NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 367 Issue 1 ARRC : Assignment of Alternative Route Restriction ARRC: Assignment of Alternative Route Restriction 1. General This command is used to accomplish trunk tandem connection. 2. Precautions 1. The ASTD command is also required to access trunk tandem connections including C.O. Line. 2. When data “2 (Toll Restriction is required)” is assigned at the ARI-D_RES parameter, the ATDP command designates the connection allowed area (office) code. 3. The following table shows the applicable data assignment of ARI-A_RES and ARI-D_RES parameter. 3. Data Entry Instructions ARI-A_RES ARI-D_RESTandem connection with operator assistanceTandem connection without operator assistance 0 0 Restricted Restricted 1 0 Allowed Restricted 1 1 Allowed Allowed 1 2 AllowedDepend on ATDP/AARP assignment 01 This data assignment is not applicable. 02 INCOMING LOGICAL ROUTE NUMBER (ICRT) 1-255OUTGOING LOGICAL ROUTE NUMBER (OGRT) 1-255ARI-A_RES 0/1ARI-D_RES 0-2REMARKS Tandem connection with an operator/station assistance 0 = Restricted 1 = AllowedARI-A_RES Tandem connection without an operator/station assistance 0 = Restricted 1 = Allowed 2 = Toll (Conditional) restriction is requiredARI-D_RES
CHAPTER 4 NDA-24298 Page 368 Issue 1 ARRC : Assignment of Alternative Route Restriction 4. Data Sheet INCOMING ROUTE NUMBER (ICRT)OUTGOING ROUTE NUMBER (OGRT)(ARI-A_RES) 0/1(ARI-D_RES) 0 - 2REMARKS
NDA-24298 CHAPTER 4 Page 369 Issue 1 ARRCN : Assignment of Alternative Route Restriction for NDM ARRCN: Assignment of Alternative Route Restriction for NDM 1. General This command establishes trunk tandem connection (Logical route to Logical route via the Fusion network). This data is written in the NDM of the NCN. 2. Precautions 1. The ASTD command is also required to access trunk tandem connections including C.O. Line. 2. When data “2 (Toll Restriction is required)” is assigned at the ARI-D_RES parameter, the ATDPN command designates the connection allowed area (office) code. 3. The following table shows the applicable data assignment of ARI-A_RES and ARI-D_RES parameter. 3. Data Entry Instructions ARI-A_RES ARI-D_RESTandem connection with operator assistanceTandem connection without operator assistance 0 0 Restricted Restricted 1 0 Allowed Restricted 1 1 Allowed Allowed 1 2 AllowedDepend on ATDPN/AARPN assignment 01 This data assignment is not applicable. 02 INCOMING LOGICAL ROUTE NUMBER (ICRT) 1-255OUTGOING LOGICAL ROUTE NUMBER (OGRT) 1-255ARI-A_RES 0/1ARI-D_RES 0-2REMARKS Tandem connection with an operator/station assistance 0 = Restricted 1 = AllowedARI-A_RES Tandem connection without an operator/station assistance 0 = Restricted 1 = Allowed 2 = Toll (Conditional) restriction is requiredARI-D_RES
CHAPTER 4 NDA-24298 Page 370 Issue 1 ARRCN : Assignment of Alternative Route Restriction for NDM 4. Data Sheet INCOMING LOGICAL ROUTE NUMBER (ICLGRT) 1-899OUTGOING LOGICAL ROUTE NUMBER (OGLGRT) 1-899(ARI-A_RES) 0/1(ARI-D_RES) 0 - 2REMARKS
NDA-24298 CHAPTER 4 Page 371 Issue 1 ATDP : Assignment of Toll Code Restriction Data ATDP: Assignment of Toll Code Restriction Data 1. General This command assigns the area code of Toll Restriction - 3/6 digits for both an outgoing connection and a tandem connection. 2. Precautions 1. This command is used when restriction data is assigned to RES = 2 (Toll Restriction is required) in the ARSC command or in the ARRC command. 2. The office code following the area code assigned on this command can also be specified by AARP command. 3. Setting Method of Area and Office Code Restriction In case the number to be dialed is as shown above. (a) 3-Digit Toll Restriction 9 - 1 - NPA - Nxx - xxxx A 3-digit toll restriction is a restriction that is to be executed by developing the contents (NPA in this case) of the digits that follow the toll code. If the data is set as follows, a toll call can be restricted by developing NPA. At Toll Code Restriction Data (ATDP) DC = 9-1, TDI = 2, NND = 3 (NPA) At Area & Office Code Data (AARP) DC = NPA (Only 3 digits) TRK AC C CODETOLL CODEAREA CODEOFFICE CODESTATION NUMBER 9–1–NPA–Nxx–xxxx
CHAPTER 4 NDA-24298 Page 372 Issue 1 ATDP : Assignment of Toll Code Restriction Data (b) 6-Digit Toll Restriction 9 - 1 - NPA - Nxx - xxxx A 6-digit toll restriction is a restriction that is to be executed by developing the contents (NPA - Nxx in this case) of the 6 digits that follow the toll code. If data is set as follows, a toll call can be restricted by developing NAP - Nxx. At Toll Code Restriction Data (ATDP) DC = 9-1, TDI = 2, NND = 6 (NPA - Nxx) At Area & Office Code Data (AARP) DC = NAP - Nxx (6 digits) 4. Data can be entered on a Day/Night basis, if specified in ASYD command, SYS 1, INDEX 75, Bit 3=1. 5. The rest of the parameter appearance depends on the data entered in TDM/OG parameter.
NDA-24298 CHAPTER 4 Page 373 Issue 1 ATDP : Assignment of Toll Code Restriction Data 3. Data Entry Instructions ♦ Tandem Switching TANDEM/ OUTGOING CONNECTION (TDM/OG)DAY/NIGHT MODE (DAY/NIGHT)INCOMING ROUTE NUMBER (ICRT)OUTGOING ROUTE NUMBER (OGRT)DESTINATION (AREA) CODE (DC) MAX. 11 DIGITSNECESSARY DIGIT (NND) 1-12 RESTRICTION DATA (TDI) 0-3 1 = Tandem Connection 2 = Outgoing Connection TDM/OG DAY/NIGHT D = Day Mode N = Night Mode TDI Restriction Data 0 = Connection is Restricted 1 = Connection is Allowed 2 = 3/6 Digit Toll Restriction 3 = C.O. Operator Call (9+0) When assigning DC, the digits including the access code must be assigned. NND This parameter is available only when TDI=2 NND This parameter is available only when TDI=2 1 TANDEM/ OUTGOING CONNECTION (TDM/OG)DAY/NIGHT MODE (DAY/NIGHT)RESTRICTION CLASS (RSC) 0-15OUTGOING ROUTE NUMBER (OGRT)DESTINATION (AREA) CODE (DC) MAX. 11 DIGITSNECESSARY DIGIT (NND) 1-12 RESTRICTION DATA (TDI) 0-3 2 ♦ Outgoing Connection 1 = Tandem Connection 2 = Outgoing Connection TDM/OG DAY/NIGHT D = Day Mode N = Night Mode TDI 0 = Connection is Restricted 1 = Connection is Allowed 2 = 3/6 Digit Toll Restriction 3 = C.O. Operator Call (9+0) When assigning DC, the digits including the access code must be assigned.Refer to the ARSC command.
CHAPTER 4 NDA-24298 Page 374 Issue 1 ATDP : Assignment of Toll Code Restriction Data 4. Data Sheet (a) Tandem Connection (TDM/OG = T/O) TANDEM/ OUTGOING T/ODAY/ NIG HT MODE (DAY/NIGHT) D/NINCOMING ROUTE NUMBER (ICRT)OUTGOING ROUTE NUMBER (OGRT)DESTINATION (AREA) CODE (DC) MAXIMUM 11 DIGITSRESTRICTION DATA (TDI) 0 – 3 1
NDA-24298 CHAPTER 4 Page 375 Issue 1 ATDP : Assignment of Toll Code Restriction Data (b) Outgoing Connection (TDM/OG = 2) TANDEM/ OUTGOING (TDM/OG)DAY/NIGHT MODE (DAY/NIGHT) 1/2ROUTE RESTRICTION NUMBER (RSC) 0 – 15OUTGOING ROUTE NUMBER (OGRT)DESTINATION (AREA) CODE (DC) MAX. 11 DIGITSRESTRICTION DATA (TDI) 0 – 3 2
CHAPTER 4 NDA-24298 Page 376 Issue 1 ATDPL : Assignment of Toll Code Restriction Data for LDM ATDPL: Assignment of Toll Code Restriction Data for LDM 1. General This command assigns the area code of Toll Restriction - 3/6 digits for an outgoing connection. This data is written in Local Data Memory (LDM). When using common Toll Code Restriction data in Fusion Network, assign this data via the ATDPN command. 2. Precautions 1. This command is used when restriction data is assigned to RES = 2 (Toll Restriction is required) in the ARSCL command or in the ARRCL command. 2. The office code following the area code assigned on this command can also be specified by the AARPL (LDM)/AARPN (NDM) command. 3. Setting Method of Area and Office Code Restriction In case the number to be dialed is as shown above. (a) 3-Digit Toll Restriction 9 - 1 - NPA - Nxx - xxxx A 3-digit toll restriction is a restriction that is to be executed by developing the contents (NPA in this case) of the digits that follow the toll code. If the data is set as follows, a toll call can be restricted by developing NPA. At Toll Code Restriction Data for LDM (ATDPL) DC = 9-1, TDI = 2, NND = 3 (NPA) At Area & Office Code Data (AARPL) DC = NPA (Only 3 digits) (b) 6-Digit Toll Restriction 9 - 1 - NPA - Nxx - xxxx A 6-digit toll restriction is a restriction that is to be executed by developing the contents (NPA - Nxx in this case) of the 6 digits that follow the toll code. TRK AC C CODETOLL CODEAREA CODEOFFICE CODESTATION NUMBER 9–1–NPA–Nxx–xxxx