service 1 = In Service
111 ADVPRAISDN PRI Failure Routing Service
0 = Out of Service 1 = In ServiceThis data is valid for
dummy routes.
112 INDInter-office Name Display
0 = Out of Service 1 = In Service
113 UUI 0 0 0 0 Always assign data “0.”
114 DCH 0 0 0 0 Always assign data “0.”
115 CMRT Common use of Route Numbers of ISDN trunks
0 = Out of Service 1 = In Service
116 PREF 0 0 0 0 Always assign data “0.”
117 DFS 0 0 0 0 Always assign data “0.”
118 BOBBroad Band
0=64K 1=N
× 64K0000
119 HO1CH 0 0 0 0 Always assign data “0.”
120 IFRIndonesia Compulsion Cut Service
0 = Out of Service 1 = In Service0 0 0 0 Always assign data “0.”
LGRT
1-899
FUNCTIONREMARKS
NDA-24298 CHAPTER 4 Page 549 Issue 1 ARTDN : Assignment of Route Class Data for NDM Table 4-23 provides examples of standard route class settings. 12 1 CONVSMDR Called Number Conversation 0 = Conversation Number 1 = In Service 122 OPRTOriginally Trunk Information 0 = Out of Service 1 = In Service 123 CNICalling Number Identification Format 0=No ANI 1 = Feature Group D Format 2=Not used 3=Not used Table 4-23 Examples of Route Class Settings PARAMETERKIND OF LOGICAL TRUNK ROUTE DUMMY ROUTE ANALOG C.O BWTACI S TIE LINE (E&M)DID LINECCIS LINE ISDN LINE (PRI) FUNCTION VOICE DATA B-CH D-CH 1OSGS27000000 2ONSG33022220 3ISGS17700000 4INSG33322220 5TF 33230300 6TCL 1 4 5 4 4 4 4 4 7L/T 1 1 1 1 1 1 1 1 8RLP 2 2 2 2 0 2 2 0 9TQ 00000000 10 SMDR 1 0 0 0 0 0 0 0 11 TD 0 0 0 0 0 0 0 0 12 DR 1 0 1 0 0 0 0 0 13 AC 0 0 0 0 0 0 0 1 14TNT 00000000 15 LSG 0 5 8 12 13 12 13 0 16SMDR200000000 17H/M 00000000 18 MC 0 0 0 0 0 0 0 0 19 ANI 0 0 0 0 0 0 0 0 20D 00000000 21MSB00000000 22MSW00000000 LGRT 1-899 FUNCTIONREMARKS
CHAPTER 4 NDA-24298 Page 550 Issue 1 ARTDN : Assignment of Route Class Data for NDM 23 TR 0 0 0 0 0 0 0 0 24 OC 0 0 0 0 0 0 0 0 25R/L 00000000 26 RVSD 0 0 0 0 0 0 0 0 27 TL 0 0 0 0 0 0 0 0 28 ANS 0 1 1 1 0 1 1 0 29 TELP 0 0 0 0 0 0 0 0 30PAD 00047470 31OGRL00000100 32 ICRL 0 0 0 0 0 1 0 0 33 HD 0 0 0 0 0 0 0 0 34GUARD00000000 35 WINK 0 0 0 0 0 0 0 0 36VAD00000000 37CLD00000000 38 FA 0 0 0 0 0 0 0 0 39 BC 0 0 0 0 0 0 0 0 40TCM00000000 41 TDMQ 0 0 0 0 0 0 0 0 42 TRSC 0 0 0 0 0 0 0 0 43 BT 0 0 0 1 0 0 0 0 44PRV 00000000 45A/D 00000100 46 CW 0 0 0 0 0 0 0 0 47TPQ 00000000 48 BL 0 0 0 0 0 0 0 0 49 TRKS 0 0 0 0 0 0 0 0 50 DPLY 0 0 0 1 0 1 0 0 51ACD00000000 522W/4W00000000 53 FAAT 0 0 0 0 0 0 0 0 54 GW 0 0 0 0 0 0 0 0 55 TCMA 0 0 0 0 0 0 0 0 56SMDR300000000 57 HDT 0 0 0 0 0 0 0 0 58 CD 0 0 0 0 0 0 0 0 59CCH00000000Table 4-23 Examples of Route Class Settings (Continued) PARAMETERKIND OF LOGICAL TRUNK ROUTE DUMMY ROUTE ANALOG C.O BWTACI S TIE LINE (E&M)DID LINECCIS LINE ISDN LINE (PRI) FUNCTION VOICE DATA B-CH D-CH
NDA-24298 CHAPTER 4 Page 551 Issue 1 ARTDN : Assignment of Route Class Data for NDM 60TC/EC00000000 61IRE 00000000 62SCR 00000000 63LYER100000000 64NET 00000000 65 INT 0 0 0 0 0 0 66 DC 0 0 0 0 0 0 67 HKS 0 0 0 0 0 0 0 0 68SCF 00000000 69SMDR400000000 70 TCMN 0 0 0 0 0 0 0 0 71 TCMC 0 0 0 0 0 0 0 0 72 MFSP 0 0 0 0 0 0 0 0 73 KPST 0 0 0 0 0 0 0 0 74 KPPT 0 0 0 0 0 0 0 0 75STC 00000000 76 MC 0 0 0 0 0 0 0 0 77 MT 0 0 0 0 0 0 0 0 78 TONE 0 0 0 0 0 0 0 0 79 PPTM 0 0 0 0 0 0 0 0 80 MPTM 0 0 0 0 0 0 0 0 81 LPTM 0 0 0 0 0 0 0 0 82 RSAX 0 0 0 0 0 0 0 0 83CST 00000000 84 CSEG 0 0 0 0 0 0 0 0 85 CSEU 0 0 0 0 0 0 0 0 86 CSEL 0 0 0 0 0 0 0 0 87CMP00000000 88 TALK 0 0 0 0 0 0 0 0 89FOT 00000000 90RST 00000000 91 TOCI 0 0 0 0 0 0 0 0 92 TOCD 0 0 0 0 0 0 0 0 93 ODGD 0 0 0 0 0 0 0 0 94RLS 00000000 95GWD00000000 96 H1 0 0 0 0 0 0 0 0Table 4-23 Examples of Route Class Settings (Continued) PARAMETERKIND OF LOGICAL TRUNK ROUTE DUMMY ROUTE ANALOG C.O BWTACI S TIE LINE (E&M)DID LINECCIS LINE ISDN LINE (PRI) FUNCTION VOICE DATA B-CH D-CH
CHAPTER 4 NDA-24298 Page 552 Issue 1 ARTDN : Assignment of Route Class Data for NDM 97 DT 0 0 0 0 0 0 0 0 98 CI 0 0 0 0 0 0 0 0 99OID 00000000 100 TKS 0 0 0 0 0 0 0 0 101 PAD2 0 0 0 0 0 0 0 0 102 TRM 0 0 0 0 0 0 0 0 103TRPX00000000 104 LDR 0 0 0 0 0 0 0 0 105 TSC 0 0 0 0 0 0 0 0 106SATS00000000 107RVPX00000000 108DQ 00000000 109SLOV00000000 110SDTO00000000 111ADVPRA0000000 112 IND 0 0 0 0 0 0 0 0 113 UUI 0 0 0 0 0 0 0 0 114 DCH 0 0 0 0 0 0 0 0 115CMRT00000000 116PREF00000000 117 DFS 0 0 0 0 0 0 0 0 118 BOB 0 0 0 0 0 0 0 0 119 HO1CH 0 0 0 0 0 0 0 0 120 IFR 0 0 0 0 0 0 0 0 121 CONV 0 0 0 0 0 0 0 0 122OPRT00000000 123 CN1 0 0 0 0 0 0 0 0Table 4-23 Examples of Route Class Settings (Continued) PARAMETERKIND OF LOGICAL TRUNK ROUTE DUMMY ROUTE ANALOG C.O BWTACI S TIE LINE (E&M)DID LINECCIS LINE ISDN LINE (PRI) FUNCTION VOICE DATA B-CH D-CH
NDA-24298 CHAPTER 4 Page 553 Issue 1 ALRNN : Assignment of Logical Route and Route Class Data for NDM ALRNN: Assignment of Logical Route and Route Class Data for NDM 1. General As the functions of ALRTN, ARTD and ARTDN commands are combined into this command, it can be used to allocate the Logical Route number and to assign/delete Route Class data at the same time. The data assigned by this command is written in Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN). 2. Precautions 1. This command can be used only when logging in to NCN. 2. When Route Class Data is assigned to NDM, the data is also assigned to FPC designated node. 3. In case of data deletion by this command, Route Class Data of both NDM and FPC designated node are deleted. As the DM data set by ARTD command is also deleted in this process, when you want to delete the allocated Logical Route Number only, use ALRTN command. 3. Data Entry Instructions See data sheet in Section 4.
CHAPTER 4 NDA-24298 Page 554 Issue 1 ALRNN : Assignment of Logical Route and Route Class Data for NDM 4. Data Sheet LOGICAL ROUTE (LGRT) 1-899 REMARKS FUSION POINT CODE (FPC) 1-253 ROUTE NUMBER (RT) 1-255 1OSGSSignal Interface for Outgoing 0 = CCIS No.7 1 = RingDown 2 = Second Dial Tone 3 = Not used 4 = Sender (Immediate Start)Note 5=Not used 6 = Sender (Delay Dial Start) 7 = Sender (Wink start) 8-15= Not used Note:The select signal in ONSG should be “DP.” 2 ONSGSignal Selection for Outgoing 0 = Not used 1 = DP, 10 pps, 33% Make 2 = PB, 60msec. Interruption or CCIS No.7 3= DP/PB 4 = MF 5 = DP, 20 pps, 33% Make 6= Not used 7 = DP, 20 pps, 50% Make 8 = PB, 120 msec. Interruption 9 = DP, 10 pps, 40% Make 10 = MFC 11-15=Not used 3 ISGS Signal Interface for Incoming 0 = CCIS No.7 1 = Ring Down 2 = Second Dial Tone 3 = Not used 4 = Sender (Immediate Start)Note 5=Not used 6 = Sender (Delay Dial Start) 7 = Sender (Wink Start) 8-15= Not used Note:The select signal in INSG should be “DP.” 4INSGSignal Selection for Incoming 0 = Not used 1= DP, 10 pps, 33% Make 2 = PB, 60msec. Interruption or CCIS No.7 3= DP/PB 4= MF 5 = DP, 20 pps, 33% Make 6= Not used 7 = DP, 20 pps, 50% Make 8 = PB, 120 msec. Interruption 9 = DP, 10 pps, 40% Make 10 = MFC 11-15=Not used 5TFType of Trunk Function 0=Not used 1 = Outgoing Trunk (OGT) 2 = Incoming Trunk (ICT) 3 = Bothway Trunk (BWT)
NDA-24298 CHAPTER 4 Page 555 Issue 1 ALRNN : Assignment of Logical Route and Route Class Data for NDM 6TCLTrunk Class Specify the kind of trunk 1 = DDD Line 2= FX 3= WATS Line 4 = Tie Line/Announcement Trunk 5= CCSA 6 = Toll Terminal 7= CAS Line 8= Paging 9 = Code Call Trunk 10 = Dictation Trunk 11 = General Paging Trunk 12 = Radio Paging Trunk 13 - 31 = Not used 7L/TLine/Trunk Identification 0 = Not used (Line) 1 = Trunk11111Always assign data “1.” 8RLPTrunk Release Pattern 0 = Calling Party Release (Outgoing only) 1=Not used 2 = First Party Release (either station or trunk side) 3=Not usedNormally assign data “2” 9TQOutgoing Trunk Queuing 0 = Out of Service 1 = In Service 10 SMDRDetailed Billing Information 0 = SMDR Out of Service 1 = SMDR In Service (ORT required for receiving all dialed digits 11TD Toll Denial Battery Reversal 00000Always assign data “0.” 12 DRDistinctive Ringing Pattern This parameter designates whether distinctive ringing will be provided for an incoming call. 0 = Distinctive Ringing is not required (ASYD, SYS 3, Index 3, Bit 0=0) 1 = Distinctive Ringing is required (ASYD, SYS 3, Index 3, Bit 0=1) 13 ACFlexible Routing Pattern Designation When outgoing route selection pattern number is to be determined by the AFRS command, “1” is to be assigned if the Access Code is included in the Number Pattern Code (NPC). 0 = When flexible routing is executed, numbers are translated excluding the Access Code 1 = When flexible routing is executed, numbers are translated including the Access CodeThis data is valid for dummy routes. Assign data “1” for the dummy route. 14 TNTTenant Number Check 0 = Tenant number check is not required in trunk selection.00000Always assign data “0.” LOGICAL ROUTE (LGRT) 1-899 REMARKS FUSION POINT CODE (FPC) 1-253 ROUTE NUMBER (RT) 1-255
CHAPTER 4 NDA-24298 Page 556 Issue 1 ALRNN : Assignment of Logical Route and Route Class Data for NDM 15 LSGLine Signal 0= Loop 1 = Ground Start C.O. Line 2= CCH 3 = Caller ID (Loop) 4= Loop 5 = E&M Tie Line 6= DX 7= 24V4 8 = Loop DID 9 - 11 = Not used 12 = Speech Line (for CCIS No. 7 or Bch of ISDN) 13 = Signal Line (for CCIS No. 7 or Dch of ISDN) 14 = Not used 15 = Not used 16 SMDR2 Detailed Billing InformationSee Figure 4-17 and Table 4-24. 17 H/MHotel Service in CCIS No. 7 0 = Out of Service 1 = In Service 18MC 00000Always assign data “0.” 19 ANIE911 - ANI Service 0 = Out of Service 1 = In Service 20D 00000Always assign data “0.” 21MSB 00000Always assign data “0.” 22MSW 00000Always assign data “0.” 23 TR0=– 1 = ICPT transfer by group-II signals used.For MFC signaling LOGICAL ROUTE (LGRT) 1-899 REMARKS FUSION POINT CODE (FPC) 1-253 ROUTE NUMBER (RT) 1-255