NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 687 Issue 1 AUCDN : Assignment of UCD Control Data for NDM AUCDN: Assignment of UCD Control Data for NDM 1. General This command assigns the miscellaneous data related to the Uniform Call Distribution (UCD) for Fusion Service. The data assigned on this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN). 2. Precautions 1. The UCD member station and UCD pilot (controlling station) station should be assigned by the ASHUN command. 2. This command can be specified using the following UCD related options: (a) The number of calls in UCD queuing which is used for the UCD Peg Count. (b) The threshold of the UCD Call Waiting Lamp (which is accommodated on a D term) starts to flash. (c) Denial of the MCI call result text of the call terminated to the UCD group. 3. The following data should also be assigned for UCD - Call Waiting lamp flashing: ASYD command, SYS1, INDEX 61, b5 = 1 (Call Waiting Display-UCD in Service) AKYD command, FKY = 47 (UCD Call Waiting Lamp) 4. After the data assignment, the line circuit card which contains the UCD group stations must be initialized (turn the MB key ON/OFF).
CHAPTER 4 NDA-24298 Page 688 Issue 1 AUCDN : Assignment of UCD Control Data for NDM 3. Data Entry Instructions Enter the number of calls in the UCD queue. (This value is used for UCD Peg Count.)QTH Enter the number of calls in the UCD queue. (This value is used for UCD Call Waiting Lamp on Dterm) CWT UCD QUEUING PEG COUNT VALUE (QTH ACT) 0/1UCD QUEUING PEG COUNT VALUE (QTH ) 0-255THRESHOLD VALUE OF CALL WAITING (CWT) 1-255MCI DATA TRANSFER (MCI) 0/1 USER GROUP NUMBER (UGN) UGN and TELN QTH ACT UCD queuing value (used for Peg Count) is: 0 = Invalid (QTH parameter is not assigned) 1 = Valid (QTH parameter is assigned)MCI The call record to the UCD group is transferred to MCI 0 = Valid 1 = Invalid UGN and TELN (UCD pilot station number) parameters should be assigned with respect to the data assigned by the ASHUN command. TELEPHONE NUMBER (TELN) 16 digits maximum
NDA-24298 CHAPTER 4 Page 689 Issue 1 AUCDN : Assignment of UCD Control Data for NDM 4. Data Sheet USER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN) 16 digits maximumUCD QUEUING PEG COUNT VA L U E (QTH ACT) 0/1UCD QUEUING PEG COUNT VA L U E (QTH) 0-255THRESHOLD VALUE OF CALL WAITING (CWT) 1-255MCI DATA TRANSFER (MCI) 0/1
CHAPTER 4 NDA-24298 Page 690 Issue 1 AUOG : Assignment of UCD Overflow Group AUOG: Assignment of UCD Overflow Group 1. General This command assigns the data related to the Overflow - UCD service feature. 2. Precautions 1. The UCD member station and the UCD pilot (controlling station) station should be assigned by the ASHU command. 2. The calls terminate to the designated group can overflow (forward) to another UCD group. They overflow from TN-A, STN-A to TN-B, STN-B. 3. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. 3. Data Entry Instructions STATION NUMBER (STN-A)STATION NUMBER (STN-B)REMARKS TENANT NUMBER (TN-A)TENANT NUMBER (TN-B) TN-B and STN-B TN-B and STN-B (UCD pilot station number) parameters should be assigned with respect to the data assigned by the ASHU command. TN-A and STN-A TN-A and STN-A (UCD pilot station number) parameters should be assigned with respect to the data assigned by the ASHU command. ORIGINAL UCD GROUP OVERFLOW UCD GROUP
NDA-24298 CHAPTER 4 Page 691 Issue 1 AUOG : Assignment of UCD Overflow Group 4. Data Sheet ORIGINAL UCD GROUP OVERFLOW UCD GROUP REMARKS TENANT NUMBER (TN-A)STATION NUMBER (STN-A)TENANT NUMBER (TN-B)STATION NUMBER (STN-B)
CHAPTER 4 NDA-24298 Page 692 Issue 1 AUOGL : Assignment of UCD Overflow Group for LDM AUOGL: Assignment of UCD Overflow Group for LDM 1. General This command assigns the data related to the Overflow - UCD service feature for each Node by using Telephone Number. The data is written in Local Data Memory (LDM). 2. Precautions 1. The UCD member station and the UCD pilot (controlling station) station should be assigned by the ASHUL command. 2. The calls terminate to the designated group can overflow (forward) to another UCD group. They overflow from UGN-A, TELN-A to UGN-B, TELN-B. 3. Data Entry Instructions TELEPHONE NUMBER (TELN-A)TELEPHONE NUMBER (TELN-B) USER GROUP NUMBER (UGN-A)USER GROUP NUMBER (UGN-B) UGN-B and TELN-B UGN-B and TELN-B (UCD pilot station number) parameters should be assigned with respect to the data assigned by the ASHUL command. UGN-A and TELN-A UGN-A and TELN-A (UCD pilot station number) parameters should be assigned with respect to the data assigned by the ASHUL command. ORIGINAL UCD GROUP OVERFLOW UCD GROUP
NDA-24298 CHAPTER 4 Page 693 Issue 1 AUOGL : Assignment of UCD Overflow Group for LDM 4. Data Sheet ORIGINAL UCD GROUP OVERFLOW UCD GROUP USER GROUP NUMBER (UGN-A)TELEPHONE NUMBER (TELN-A)USER GROUP NUMBER (UGN-B)TELEPHONE NUMBER (TELN-B)
CHAPTER 4 NDA-24298 Page 694 Issue 1 AUOGN : Assignment of UCD Overflow Group for NDM AUOGN: Assignment of UCD Overflow Group for NDM 1. General This command assigns the data related to the Overflow - UCD for Fusion Service. The data assigned by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN). 2. Precautions 1. The UCD member station and the UCD pilot (controlling station) station should be assigned by the ASHUN command. 2. The calls terminate to the designated group can overflow (forward) to another UCD group. They overflow from UGN-A, TELN-A to UGN-B, TELN-B. 3. Data Entry Instructions TELEPHONE NUMBER (TELN-A)TELEPHONE NUMBER (TELN-B) USER GROUP NUMBER (UGN-A)USER GROUP NUMBER (UGN-B) UGN-B and TELN-B UGN-B and TELN-B (UCD pilot station number) parameters should be assigned with respect to the data assigned by the ASHUN command. UGN-A and TELN-A UGN-A and TELN-A (UCD pilot station number) parameters should be assigned with respect to the data assigned by the ASHUN command. ORIGINAL UCD GROUP OVERFLOW UCD GROUP
NDA-24298 CHAPTER 4 Page 695 Issue 1 AUOGN : Assignment of UCD Overflow Group for NDM 4. Data Sheet ORIGINAL UCD GROUP OVERFLOW UCD GROUP USER GROUP NUMBER (UGN-A)TELEPHONE NUMBER (TELN-A)USER GROUP NUMBER (UGN-B)TELEPHONE NUMBER (TELN-B)
CHAPTER 4 NDA-24298 Page 696 Issue 1 AUAD : Assignment of UCD Delayed Announcement Data AUAD: Assignment of UCD Delayed Announcement Data 1. General This command assigns the data related to the Delay Announcement - UCD service feature. 2. Precautions 1. The UCD member station and UCD pilot (controlling station) station should be assigned by the ASHU command. 2. A maximum of eight (8) external announcement machines can be assigned per UCD group. 3. As to the designation of sharing the UCD Announcement Information (ASYD SYS 1, INDEX 70, bit 6 : 0/1 = Common/per UCD group), be sure to follow as mentioned below; In case the system data (ASYD, SYS 1, INDEX 70, bit 6) shall be modified after the UCD Announcement Information has already been assigned, first clear all the data assigned by this command (AUAD), then the new data is to be reassigned. 4. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8.