NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 597 Issue 1 ATGLL : Assignment of Trunk Group Busy Lamp Data for LDM 4. Data Sheet ATTENDANT NUMBER (ATN)TRUNK GROUP BUSY LAMP NUMBER (TGN) 1-10LOGICAL ROUTE NUMBER (LGRT) 1-899LGRT DATA (DATA) 0/1REMARKS
CHAPTER 4 NDA-24298 Page 598 Issue 1 AAKP : Assignment of ATT Key Position AAKP: Assignment of ATT Key Position 1. General This command sets the functions of the top row of Incoming Call Identification (ICI) keys for answering incoming calls at the Attendant Console. 2. Precautions 1. This command can be executed under one of following conditions: (a) The ATI circuit card is not mounted. (b) The ATT has been made busy using the MB switch on the ATI circuit card. (c) The DAY/NIGHT key on the ATT is set to the NIGHT position. 2. When the location of keys has been changed, the number of waiting call display (ASYD, SYS2, INDEX 8 and INDEX 9) is invalid for the ICI key (Off Hook Alarm Priority Call) programmed by this command. 3. The Attendant Console number (ATN) is the number assigned at the TK parameter of the ATRK command. 4. The maximum number of Attendant Consoles should be assigned by the ASYD command, SYS 1, INDEX 9. 5. The location of the keys that can be set by this command is shown in Figure 4-28.
NDA-24298 CHAPTER 4 Page 599 Issue 1 AAKP : Assignment of ATT Key Position Desk Console Figure 4-28 ATT Key Position (Desk Console - Business) Hotel Attendant Console L6 L5 123CancelVol Position Busy Night Night Position Busy Position Available Alarm 6 (TIE) 2 (EMG/SCB) 5 (Busy)4 (NANS)1 (TF) 3 (CAS/ICPT) In this illustration, the function indicated in each ( ) is the default function, which becomes valid if no other function has been set by this command, or if the function set has been deleted. Therefore, when the default function indicated in ( ) is to be used, data entry is not necessary. (NANS) (BUSY) (TIE) (TF) GST (HP) ADM RCL LDN(ICP) LT HWC DD45 6 KEY NUMBER 3 12
CHAPTER 4 NDA-24298 Page 600 Issue 1 AAKP : Assignment of ATT Key Position Hotel Desk Console 3. Data Entry Instructions Position BusyNight PAGE REC Start Mute TF Recall NANS ADM Busy TIE LDN AlarmPosition Available HWC 6 5 0 231 4HP DD GST LT ICPT 1 = CAS Line 3 = Priority Call 1 5 = Priority Call 3 2 = Off-Hook Alarm 4 = Priority Call 2 6-16 = Not used FUNC Enter the attendant console number. The number corresponds to the trunk number assigned by the ATRK command. 111 2 ATN ATTENDANT CONSOLE NUMBER (ATN)KEY NUMBER (KYN) 1-6FUNCTION CODE (FUNC) 1-16
NDA-24298 CHAPTER 4 Page 601 Issue 1 AAKP : Assignment of ATT Key Position 4. Data Sheet ATTENDANT NUMBER (ATN)KEY NUMBER (KYN) 1-6FUNCTION CODE (FUNC) 1-16ATTENDANT NUMBER (ATN)KEY NUMBER (KYN) 1-6FUNCTION CODE (FUNC) 1-16 11 22 33 44 55 66 11 22 33 44 55 66 11 22 33 44 55 66 11 22 33 44 55 66
CHAPTER 4 NDA-24298 Page 602 Issue 1 ACOC : Assignment of Central Office Code ACOC: Assignment of Central Office Code 1. General This command assigns the C.O. line code and tie line code corresponding to particular trunks. 2. Precautions 1. The Central Office Code (COC) assigned by this command is displayed on ATTCON and also the D term instead of the trunk number. 2. The COC assigned by this command is used to specify a trunk by the Individual Trunk Access service feature. 3. This command affects the trunk route assigned R/L = 1 by the ARTD command. 4. The Listed Directory Number (LDN) can be assigned as COC, and is convenient to identify the trunk. 3. Data Entry Instructions Enter 4 digits of COC DC ROUTE NUMBER (RT)TRUNK NUMBER (TK)DIGIT CODE (DC)REMARKS
NDA-24298 CHAPTER 4 Page 603 Issue 1 ACOC : Assignment of Central Office Code 4. Data Sheet ROUTE NUMBER (RT)TRUNK NUMBER (TK)DIGIT CODE (DC) 4 DIGITSREMARKS
CHAPTER 4 NDA-24298 Page 604 Issue 1 ACOC_LR : Assignment of Central Office Code – Logical Route Number ACOC_LR: Assignment of Central Office Code – Logical Route Number 1. General This command is used to assign C.O. line code and tie line code corresponding to particular trunks. Route Number of the ACOC command can be assigned by using Logical Route. 2. Precautions 1. Prior to this command, logical route data must be allocated by using the ALRTN command. 2. Only when logging in to the NCN (Network Control Node), this command can be used to assign the logical route data of self-Node and the other Nodes in the Fusion Network. If logging in to a LN (Local Node), data setting only for the self-node is available. (Error message is indicated if you try to write the data of other Node.) 3. The Central Office Code (COC) assigned by this command is displayed on ATTCON and also D term instead of the trunk number. 4. The COC assigned by this command is used to specify a trunk by the Individual Trunk Access service feature. 5. This command affects the trunk route assigned the R/L = 1 by the ARTD command. 6. The Listed Directory Number (LDN) can be assigned as COC, and is convenient to identify the trunk. 3. Data Entry Instructions Enter 4 digits of Central Office Code. DC EXTERNAL ROUTE NUMBER (RT) FUSION POINT CODE (FPC) 1-253 LOGICAL ROUTE NUMBER (LGRT) 1-899TRUNK NUMBER (TK) 1-255DIGIT CODE (DC) MAX. 4 DIGITS [0-9, *, #]REMARKS
NDA-24298 CHAPTER 4 Page 605 Issue 1 ACOC_LR : Assignment of Central Office Code – Logical Route Number 4. Data Sheet LOGICAL ROUTE NUMBER (LGRT) 1-899FUSION POINT CODE (FPC) 1-253EXTERNAL ROUTE NUMBER (RT)TRUNK NUMBER (TK) 1-255DIGIT CODE (DC) MAX. 4 DIGITS [0-9, *, #]REMARKS
CHAPTER 4 NDA-24298
Page 606
Issue 1
ACID : Assignment of Caller ID Data
ACID: Assignment of Caller ID Data
1. General
This command assigns calling number data for the following services:
Call Block
Distinctive Ringing - Caller ID
Representation Name
2. Precautions
1. A maximum of 28 calling numbers can be assigned to a single station.
3. Data Entry Instructions
STATION NUMBER
(STN)
MAXIMUM 6 DIGITS
RINGER
PATTERN
(RGP)
0/1/5/6/7 SERVICE
KIND 1
(SRV1)CALL
FORWARDING
INDEX
(CFI)
1-3TENANT NUMBER FOR
CALL FORWARDING
(CFI-TN)STATION NUMBER FOR
CALL FORWARDING
(CFI-STN)ABBREVIATED DIGIT
CODE FOR C.F.
(ADC) 4 DIGITS
1 = Attendant Console
2 = Station
3 = OutsideCALLER ID
(CID)
1-28
CFI SRV1
1 = C.F. - All Calls
2 = C.F. - Busy Line
3 = C.F. - Dont Answer
4 = Incoming Permission
5 = Call Block
6 = Distinctive Ringing - Caller ID
TN
When TYPE=1 (Transfer, Incoming Permission denial) is assigned
INPUT TYPE
(TYPE)
1
RGP
This parameter appears
when SRV1 = 6.
This parameter appears when CFI = 3.ADC
These parameters appear when CFI = 2.CFI-TN/CFI-STN