NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 877 Issue 1 AFPC : Assignment of FCCH Routing Data for Local Data Memory 4. Data Sheet Note:“USE_GATE” data is automatically set and this parameter won’t appear on the MAT display. FUSION POINT CODE (FPC) 1-253 FCCH USE OR NOT USE (FCCH) 0/1GATEWAY FUNCTION USE OR NOT USE (USE_GATE) 0/1PRIORITY ROUTE (P_ROUTE) 0/1 12345678 CONNECTION ROUTE (C_RT) 1-1023 FCCH NUMBER/FUSION POINT CODE NUMBER (FCHN/FPCN) 1-255/1-253 FUSION POINT CODE (FPC) 1-253 FCCH USE OR NOT USE (FCCH) 0/1 GATEWAY FUNCTION USE OR NOT USE (USE_GATE) 0/1PRIORITY ROUTE (P_ROUTE) 0/1 12345678 CONNECTION ROUTE (C_RT) 1-1023 FCCH NUMBER/FUSION POINT CODE NUMBER (FCHN/FPCN) 1-255/1-253 FUSION POINT CODE (FPC) 1-253 FCCH USE OR NOT USE (FCCH) 0/1 GATEWAY FUNCTION USE OR NOT USE (USE_GATE) 0/1PRIORITY ROUTE (P_ROUTE) 0/1 12345678 CONNECTION ROUTE (C_RT) 1-1023 FCCH NUMBER/FUSION POINT CODE NUMBER (FCHN/FPCN) 1-255/1-253 FUSION POINT CODE (FPC) 1-253 FCCH USE OR NOT USE (FCCH) 0/1 GATEWAY FUNCTION USE OR NOT USE (USE_GATE) 0/1PRIORITY ROUTE (P_ROUTE) 0/1 12345678 CONNECTION ROUTE (C_RT) 1-1023 FCCH NUMBER/FUSION POINT CODE NUMBER (FCHN/FPCN) 1-255/1-253
CHAPTER 4 NDA-24298 Page 878 Issue 1 AETH : Assignment of External Router Connection Routing Data for LDM AETH: Assignment of External Router Connection Routing Data for LDM 1. General This command is used to assign/delete routing data in case the data is transferred via external router. 2. Precautions None. 3. Data Entry Instructions Note:“USE_GATE” data is automatically set and this parameter won’t appear on the MAT screen DESTINATION FPC (FPC) 1-253GATEWAY USING FLAG (USE_GATE) 0/1FCCH NUMBER (FCHN) 1-255CONNECTION ROUTE (C_RT) 1-1023DESTINATION IP ADDRESS (DST_IP)NEXT IP ADDRESS (NEXT_IP) DST_IP USE_GATE 0 = Not use the Gateway function 1 = Use the Gateway function NoteFCHN Enter the FCH assigned at AFCH command. C_RT Enter the connection route number of speech channel. NEXT_IPEnter the IP address of FGH/IPTRK mounted on the destination node. The data is input in decimal on MAT display.Enter the IP address of FGH/IPTRK mounted on the intermediary node. The data is input in decimal on MAT display.
NDA-24298 CHAPTER 4 Page 879 Issue 1 AETH : Assignment of External Router Connection Routing Data for LDM 4. Data Sheet DESTINATION FPC (FPC) 1-253GATEWAY USING FLAG (USE_GATE) 0/1FCCH NUMBER (FCHN) 1-255CONNECTION ROUTE (C_RT) 1-1023DESTINATION IP ADDRESS (DST_IP)NEXT IP ADDRESS (NEXT_IP)
CHAPTER 4 NDA-24298
Page 880
Issue 1
ACAN : Assignment of CIC Number Between Adjacent Nodes for Local Data Memory
ACAN: Assignment of CIC Number Between Adjacent Nodes for
Local Data Memory
1. General
This command assigns LENS and Fusion Circuit Identification Code (Fusion CIC) numbers on the basis of each
Fusion Point Code (FPC).
2. Precautions
1. Before executing this command, confirm that the following assignments have already been completed:
(a) LSG: 12 (the ACRD command) is assigned to the B-channel Route to which the Fusion CIC belongs.
(b) The trunk data for the Fusion CIC is assigned using the ACTK command.
2. The FCIC given to each B-channel should be identical to the originating node and its adjacent node.
3. The available FCIC (Fusion CIC Number) is 1-4095.
4. For detailed information, see the NEAX2400 IPX Fusion Network System Manual.
3. Data Entry Instructions
FUSION POINT CODE
(FPC)
1-253REMARKS
FPC
FPC is a unique number
allotted to each node.
Assign FPC of the adjacent node
to this parameter.Fusion CIC number of
the adjacent node
10
10
10FUSION CIC NUMBER
(FCIC)
1-4095
0
0
00
0
00
0
00
0
01
1
10
1
21
2
3CONNECTION EQUIPMENT
NUMBER (C_LENS)
FCICC_LENS
LENS of the trunk for B-channel
assigned by the ACTK command
NDA-24298 CHAPTER 4 Page 881 Issue 1 ACAN : Assignment of CIC Number Between Adjacent Nodes for Local Data Memory 4. Data Sheet FUSION POINT CODE (FPC) 1-253FUSION CIC NUMBER (FCIC) 1-4095CONNECTION EQUIPMENT NUMBER (C_LENS)REMARKS
CHAPTER 4 NDA-24298
Page 882
Issue 1
AFRT : Assignment of FCCH Controlled Connection Route Data for Local Data Memory
AFRT: Assignment of FCCH Controlled Connection Route Data for
Local Data Memory
1. General
This command assigns the connection route controlling connection trunks for each FCCH number.
2. Precautions
1. Before executing this command, confirm that the following assignments have already been completed:
(a) The FCCH number has been assigned by the AFCH command.
(b) The Connection Route data has been assigned by the ACRD command.
2. The maximum alternative connection routes for one FCHN (FCCH No.) is 8.
3. For detailed information, see the NEAX2400 IPX Fusion Network System Manual.
3. Data Entry Instructions
FCCH NUMBER (FCHN)
1-255FCHN
A unique number allocated to
the FCH card at each node
C_RT
Connection Route assigned for B-channel
by the ACRD command.
CONNECTION ROUTE (C_RT) 1-1023
12 34 5678
NDA-24298 CHAPTER 4 Page 883 Issue 1 AFRT : Assignment of FCCH Controlled Connection Route Data for Local Data Memory 4. Data Sheet FCCH NUMBER (FCHN) 1-255CONNECTION ROUTE (C_RT) 1-1023 12345678
CHAPTER 4 NDA-24298
Page 884
Issue 1
AGIP : Assignment of Default Gateway IP Address Data for LDM
AGIP: Assignment of Default Gateway IP Address Data for LDM
1. General
This command is used under FGH controlling to assign/delete the IP address allocated to FGH and IP address
of the Router dedicated to FGH.
2. Precautions
1. Enter the LENS data of FGH/IPTRK card, and the existing data is displayed by clicking “Get” button if
already assigned. If no data has allocated to the input LENS, assign the data like IP address, Net Mask,
etc.
2. It can’t be executed to modify the existing data by this command. First delete the existing data, then reas-
sign the new data.
3. Data Entry Instructions
(a) When “KIND=FGH” is selected:
KIND OF
SELECTION
(KIND) LINE
EQUIPMENT
NUMBER
(LENS)
MG U G
FGHFGH IP
ADDRESS
(FGH_IP)IP
ADDRESS
FOR
DEFAULT
GATEWAY
(DG_IP)NET
MASK
OF IP
ADDRESS
(NETMSK)FRAME
TYPE
OF
ARP
(ARP) VOICE
CHANNEL
CONTROL
TYPE
(CONTTYP)QSIG-PRIME
LINK
NUMBER
(LINK_NUM)
0-32CLIENT/SERVER
CONNECTION
MAX. NUMBER
(CSLINK_NUM)
KIND
Select “FGH”.
LENS
Enter the Line Equipment Number of the
FGH card. The existing data can be read
out by pressing the “Get” button.CONTTYP
Select either, CLIENT
or SERVER
CSLINK_NUM
Select the maximum number of
client/server connections.
16 line (default)
4 line 8 line 16 line
24 line 32 line 64 line
Select the Frame type of ARP, when
“Detail” check box is checked.
IEEE
DIX (standard setting)ARP
Enter the IP address of the router.DG_IP
0-32 = QSIG Prime LinkLINK_NUM
NDA-24298 CHAPTER 4
Page 885
Issue 1
AGIP : Assignment of Default Gateway IP Address Data for LDM
(b) When “KIND=IPTRK (CCIS)” is selected:
KIND OF
SELECTION (KIND) LINE
EQUIPMENT
NUMBER
(LE N S)
MG U G
IPTRK (CCIS)
IP ADDRESS
OF IPTRK
(IPTRKIP)IP ADDRESS
OF DEFAULT
GATEWAY
(D G _IP)NET MASK
OF IP
ADDRESS
(NETM SK)QoS
CONTROLQoS DATA
FOR SIGNAL
ROUTE
(Q oS 1)
0-7/0x00-0x3FQoS DATA
FOR SPEECH
PATH
(Q oS 2)
0-7/0x00-0x3F
KIND
Select IPTRK (CCIS).
LENSEnter the Line Equipment Number of IPTRK card. The
existing data can be read out by pressing the Get button.
QoS CONTROLSelect the either,
IP Precedence/DiffServ0-7: When IP Precedence is selected.
0x00-0x3F: When DiffServ is selected.
QoS 1/2
Enter the IP address of the router.DG_IP
KIND OF
MULT CONNECTION (M U LT)
PVC/SVC
123 45678 IP ADDRESS
OF
DESTINATION
IPTRK
(D STIP)NETWORK
ID
(N E TID )
0-15 INCOMING ROUTE
(IR T)FRAME
TYPE OF
ARP
(ARP)CLIENT/SERVER
CONNECTION
MAX. NUMBER
(CSLINK_NUM)
MULTPoint to Point
Point to Multipoint
IR TMaximum 8 routes can be assigned.
(This parameter appears only when MULT=Point to Multi.)
CSLINK_NUMSelect the maximum number of
client/server connections.
16 line 4 line
8 line 16 line (default)
24 line 32 line 64 line
Select the Frame type of ARP, when
Detail check box is checked.
IEEE
DIX (standard setting)
ARP
Enter the IP address of destination IPTRK.
(This parameter appears only when
MULT=Point to Point .)DSTIP
Note
CHAPTER 4 NDA-24298
Page 886
Issue 1
AGIP : Assignment of Default Gateway IP Address Data for LDM
(b) When “KIND=IPTRK (CCIS)” is selected (Continued):
RTP PKTLOSS JIT_MAX JIT_MIN MNGS JIT_COUNT JIT_FAST TIME_FASTBASE_COUNT
RTP
Check the “RTP” check box for detail assignment. (Usually default data “0” is set for all the parameters.)
PKGLOSS: Amount of Packet Loss [0%-100%]
JIT_MAX: Maximum Jitter Buffer [0-60 × 10ms]
JIT_MIN: Minimum Jitter Buffer [0-60 × 10ms]
MNGS: Interval of Jitter adjustment [0-255 times]
JIT_COUNT: Interval of Jitter statistics [0-255 second]
BASE_COUNT: Interval of Time-base correction [0-255 second]
JIT_FAST: Judging rate of fast arrived packet [0-100%]
TIME_FAST: Time-base correction Judgment [0-100%]