NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 197 Issue 1 AIOC : Assignment of IOC Port Data CHARACTER BIT0=8bits 1=7bitsBUSY SIGNAL0=(+)1=(-) SYNC CHARACTER 0=Bi-sync 1=Mono-sync PB SIGNAL 0=No PB signal 1=PB signal is required ENH (Extended block parameter) 0=Invalid Note 1=Valid (Continue to following attribution data assignment.) Note: Standard data is 0. SYNC0=ST1 1=ST2 (SPEED) 0-6 (PROTOCOL) 0-2(PARITY BIT) 0-3(STOP BIT) 0-3(SYNC) 0/1(CHARACTER BIT) 0/1(SYNC CHAR- ACTER) 0/1(BUSY SIGNAL) 0/1 SPEED0=Default(4800bps) 1=300bps 3=1200bps 5=4800bps2=600bps 4=2400bps 6=9600bps PARITY BIT0=Non Parity 1=Odd Parity 2=Even Parity 3=Non Parity STOP BIT 0=2bits 1=1bit 2=1+1/2bits 3=2bits TERMINAL=7 (PMS) / 8 (Hotel Printer) PROTOCOL0=Free Wheeling 1=BSC Pooling 2=BSC Contention 3=Level 2A 4=Level 2B (ENH) 0/1 (PB SIGNAL) 0/1 WR (Transmission method) 0 Fixed. (RS ON always) ET (EOT on reset) 0=Invalid 1=Valid (PM) 0/1 (CLASS) 0-3(CN) 0-3(FL) 0/1(ET) 0/1(KJ) 0/1(WR) (DR) 0/1 PM (Priority Point specification) 0=First Priority Point 1=Second Priority Point CN (Continuous Transmission) 0=Invalid 1=Valid FL (Reception buffer shortage) 0=NAK 1=WABT KJ (Kanji Character code) 0=Invalid 1=Valid DR (DR signal disregard) 0=Invalid 1=Valid Following optional parameters appear when ENH (Extended block parameter) = 1. CLASS0=-CR/LF 1=-CR 2=STX-ETX 3=STX-ETX/BCC
CHAPTER 4 NDA-24298 Page 198 Issue 1 AIOC : Assignment of IOC Port Data Example: Standard data for PMS and Hotel printer. PMS (Level 2A): PROTOCOL = 3 (Level 2A) SPEED = 3 (1200bps) PARITY BIT = 2 (Even Parity) STOP BIT = 0 (2bits) SYNC = 0 (Not used) CHARACTER BIT = 0 (8bits) SYNC CHARACTER = 0 (Not used) BUSY SIGNAL = 0 (Not used) PB SIGNAL = 0 (No PB signal) ENH = 0 (Invalid) Hotel Printer: PROTOCOL = 0 (Free Wheeling) SPEED = 3 (1200bps) PARITY BIT = 0 (No Parity) STOP BIT = 0 (2bits) CHARACTER BIT = 0 (8bits) Others = 0 (Not used) (XO) 0/1 (CD) 0/1(SN) 0/1(SA) 20-7E Hex.(TUA) 20-7E Hex.(RUA) 20-7E Hex. X0 (X-ON / OFF Control) 0=Invalid 1=Valid SN (Transmission address number control) 0=Invalid 1=Valid CD (CD Signal disregard) 0=Invalid 1=Valid SA (Station address) 20 Hex. - 7E Hex. RUA (Unit address for reception) 20 Hex. - 7E Hex. TUA (Unit address for transmission) 20 Hex. - 7E Hex.
NDA-24298 CHAPTER 4 Page 199 Issue 1 AIOC : Assignment of IOC Port Data 4. Data Sheet (a) TERMINAL=1 (Printer/MCI) (b) TERMINAL=2 (MAT) (c) TERMINAL=3 (CMAT) IOC PORT NUMBER (IOC)TERMINAL KIND (TERMINAL) 1 (SPEED) (PARITY BIT) (STOP BIT) (CHARACTER BIT) REMARKS IOC PORT NUMBER (IOC)TERMINAL KIND (TERMINAL) 2 (SYMSCAN) (SPEED) (MTYPE) REMARKS IOC PORT NUMBER (IOC)TERMINAL KIND (TERMINAL) 3 (SYMSCAN) (SPEED) (MTYPE) REMARKS
CHAPTER 4 NDA-24298 Page 200 Issue 1 AIOC : Assignment of IOC Port Data (d) TERMINAL=4 (SMDR FREE WHEELING) (e) TERMINAL=5 (SMDR BSC) (f) TERMINAL=6 (ATM Module) IOC PORT NUMBER (IOC)TERMINAL KIND (TERMINAL) 4 (PROTOCOL) (SPEED) (PARITY BIT) (STOP BIT) (CHARACTER BIT) 00 0 IOC PORT NUMBER (IOC)TERMINAL KIND (TERMINAL) 5 (PROTOCOL) (SPEED)(PARITY BIT)(STOP BIT)(SYNC) (CHARACTER BIT)(SYNC CHARACTER)(BUSY SIGNAL) IOC PORT NUMBER (IOC)TERMINAL KIND (TERMINAL) 6 (SPEED) (PARITY BIT) (STOP BIT) (CHARACTER BIT) (ATM)
NDA-24298 CHAPTER 4 Page 201 Issue 1 AIOC : Assignment of IOC Port Data (g) TERMINAL=7 (PMS) When ENH=1 (Option), IOC PORT NUMBER (IOC)TERMINAL KIND (TERMINAL) 7 (PROTOCOL) (SPEED) (PARITY BIT) (STOP BIT) (SYNC) (CHARACTER BIT)(SYNC CHARACTER)(BUSY SIGNAL) (PB SIGNAL) 0/1(ENH) 0/1 (CLASS) 0-3(PM) 0/1(CN) 0-3(FL) 0/1(ET) 0/1(KJ) 0/1(WR) (DR) 0/1 (CD) 0/1(XO) 0/1(SN) 0/1(SA) 20-7E Hex.(TUA) 20-7E Hex.(RUA) 20-7E Hex.
CHAPTER 4 NDA-24298 Page 202 Issue 1 AIOC : Assignment of IOC Port Data (h) TERMINAL=8 (Hotel Printer) IOC PORT NUMBER (IOC)TERMINAL KIND (TERMINAL) 10 (PROTOCOL) (SPEED) (PARITY BIT) (STOP BIT) (SYNC) (CHARACTER BIT)(SYNC CHARACTER)(BUSY SIGNAL) (PB SIGNAL) 0/1(ENH) 0/1
NDA-24298 CHAPTER 4 Page 203 Issue 1 ASTD : Assignment of State Translation Data ASTD: Assignment of State Translation Data 1. General This command translates the system attributes. 2. Precautions One STM contains multiple numbers of STS(s), and the combination of the STM”n” and STS”n” has one kind of (or multiple kinds of) purpose(s) to be designated. The data zero (0) or one (1) assigned in ST designates how the system works. See Table 4-3 for Assignment of ASTD. 3. Data Assignment Instructions See Table 4-3. Table 4-3 List for Assignment of ASTD STM STSST * = standard settings 00Processing at the time of originating an outgoing C.O. line call0If the calling station is that of RSC = 1, 3, the call is outgoing via LCR 1* The call is processed by second dial tone system. Processing for an override from a station into a connection between COT and another station0 Override not allowed 1* Override allowed Passing dial tone0 Invalid 1* Valid Processing for warning tone sending at the moment when ATT has overridden into a connection between COT and a station (Busy Verification)0Warning tone is sent out to both the ATT and the station. 1*Warning tone is sent out to both the station, ATT, and C.O. side. Processing for a warning tone sending at the moment when ATT has overridden into busy COT (Attendant Override)0 Warning tone is not sent out the C.O. side. 1* Warning tone is also sent out to the C.O. side. 1Kind of trunk to be seized for an outgoing C.O. line call from ATT0BWT only 1* Either BWT or OGT as the case may be 2 Tandem connection with COT included0 Restricted 1* Allowed (depending on ARRC) 3 Enable Passing Dial Tone 0* 4 Busy Verification Tone for Att. and Sta. only 0*
CHAPTER 4 NDA-24298 Page 204 Issue 1 ASTD : Assignment of State Translation Data 10 Trunk Release0 Station (Calling Party Release) 1 Trunk Note 1 1 2 3 4 * = standard settings Note 2:One setting applies to five items. (STM=0, STS 0) 20 Three-way calling with COT included0 Restricted 1* Allowed 1Three-way calling with COT included in Execu- tive Right of Way service0 Restricted 1* Allowed 2Outgoing call to a C.O. Line or a Tie Line after holding the COT0 Restricted 1* Allowed 3Outgoing call to a C.O. Line after holding a sta- tion or a Tie Line0 Restricted 1* Allowed 4Processing for calling a fully-restricted station after holding the COT0 Restricted 1*Allowed Note:The call can be transferred. 5Processing in which ATT overrides to the con- nection between the COT and a station (Busy Verification) and then the Busy Verification Warning Tone is sent out periodically0*Warning tone is sent out to both the station and the ATT 1Warning tone is sent out to the station, ATT, and C.O. side. 6Step call when a Tie Line incoming call encoun- ters busy0Allowed 1 Restricted 4 0 Remote Access to PBX/Automated Attendant0 Not provided 1* In service 60 DAY/NIGHT mode changeover system0 Not used. 1* Fixed to “1”. 10* 20* 30* Note 1: Valid when C.O. line has a release signal. (Standard Setting is “1”.) Table 4-3 List for Assignment of ASTD (Continued) STM STSST * = standard settings
NDA-24298 CHAPTER 4 Page 205 Issue 1 ASTD : Assignment of State Translation Data 4. Data Assignment Sheet STATE TRANSLATION MAIN CATEGORY NUMBER (STM) 0 - 31STATE TRANSLATION CATEGORY NUMBER (STS) 0 - 31STATE TRANSLATION INFORMATION (ST) 0/1REMARKS
CHAPTER 4 NDA-24298 Page 206 Issue 1 AOFC : Assignment of Office Name AOFC: Assignment of Office Name 1. General This command assigns the office name. 2. Precautions 1. The data assignment of this command is the same as the ASYD command SYS1, INDEX96 through 115. 2. The office name is also included in the dump files of LIST UP, Traffic Measurement, and System Message. 3. Data Entry Instructions Maximum 20 characters of office name.OFFICE NAME MAXIMUM 20 CHARACTERS(OFFICE NAME) REMARKS