Home > NEC > Communications System > NEC Neax 2400 Ipx Office Data Specification

NEC Neax 2400 Ipx Office Data Specification

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1020
    Add page 691 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 657
Issue 1
ARTIN : Assignment of Trunk Application Data for NDM
35 L/T Local/Toll (Russia only)
When assigning this data, always enter zero (0).0000
36 ECCISEvent Based CCIS (E-CCIS)
0 = Invalid
1 = Valid
37 ECCISTMRelease timer for E-CCIS Line
0: 3 minutes (Default)
1: 15 seconds
2: 30 seconds
3: 1 minute
4: 2 minutes
5: 5 minutes
6: 10 minutes
7: 15 minutes
8: 30 minutes
9: 1 hour
10-13: Not used
14: Immediately after call completion (for 
Speech Channel)/1 minute (for Sin-
gle Channel)
15: Not released
38 ECCISOBOG Billing for E-CCIS Line
0 = Not required
1 = Required
39 ECCISIB IC Billing for E-CCIS Line 
0 = Not required
1 = Required
40 SPMET Account Pulse Watch Control
Not used 
41 IDRT ID Code Specification
Not used
42 ECCISTD Addressing Information used in
E-CCIS
0 = Called DID number
1 = Called Sub Address
43 MFCG2
M FC  Outg o in g C a ll G II (Calling Party 
Category) 
0 = Subscriber with Priority
1 = Subscriber without Priority
44 OPCCOptimal Call Control
0 = In Service
1 = Out of Service
45 ICTCON ICT Control
0 = Send ALERT
1 = Send CONN
When assigning this data, zero (0) should 
always be entered.0000
46 VRD Voice Recognize Dial
When assigning this data, zero (0) should 
always be entered. 0000
CDNLOGICAL ROUTE NUMBER (1-899)
TRUNK DATA
    Add page 692 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 658
Issue 1
ARTIN : Assignment of Trunk Application Data for NDM
47 INTD
Interface Detail
0 = Q-SIG
1 = IS-11572
48 JECCIS
Common Use with E-CCIS RT
0 = Out of Service
1 = In Service
49 ECCIS2
E-CCIS System
0 = Out of Service
1 = Common Channel System
2 = Not used
3 = Not used
50 IPINT (Japan only)
Public PCS Protocol
0-5 = Not used
6 = IP Protocol (2B+D)
7 = Public PCS Protocol (2B+D)
8-15 = Not used
51 IPTK
IP Trunk
0 =  Out  of  Service1 = In Service
52 CTCF
Call Transfer/Forwarding Q.SIG 
Supplementary Service
0 = Out of service
1 = In Service
53 RERT
Rerouting Function
0 = Out of service
1 = In Service
54 DCANS
Answer when DC Dialing
0 = Out of service
1 = In Service
55 RND
Trunk Select Data in  Round Robin 
Formula
0 = Out of service
1 = In Service
56 CLBK Kind of Collect Call Blocking Signal (for Brazil 
only)
0 = GB-7
1 = GB-3
CDNLOGICAL ROUTE NUMBER (1-899)
TRUNK DATA
    Add page 693 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 659
Issue 1
ASHP : Assignment of Station Hunting Group-Pilot
ASHP: Assignment of Station Hunting Group-Pilot 
1. General
This command assigns the data related to the Station Hunting - Pilot service feature. 
2. Precautions
1. This command is also used to modify and delete the Station Hunting - Pilot service feature related data.
2. The maximum number of member stations within a Hunting Group is 100. 
3. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. 
4. The Pilot station number is assigned in the STN parameter. 
5. Press ESC to skip forward to the SECRETARY parameter when all the desired member stations have been
entered.
6. Enter space (blank) in the SECRETARY parameter if a secretary station is not required. 
7. The Phantom station number (which is assigned by the APHN command) cannot be assigned for the pilot
station number of the Station Hunting - Pilot. 
3. Data Entry Instructions
Note:Enter the Station Number to be assigned in “EDIT STN” box on the display.
NUMBER 
OF 
STATIONS 
(CNT)NUMBER 
OF 
STATIONS 
(CNT) TENANT 
NUMBER (TN)
1-63SECRETARY STATION NUMBER 
(SECRETARY) STATION NUMBER 
(STN)
STN NUMBER 
OF 
STATIONS 
(CNT) STN NUMBER 
OF 
STATIONS 
(CNT) STN STN  STATION NUMBER (STN)
SECRETARY
Enter the secretary station number if required.
2
3
4
527
28
29
3052
53
54
5577
78
79
80
    Add page 694 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 660
Issue 1
ASHP : Assignment of Station Hunting Group-Pilot
4. Data Sheet
TENANT NUMBER 
(TN)PILOT STATION 
NUMBER
(STN)SECRETARY STATION NUMBER
(SECRETARY)
STATION NUMBER (STN) 
NUMBER
OF
STATIONS
(CNT)STNNUMBER
OF
STATIONS
(CNT)STNNUMBER
OF
STATIONS
(CNT)STNNUMBER
OF
STATIONS
(CNT)STN
2 275277
3 285378
4 295479
5 305580
6 315681
7325782
8335883
9345984
10 35 60 85
11 36 61 86
12 37 62 87
13 38 63 88
14 39 64 89
15 40 65 90
16 41 66 91
17 42 67 92
18 43 68 93
19 44 69 94
20 45 70 95
21 46 71 96
22 47 72 97
23 48 73 98
24 49 74 99
25 50 75 100
26 51 76
    Add page 695 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 661
Issue 1
ASHPL : Assignment of Station Hunting Group-Pilot for LDM
ASHPL: Assignment of Station Hunting Group-Pilot for LDM
1. General
This command assigns the data related to the Station Hunting - Pilot. With this command, Station Hunting
Group - Pilot can be assigned by using Telephone Number.
2. Precautions
1. This command is also used to modify and delete the Station Hunting - Pilot service feature related data.
2. The maximum number of member stations within a Hunting Group is 100. 
3. There is no limitation on the number of Pilot groups in a system.
4. The Pilot station number is assigned in the TELN parameter.
5. The data assigned at this command is invalid in Fusion Network.
3. Data Entry Instructions
Note:Enter the Telephone Number to be assigned in “EDIT TELN” box on the display.
NUMBER 
OF 
STATIONS 
(CNT)NUMBER 
OF 
STATIONS 
(CNT) USER GROUP 
NUMBER (UGN)SECRETARY TELEPHONE 
NUMBER (SECRETARY TELN)
Max. 16 digits TELEPHONE NUMBER 
(TELN)
Max. 16 digits
TELN TELN TELN TELNNUMBER 
OF 
STATIONS 
(CNT)NUMBER 
OF 
STATIONS 
(CNT)  STATION NUMBER (STN)
SECRETARY TELN
Enter the secretary telephone number 
if required.
TELN CNT 2-100
Telephone Number of the member stations. Fixed to 1.UGN
2
3
4
527
28
29
3052
53
54
5577
78
79
80
1
    Add page 696 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 662
Issue 1
ASHPL : Assignment of Station Hunting Group-Pilot for LDM
4. Data Sheet
USER GROUP NUMBER 
(UGN)TELEPHONE NUMBER 
(TELN)SECRETARY TELEPHONE NUMBER
(SECRETARY TELN)
NUMBER
OF 
STATIONS 
(CNT)TELEPHONE 
NUMBER 
(TELN)NUMBER
OF 
STATIONS 
(CNT)TELEPHONE 
NUMBER 
(TELN)NUMBER
OF 
STATIONS 
(CNT)TELEPHONE 
NUMBER 
(TELN)NUMBER
OF 
STATIONS 
(CNT)TELEPHONE 
NUMBER 
(TELN)
2 275277
3 285378
4 295479
5 305580
6 315681
7 325782
8 335883
9 345984
10 35 60 85
11 36 61 86
12 37 62 87
13 38 63 88
14 39 64 89
15 40 65 90
16 41 66 91
17 42 67 92
18 43 68 93
19 44 69 94
20 45 70 95
21 46 71 96
22 47 72 97
23 48 73 98
24 49 74 99
25 50 75 100
26 51 76
    Add page 697 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 663
Issue 1
ASHPN : Assignment of Station Hunting Group-Pilot for NDM
ASHPN: Assignment of Station Hunting Group-Pilot for NDM
1. General
This command assigns the data related to the Station Hunting - Pilot for Fusion Service. The data assigned by
this command is written in Network Data Memory (NDM) of the Network Control Node (NCN), updating NDM
at each Local Node (LN).
2. Precautions
1. This command is also used to modify and delete the Station Hunting - Pilot service feature related data.
2. The maximum number of member stations within a Hunting Group is 100. 
3. The Pilot station number is assigned in the TELN parameter.
3. Data Entry Instructions
Note:Enter the Telephone Number to be assigned in “EDIT TELN” box on the display.
NUMBER 
OF 
STATIONS 
(CNT)NUMBER 
OF 
STATIONS 
(CNT) USER GROUP 
NUMBER (UGN)SECRETARY TELEPHONE 
NUMBER (SECRETARY TELN)
Max.16 digits TELEPHONE NUMBER 
(TELN)
Max.16 digits
TELN TELN TELN TELNNUMBER 
OF 
STATIONS 
(CNT)NUMBER 
OF 
STATIONS 
(CNT)  STATION NUMBER (STN)
SECRETARY TELN
Enter the secretary station number if required.
Fixed to 1UGN
2
3
4
527
28
29
3052
53
54
5577
78
79
80
1
    Add page 698 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 664
Issue 1
ASHPN : Assignment of Station Hunting Group-Pilot for NDM
4. Data Sheet
USER GROUP NUMBER 
(UGN)TELEPHONE NUMBER 
(TELN)
NUMBER
OF 
STATIONS 
(CNT)TELEPHONE 
NUMBER 
(TELN)NUMBER
OF 
STATIONS 
(CNT)TELEPHONE 
NUMBER 
(TELN)NUMBER
OF 
STATIONS 
(CNT)TELEPHONE 
NUMBER 
(TELN)NUMBER
OF 
STATIONS 
(CNT)TELEPHONE 
NUMBER 
(TELN)
2 275277
3 285378
4 295479
5 305580
6 315681
7 325782
8 335883
9 345984
10 35 60 85
11 36 61 86
12 37 62 87
13 38 63 88
14 39 64 89
15 40 65 90
16 41 66 91
17 42 67 92
18 43 68 93
19 44 69 94
20 45 70 95
21 46 71 96
22 47 72 97
23 48 73 98
24 49 74 99
25 50 75 100
26 51 76
    Add page 699 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 665
Issue 1
ASHC : Assignment of Station Hunting Group - Circular
ASHC: Assignment of Station Hunting Group - Circular
1. General
This command assigns the data related to the Station Hunting - Circular service feature. 
2. Precautions
1. This command is also used to modify and delete the Station Hunting - Circular service feature related
data.
2. The maximum number of member stations within a Hunting Group is 100. 
3. When assigning the Circular Hunting member station data, the data entered in the STN text box must be
reentered as CNT 1 text box. 
Example:When the station numbers 300, 301, and 302 are the members of the Station Hunting - Circular group, 
assign the data as follows:
STN = 300
CNT 1 = 300
CNT 2 = 301
CNT 3 = 302
4. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. 
5. Press ESC to skip forward to the SECRETARY parameter when all the desired member stations have been
entered.
6. Enter space (blank) in the SECRETARY parameter if a secretary station is not required.
    Add page 700 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 666
Issue 1
ASHC : Assignment of Station Hunting Group - Circular
3. Data Entry Instructions
Note:Enter the Station Number to be assigned in “EDIT STN” box on the display.
NUMBER 
OF 
STATIONS 
(CNT)NUMBER 
OF 
STATIONS 
(CNT) TENANT 
NUMBER (TN)
1-63SECRETARY STATION NUMBER 
(SECRET STN)
Max. 5 digits STATION NUMBER 
(STN)
Max. 5 digits
STN NUMBER 
OF 
STATIONS 
(CNT) STN NUMBER 
OF 
STATIONS 
(CNT) STN STN  STATION NUMBER (STN)
SECRETARY
Enter the secretary station number if required.
CNT 1
CNT 2 - 100Enter the  station number specified in STN parameter
Enter the  member station number
1
2
3
426
27
28
29 400
401
402
403 1 400 500
51
52
53
5476
77
78
79
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Ipx Office Data Specification