NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 417 Issue 1 ASCL_T : Assignment of Station Class Data – Telephone Number ASCL_T : Assignment of Station Class Data – Telephone Number 1. General This command is used to change the Telephone Equipment Class (TEC), Route Restriction Class (RSC), and Service Feature Restriction Class (SFC), without changing the station number. The station data of ASCL com- mand can be assigned by using Telephone Number. 2. Precautions 1. Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the ALGSL command is not available in this command. 2. In case logging in to a LN, only the Telephone Numbers allocated to the stations within the logged-in node can be used in this command. Also, when logging in to the NCN, the data memory of the whole nodes in the network can be written. 3. The station class data (TEC, RSC and SFC) can be changed by ASCL_N command, even if the station to be changed is in busy status (conversation is in progress). When the station becomes idle, the new class data becomes effective. 4. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8. 5. The TEC cannot be changed from a Dterm Class (TEC=12) to any other Telephone Class, and vice versa. When it is necessary to change the current TEC to another type of TEC, use the ASDT command to delete the current station data and assign new station data. 6. The RSC corresponds to the ARSC command, and the SFC corresponds to the ASFC command as well. 7. Update the new class data on the data sheet in the ASDT command. 8. This command is an available software enhancement.
CHAPTER 4 NDA-24298 Page 418 Issue 1 ASCL_T : Assignment of Station Class Data – Telephone Number 3. Data Entry Instruction Note: The existing data can be readout by pressing “Get” button after UGN and TELN is entered. USER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN) Max. 16 digitsTELEPHONE EQUIPMENT CLASS (TEC) 1-31ROUTE RESTRICTION CLASS (RSC) 0-15SERVICE FEATURE CLASS (SFC) 0-15 RSC Enter the Route Restriction Class referring to the ARSC command.TELN Enter the Telephone Number of the station which the station class data to be changed. SFC Enter the Service Feature Class referring to the ASFC command.TEC 1 = DP (10 pps) 2 = PB 12 = D 15 = CAS Line 17 = Not used 23 = ISDN Terminal 27 = Eight Conference Equipment (Add-on Conferencing) 3 = DP/PB 4 = DP (20 pps) 13 = Data Terminal via D 16 = Data Terminal via Data Module 18 = Virtual Line Appearance 24-26 = Not used 5-11 = Not used 14 = Hot Line 19-22 = Not used 28-31 = Not used term term
NDA-24298 CHAPTER 4 Page 419 Issue 1 ASCL_T : Assignment of Station Class Data – Telephone Number 4. Data Sheet USER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN) Max. 16 digitsTELEPHONE EQUIPMENT CLASS (TEC) 1-31ROUTE RESTRICTION CLASS (RSC) 0-15SERVICE FEATURE CLASS (SFC) 0-15
CHAPTER 4 NDA-24298 Page 420 Issue 1 APHN : Assignment of Phantom Station Number Data APHN: Assignment of Phantom Station Number Data 1. General This command assigns a phantom number for a station. 2. Precautions 1. Numbers that are being used as station or LDN numbers cannot be used as phantom numbers. 2. When an incoming call is terminated to a phantom number, either no station hunting or station hunting depending on the data in the PH parameter is performed if the called station is a member station of a hunt group. 3. A maximum of five phantom numbers can be assigned to a station. (Including individual phantom number and phantom number in a hunting group.) 4. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX8. 5. Data entry is not required in the parameters MODE and STN, since data that has already been assigned is displayed.
NDA-24298 CHAPTER 4 Page 421 Issue 1 APHN : Assignment of Phantom Station Number Data 3. Data Entry Instructions REAL STATION NUMBER (REAL STN)HUNTING CONDITION OF PHANTOM NUMBER (PH) 0/1 TENANT NUMBER (TN)PHANTOM STATION NUMBER (PHSTN) REAL STN Enter a station number PHSTN A maximum of 5 phantom station numbers can be assigned for a real station. PH 0 = Individual Phantom Number 1 = Phantom Number in a Hunting Group REAL STN The station number of the group designated in the parameter MODE0 = Individual Phantom Number 1= Phantom Number in a Hunting Group CNT = 1 PH CNT = 2 PH CNT = 3 PH CNT = 4 PH CNT = 5 1 25645 1 300 1 301 1 302 0 303 0 304 REAL STATION NUMBER (REAL STN)MODE OF REAL OR PHANTOM (MODE) 1/2TENANT NIMBER (TN)STATION NUMBER (STN) HUNTING CONDITION OF PHANTOM NUMBER (PH) 0/1PHANTOM STATION NUMBER (PHSTN) MODE This data determines how to develop the station + phantom station group. 1 = Real Mode 2 = Phantom Mode STN The station number which is designated in the parameter MODE. This data is required to specify the group. Example: When MODE = 1 is designated, assign the real station number. When MODE = 2 is designated, assign the phantom station number. PHSTN A maximum of 5 phantom stations can be assigned for a real station number. CNT = 1 PH CNT = 2 PH CNT = 3 PH CNT = 4 PH CNT = 5 25645 1 300 1 301 1 302 0 303 0 304 ♦ Assignment ♦ Display 1 1 25645 PH
CHAPTER 4 NDA-24298 Page 422 Issue 1 APHN : Assignment of Phantom Station Number Data 4. Data Sheet TENANT NUMBER (TN)REAL STATION NUMBER (REAL STN)PHANTOM STATION NUMBER (PHSTN) HUNTING CONDITION OF PHANTOM NUMBER (PH) 0/1CNT=1 PH CTN=2 PH CNT=3 PH CTN=4 PH CTN=5
NDA-24298 CHAPTER 4
Page 423
Issue 1
APHNL : Assignment of Phantom Station Number for LDM
APHNL: Assignment of Phantom Station Number for LDM
1. General
This command assigns Phantom Telephone Number (PHTELN) to Telephone Number of stations (TELN).
2. Precautions
1. The total number of Phantom Telephone Number (PHTELN) and Telephone Number for station (TELN)
can not exceeds 60,000 in a system.
2. Maximum 16 Phantom Telephone Numbers can be assigned to a Telephone Number of a station.
3. Data Entry Instructions
This parameter determines how to develop the Telephone
Number + Phantom Telephone Number group.
1 = Telephone Number
2 = Phantom Telephone NumberMODE
Kind of Phantom Telephone Number
0=Individual Phantom Telephone Number
1=Phantom Telephone Number in Hunting GroupPH MODE OF TELN
OR PHTELN
(MODE)
UGN TELN PH PHTELN 1 PH PHTELN 2 PH PHTELN 3 PH PHTELN 4
PH PHTELN 5 PH PHTELN 6 PH PHTELN 7 PH PHTELN 8
PH PHTELN 9 PH PHTELN 10 PH PHTELN 11 PH PHTELN 12
PH PHTELN 13 PH PHTELN 14 PH PHTELN 15 PH PHTELN 16USER
GROUP
NUMBER
(UGN)TELEPHONE NUMBER OR
PHANTOM TELEPHONE NUMBER
(TELN/PHTELN)
1
25645 11Maximum of 16 Phantom Telephone Numbers can be
assigned to a Telephone Number.PHTELN
Fixed to 1.UGN
The station number which is designated in the MODE
parameter. The data is required to specify the group.
• When MODE = 1 is designated, assign the Telephone
Number of a station.
• When MODE = 2 is designated, assign a Phantom
Telephone Number.TELN/PHTELN
CHAPTER 4 NDA-24298 Page 424 Issue 1 APHNL : Assignment of Phantom Station Number for LDM 4. Data Sheet MODE OF TELN OR PHTELN (MODE) UGN TELN PH PHTELN 1 PH PHTELN 2 PH PHTELN 3 PH PHTELN 4 PH PHTELN 5 PH PHTELN 6 PH PHTELN 7 PH PHTELN 8 PH PHTELN 9 PH PHTELN 10 PH PHTELN 11 PH PHTELN 12 PH PHTELN 13 PH PHTELN 14 PH PHTELN 15 PH PHTELN 16USER GROUP NUMBER (UGN)TELEPHONE NUMBER OR PHANTOM TELEPHONE NUMBER (TELN/PHTELN) 1 11 UGN TELN PH PHTELN 1 PH PHTELN 2 PH PHTELN 3 PH PHTELN 4 PH PHTELN 5 PH PHTELN 6 PH PHTELN 7 PH PHTELN 8 PH PHTELN 9 PH PHTELN 10 PH PHTELN 11 PH PHTELN 12 PH PHTELN 13 PH PHTELN 14 PH PHTELN 15 PH PHTELN 16 1 UGN TELN PH PHTELN 1 PH PHTELN 2 PH PHTELN 3 PH PHTELN 4 PH PHTELN 5 PH PHTELN 6 PH PHTELN 7 PH PHTELN 8 PH PHTELN 9 PH PHTELN 10 PH PHTELN 11 PH PHTELN 12 PH PHTELN 13 PH PHTELN 14 PH PHTELN 15 PH PHTELN 16 1 MODE UGNTELN/PHTELN 11 MODE UGNTELN/PHTELN 1 1 UGN TELN PH PHTELN 1 PH PHTELN 2 PH PHTELN 3 PH PHTELN 4 PH PHTELN 5 PH PHTELN 6 PH PHTELN 7 PH PHTELN 8 PH PHTELN 9 PH PHTELN 10 PH PHTELN 11 PH PHTELN 12 PH PHTELN 13 PH PHTELN 14 PH PHTELN 15 PH PHTELN 16 1 MODE UGNTELN/PHTELN 1 1
NDA-24298 CHAPTER 4
Page 425
Issue 1
APHNN : Assignment of Phantom Station Number for NDM
APHNN: Assignment of Phantom Station Number for NDM
1. General
This command assigns Phantom Telephone Number (PHTELN) to Telephone Number of stations (TELN) in
Fusion Network. This data assigned by this command is written in Network Data Memory (NDM) of the Net-
work Control Node (NCN), updating the NDM at each Local Node (LN).
2. Precautions
1. The total number of Phantom Telephone Number (PHTELN) and Telephone Number for station (TELN)
cannot exceeds 60,000 in a system.
2. Maximum 16 Phantom Telephone Numbers can be assigned to a Telephone Number of a station.
3. Data Entry Instructions
This parameter determines how to develop the Telephone
Number + Phantom Telephone Number group.
1 = Telephone Number
2 = Phantom Telephone NumberMODE
Kind of Phantom Telephone Number
0=Individual Phantom Telephone Number
1=Phantom Telephone Number in Hunting GroupPH MODE OF TELN
OR PHTELN
(MODE)
UGN TELN PH PHTELN 1 PH PHTELN 2 PH PHTELN 3 PH PHTELN 4
PH PHTELN 5 PH PHTELN 6 PH PHTELN 7 PH PHTELN 8
PH PHTELN 9 PH PHTELN 10 PH PHTELN 11 PH PHTELN 12
PH PHTELN 13 PH PHTELN 14 PH PHTELN 15 PH PHTELN 16USER
GROUP
NUMBER
(UGN)TELEPHONE NUMBER OR
PHANTOM TELEPHONE NUMBER
(TELN/PHTELN)
1
25645 11Maximum of 16 Phantom Telephone Numbers can be
assigned to a Telephone Number.PHTELN
Fixed to 1.UGN
The station number which is designated in the MODE
parameter. The data is required to specify the group.
• When MODE = 1 is designated, assign the Telephone
Number of a station.
• When MODE = 2 is designated, assign a Phantom
Telephone Number.TELN/PHTELN
CHAPTER 4 NDA-24298 Page 426 Issue 1 APHNN : Assignment of Phantom Station Number for NDM 4. Data Sheet MODE OF TELN OR PHTELN (MODE) UGN TELN PH PHTELN 1 PH PHTELN 2 PH PHTELN 3 PH PHTELN 4 PH PHTELN 5 PH PHTELN 6 PH PHTELN 7 PH PHTELN 8 PH PHTELN 9 PH PHTELN 10 PH PHTELN 11 PH PHTELN 12 PH PHTELN 13 PH PHTELN 14 PH PHTELN 15 PH PHTELN 16USER GROUP NUMBER (UGN)TELEPHONE NUMBER OR PHANTOM TELEPHONE NUMBER (TELN/PHTELN) 1 11 UGN TELN PH PHTELN 1 PH PHTELN 2 PH PHTELN 3 PH PHTELN 4 PH PHTELN 5 PH PHTELN 6 PH PHTELN 7 PH PHTELN 8 PH PHTELN 9 PH PHTELN 10 PH PHTELN 11 PH PHTELN 12 PH PHTELN 13 PH PHTELN 14 PH PHTELN 15 PH PHTELN 16 1 UGN TELN PH PHTELN 1 PH PHTELN 2 PH PHTELN 3 PH PHTELN 4 PH PHTELN 5 PH PHTELN 6 PH PHTELN 7 PH PHTELN 8 PH PHTELN 9 PH PHTELN 10 PH PHTELN 11 PH PHTELN 12 PH PHTELN 13 PH PHTELN 14 PH PHTELN 15 PH PHTELN 16 1 MODE UGNTELN/PHTELN 11 MODE UGNTELN/PHTELN 11 UGN TELN PH PHTELN 1 PH PHTELN 2 PH PHTELN 3 PH PHTELN 4 PH PHTELN 5 PH PHTELN 6 PH PHTELN 7 PH PHTELN 8 PH PHTELN 9 PH PHTELN 10 PH PHTELN 11 PH PHTELN 12 PH PHTELN 13 PH PHTELN 14 PH PHTELN 15 PH PHTELN 16 1 MODE UGNTELN/PHTELN 1 1