Home > NEC > Communications System > NEC Neax 2400 Ipx Office Data Specification

NEC Neax 2400 Ipx Office Data Specification

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1020
    Add page 871 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 837
Issue 1
AREF_LR : Assignment of Reference Number Information Data – Logical Route Number
AREF_LR: Assignment of Reference Number Information Data – Logical 
Route Number
1. General
This command is used to assign Reference Number for ISDN feature. Route number of the AREF command can
be assigned by using Logical Route.
2. Precautions
1. Prior to this command, logical route data must be allocated by using the ALRTN command.
2. Only when logging in to the NCN (Network Control Node), this command can be used to assign the data
of self-Node and the other Nodes in the Fusion Network. If logging in to a LN (Local Node), data setting
only for the self-node is available.
3. Data Entry Instructions
This parameter appears when logging in to the NCN only. Enter the
FPC of the target Node. After FPC and REF data is designated, the 
existing data can be read out by clicking “Get” button.
REMARKSREFERENCE NUMBER
(REF)
MAX.18 DIGITS [0-9, *, #]OUTSIDE
ROUTE
NUMBER
(RT) 
         LOGICAL
ROUTE
NUMBER
(LGRT) 
1-899
        FUSION
POINT
CODE
(FPC)
1-253
        TRUNK
NUMBER
(TK)
1-255
 
        
REF
Enter the specified Reference Number
within 18 digits.
FPC
    Add page 872 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 838
Issue 1
AREF_LR : Assignment of Reference Number Information Data – Logical Route Number
4. Data Sheet
FUSION
POINT
CODE
(FPC)
1-253REFERENCE NUMBER
(REF)
 MAX. 18  DIGITS [0-9, *, #]LOGICAL
ROUTE
NUMBER
(LGRT)
1-899OUTSIDE
ROUTE
NUMBER
(RT)TRUNK
NUMBER
(TK)
1-255REMARKS
    Add page 873 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 839
Issue 1
AVTC : Assignment of Virtual Tie Line Call Data
AVTC: Assignment of Virtual Tie Line Call Data
1. General
This command assigns Virtual Tie Line Numbers to be used in Virtual Tie Line Service.
2. Precautions
1. This data is to be assigned at the terminating office.
2. A Virtual Tie Line Number is a station number converted, as a number for Virtual Tie Line Service, from
one of the subscriber numbers assigned on the ISDN line. 
3. Data Entry Instructions
Refer to data sheet in Section 4.
    Add page 874 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 840
Issue 1
AVTC : Assignment of Virtual Tie Line Call Data
4. Data Sheet
TENANT
NUMBER 
(TN)STATION NUMBER 
(STN) REMARKS
    Add page 875 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 841
Issue 1
AVTL : Assignment of Virtual Tie Line Data
AVTL: Assignment of Virtual Tie Line Data
1. General
This command assigns a schedule for Virtual Tie Line implementation period in Virtual Tie Line Service.
2. Precautions
1. At the time of data setting, assign incoming/outgoing call data synchronously.
2. The maximum input value for Route Number should be the value assigned by ASYD.
After entering the Route Number, check to see if the corresponding Route Data is assigned. If not assigned,
ERROR Number (ERR = 0019) is displayed.
Of the Route Class Data, the B-Channel Route is valid only when LSG = 12, and the D-Channel Route is
valid only when LSG = 13.
3. Virtual Tie Line service is valid only within the time period designated by the Time Range on the days
designated by the Week Range in the period designated by the Date Range.
Example:
DATE: 09/01-09/30
WEEK: MON-FRI
TIME: 8:30-17:30
In the case of the above designation, Virtual Tie Line service is valid from 8:30 through 17:30 from Monday
through Friday of every week starting from September 1st through September 30th.
4. The entry range (DATE) of the Date Range is within one year.
Example:
01/01-12/31: One year from January 1st to December 31st. 
12/01-11/30:  One year from December 1st to November 30th of the following year.
5. The Week Range is entered as follows. 
Example:
MON-FRI:  Five days from Monday to Friday.
SAT-SUN:  Two days from Saturday to Sunday.
MON-MON:  One day if the same Monday is designated.
Example:Designation in reverse direction
MON-SUN:  Seven days when going back by one week.
TUE-SUN:  Six days when going back by two weeks.
SAT-WED:  Five days when going back by three weeks.
    Add page 876 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 842
Issue 1
AVTL : Assignment of Virtual Tie Line Data
6. When the Date Range is one day, only the starting week is displayed. The relationship between the Date
Range and the Week Range is as follows:
Example:
DATE:  11/08 - 11/22
WEEK:  MON-WED
In a case where 11/08 is Wednesday and 11/22 is Wednesday two weeks after, in the designated Date
Range, 8th is the first Monday. 13th through 15th are Monday through Wednesday of next week, and
20th through 22nd are Monday through Wednesday of the week after next. These seven days are the
subject for processing.
7. The Time Range cannot be designated when the end time is earlier than the start time.
Example:
00:10 - 20:00  From 0:10 to 19:59
05:20 - 05:30  From 5:20 to 5:29
10:10 - 09:10  Cannot be designated
10:50 - 10:10  Cannot be designated
3. Data Entry Instructions
KIND OF
TIE LINE
(TL/SPC)
    T/S
CALLING NUMBER
      (CALLING)
   MAX. 24 DIGITS CALLED NUMBER 
         (CALLED)
   MAX. 24 DIGITS
DATE
(MONTH)
(DAY)PATTERN
NUMBER
   (PTN)
    0-15INCOMING/
OUTGOING
    (IC/OG)
       I/OOUTSIDE
 ROUTE
NUMBER
    (RT)  TRUNK
NUMBER
(TK)LENS OF Dch
    (D-LENS)Bch NUMBER
       (CH)
   6/12/18/24
TIME RANGE
  START
    TIME
(SH) : (SM)
:
::
: END TIME
(EH) : (EM) SUB ADDRESS
     (SUB NO)
MAX.12 DIGITS KIND OF
SUB
ADDRESS
  (SUB)
  0/1   KEYPAD
INFORMA-
   TION
(KEYPAD)
     0/1
TL/SPC
IC/OG
KEYPAD
SUB
1 = Out of  service
2 = In service1 = Not assigned
2 = Assigned T = Time Link
S = Semi Permanent ConnectionI = Incoming
O = Outgoing
    Add page 877 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 843
Issue 1
AVTL : Assignment of Virtual Tie Line Data
4. Data Sheet
KIND OF 
TIE LINE
(TL/SPC)
T/SDAT E PATT E RN
 NUMBER
(PTN)
0-15INCOMING/
OUTGOING
(OG/IC)
O/IOUTSIDE
ROUTE 
NUMBER
(RT)TRUNK 
NUMBER
(TK)LENS OF Dch
(D-LENS)Bch NUMBER
(CH)
6/12/18/24 (MONTH) (DAY)
    Add page 878 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 844
Issue 1
AVTM : Assignment of Virtual Tie Line Manual
AVTM: Assignment of Virtual Tie Line Manual
1. General
This command immediately activates Virtual Tie Line.
2. Precautions
This command is used in the following conditions:
When a failure occurs in a Virtual Tie Line, causing a link release.
When Virtual Tie Line is needed immediately.
3. Data Entry Instructions
Enter a “Y” for Yes, or a “N” for No.
Y = Activate
N = Not activate
    Add page 879 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 845
Issue 1
AEVT : Assignment of Virtual Tie Line Data for Event Based CCIS
AEVT: Assignment of Virtual Tie Line Data for Event Based CCIS
1. General
This command assigns Virtual Tie Line data for Event Based CCIS.
2. Precautions
1. When the parameter Verification of Connection (VRY) is assigned as “1,” if the Calling party number is
not the same as the number assigned in the parameter CALLED, connection is not established.
2. The parameter FUNC = 2 is necessary to activate Event Based CCIS using the private ISDN line.
3. Data Entry Instructions
TYPE
1=Separate Channel System
2=Separate Channel System (for Call-By-Call)
3=Common Channel System
4=Common Channel System (When NPI and
    TON are assigned by the ACBC command)
DESTINATION
E-CCIS trunk
identification number.
OPR  Note
Assign Outgoing Route
Selection pattern number.RA Note
Assign the order of
route advancing.
CALLED
CALLED NUMBER
(CALLED)
1-24CCIS_RT
1-255CCIS_TK
1-255VRY
0/1OPR
1-4000RA
0-7 DID number for
outgoing call
CALLING
DID number for incoming
call from an E-CCIS
CCIS_RT/CCIS_TK
Assign CCIS signal route and
trunk number.VRY
Verification of connection 
0=Not required
1=Required
Note:
♦ When FUNC=1 and TYPE=1/2 are assigned
 OPR and RA parameters appear for TYPE=2.
FUNCTIONROUTE
NUMBER
(RT)
1-255TRUNK
NUMBER
(TK)
1-255DESTINATION
NUMBER
(DESTINATION)
6 DIGITSCALLING NUMBER
(CALLING)
1-24 TYPE
1-4
1
    Add page 880 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 846
Issue 1
AEVT : Assignment of Virtual Tie Line Data for Event Based CCIS
TYPE
1=Separate Channel System
2=Separate Channel System (for Call-By-Call)
3=Common Channel System
4=Common Channel System (When NPI and
    TON are assigned by the ACBC command)
DESTINATION
E-CCIS trunk
identification number.
OPR  Note
Assign Outgoing Route
Selection pattern number.RA Note
Assign the order of
route advancing.
TK
Fixed “0”.
CALLED
CALLED NUMBER
(CALLED)
1-24ISDN_RT
1-255VRY
0/1OPR
1-4000RA
0-7 DID number for
outgoing call
CALLING
DID number for incoming
call from an E-CCIS
ISDN_RT
Assign ISDN Dchs route
VRY
Verification of connection 
0=Not required
1=Required
Note:
♦ When FUNC=1 and TYPE=3/4 are assigned
 OPR and RA parameters appear for TYPE=4.
FUNCTIONROUTE
NUMBER
(RT)
1-255TRUNK
NUMBER
(TK)DESTINATION
NUMBER
(DESTINATION)
6 DIGITSCALLING NUMBER
(CALLING)
1-24 TYPE
1-4
10
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Ipx Office Data Specification