NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 427 Issue 1 ANDD : Assignment of Name Display Data ANDD: Assignment of Name Display Data 1. General This command assigns user information (user’s name) onto a Station to program the Name Display - System service feature. 2. Precautions 1. The Name Display - System service feature allows a D term with LCD to show the user information that corresponds to the calling station number while it is engaged in a station-to-station call. 2. The following must be set in the ASYD command SYS1, INDEX78, b5 = 1 (Name Display service). 3. The number of digits to be assigned to the parameter NAME is determined by ASYD command, SYS1, INDEX241, b1=0/1: 8 characters/16 characters. Multi-Line service is not available if “16 characters” is selected. 4. This command cannot be used for Name Display - OAI service. 5. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8. 3. Data Entry Instructions TENANT NUMBER (TN)STATION NUMBER (STN)IDENTIFYING INFORMATION (NAME) 8 or 16 CHARACTERSREMARKS Enter desired alphanumeric character.NAME
CHAPTER 4 NDA-24298 Page 428 Issue 1 ANDD : Assignment of Name Display Data 4. Data Sheet TENANT NUMBER (TN) STATION NUMBER (STN)IDENTIFYING INFORMATION (NAME) 8 or 16 CHARACTERSREMARKS
NDA-24298 CHAPTER 4 Page 429 Issue 1 ANDD_T : Assignment of Name Display Data – Telephone Number ANDD_T : Assignment of Name Display Data – Telephone Number 1. General This command is used to assign user information (user’s name) onto a Station to program the Name Display - System service feature. The station data of ANDD command can be assigned by using Telephone Number. 2. Precautions 1. Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the ALGSL command is not available in this command. 2. In case logging in to a LN, only the Telephone Numbers allocated to the stations within the logged-in node can be used in this command. Also, when logging in to the NCN, the data memory of the whole nodes in the network can be written. 3. The Name Display - System service feature allows a D term with LCD to show the user information that corresponds to the calling station number while it is engaged in a station-to-station call. 4. The ASYD command SYS1, INDEX78, b5=1 (Name Display service) must be set. 5. The number of digit to be assigned to the parameter NAME is determined by the ASYD command, SYS1, INDEX241, b1=0/1: 8 characters/16 characters. Multi-Line service is not available if “16 characters” is selected. 6. This command cannot be used for Name Display - OAI service. 7. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX 8. 8. This command is an available software enhancement. 3. Data Entry Instruction Note:The existing data can be readout by pressing “Get” button after UGN and TELN data is entered. USER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN) Max. 16 digitsNAME DISPLAY INFORMATION (NAME) 8 or 16 charactersREMARKS TELN Enter the Telephone Number of the station to which Name Display service is to be applied. NAME Enter desired alphanumeric characters.
CHAPTER 4 NDA-24298 Page 430 Issue 1 ANDD_T : Assignment of Name Display Data – Telephone Number 4. Data Sheet USER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN) Max. 16 digitsIDENTIFYING INFORMATION (NAME) 8 or 16 charactersREMARKS
NDA-24298 CHAPTER 4 Page 431 Issue 1 ALGNL : Assignment of Telephone Number Data for LDM ALGNL: Assignment of Telephone Number Data for LDM 1. General This command assigns the individual attendant identification number (Telephone Number) available in the self (local) node only. 2. Precautions 1. This individual attendant identification number is available in the self (local) node only. If the individual attendant identification number for the Fusion network is required, use the ALGNN command. 2. The system data assignment (ASYDL, SYS1, INDEX513 Data 01hex) is needed to provide the Local Data Memory (LDM). 3. Before assigning this command, the ANPDL/ASPAL commands are required for the numbering plan of Telephone Number. 4. A unique Telephone Number (TELN) should be given within a User Group Number (UGN). 3. Data Entry Instructions TELEPHONE STATION NUMBER (TELN) MAX. 16 DIGITSREMARKS USER GROUP NUMBER (UGN) TELN Assign Telephone Number (Unique TELN should be given within a UGN) UGN 1 = User Group Number 1 (Fixed) 1 1 1 1
CHAPTER 4 NDA-24298 Page 432 Issue 1 ALGNL : Assignment of Telephone Number Data for LDM 4. Data Sheet USER GROUP NUMBER (UGN)TELEPHONE STATION NUMBER (TELN) MAX. 16 DIGITSREMARKS
NDA-24298 CHAPTER 4 Page 433 Issue 1 ALGSL : Allocation of Telephone Station Data for LDM ALGSL: Allocation of Telephone Station Data for LDM 1. General This command assigns the data pertaining to the relationship between Telephone Station Number (TELN) and the physical station. 2. Precautions 1. This Telephone Number can be used in the self (local) node only. Use the ALGSN command if the Telephone Number for the Fusion network is required. 2. The TYPE parameter designates the programming method of the physical station. (The result is the same whichever method is selected.) When TYPE = 1 (LENS) is selected, the physical station which accommodates the Telephone Station Number (TELN) is specified by the LENS. When TYPE = 2 (STN) is selected, the physical station number (STN) is used. 3. The system data assignment (ASYDL, SYS1, INDEX513 Data 01 Hex) is needed to provide the Local Data Memory (LDM). 4. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX8. If data in this command is common for all tenants (ASYDL command, SYS 1, INDEX 800, bit0 = 1), assign TN parameter as data “1” for all tenants.
CHAPTER 4 NDA-24298 Page 434 Issue 1 ALGSL : Allocation of Telephone Station Data for LDM 3. Data Entry Instructions TELEPHONE STATION NUMBER (TELN) MAX. 16 DIGITSLINE EQUIPMENT NUMBER (LENS) USER GROUP NUMBER (UGN) UGN TYPE 1 = User Group Number 1 (Fixed) LENS LENS of the physical stationTYPE 1 = LENS is used to specify the Telephone station number 2 = STN is used to specify the Telephone station number 1 1 1 1 1 1 LSTN Telephone station number assigned by the ALGNL command ♦ TYPE = 1 (LENS is used to specify the Telephone station number.) TELEPHONE STATION NUMBER (TELN) MAX. 16 DIGITSSTATION NUMBER (STN) TENANT NUMBER (TN) USER GROUP NUMBER (UGN) UGN TYPE 1 = User Group Number 1 (Fixed) STN Station number of the physical stationTYPE 1 = LENS is used to specify the Telephone station number 2 = STN is used to specify the Telephone station number 1 1 2 2 TN TELN Telephone station number assigned by the ALGNL ♦ TYPE = 2 (STN is used to specify the Telephone station number.) Tenant number of the physical station
NDA-24298 CHAPTER 4 Page 435 Issue 1 ALGSL : Allocation of Telephone Station Data for LDM 4. Data Sheet (a) TYPE = 1 (LENS is used to specify the physical station number.) TYPEUSER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN)LINE EQUIPMENT NUMBER (LENS)REMARKS 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11
CHAPTER 4 NDA-24298 Page 436 Issue 1 ALGSL : Allocation of Telephone Station Data for LDM (b) TYPE = 2 (STN is used to specify the physical station number.) TYPEUSER GROUP NUMBER (UGN)TELEPHONE NUMBER (TELN)TENANT NUMBER (TN)STATION NUMBER (STN)REMARKS 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21