NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 327 Issue 1 ASDC : Assignment of Six Digit Least Cost Routing Data ASDC: Assignment of Six Digit Least Cost Routing Data 1. General This command is necessary when LCR six (6) digit translation is required for FX Prefix Codes, MCI, SPRINT and other applications. This command assigns, deletes, and displays this information. 2. Precautions 1. Before using this command, the following must be confirmed: - An Outgoing Route Selection Pattern Number (OPR) has been assigned in the AFRS (Assignment of Flexible Route Selection) command. - Outgoing Pattern Routing Data has been already assigned in the AOPR command. 2. When the Translation Pattern is for an FX line, designate the KIND parameter as “PFX.” 3. When the Translation Pattern is for a Special Common Carrier (MCI, SPRINT, etc.), designate the KIND parameter as “SCC.” 4. When the route to be used is changed according to the time of day, a Time of Day Change Pattern Number (TDPTN) from 1 to 7 is assigned, in accordance with the ATCP command. 5. When assigning data to the EFFECT parameter, the following must be noted: (a) When the KIND parameter is assigned “PFX,” 0/1 assigned to the EFFECT parameter has the following meaning: EFFECT = 0: means that an additional digit is not required for access to an FX line. EFFECT = 1: means that the digit “1” is required as a prefix for access to an FX line. (b) When KIND parameter is assigned “SCC,” 0/1 assigned to parameter EFFECT has the following meaning: EFFECT = 0: means that the office code is not allowed for the area code dialed. EFFECT = 1: means that the office code is allowed for the area code dialed. 6. When the EFFECT parameter is “2,” 6-digit translation is not required for the area code designated. 7. When deleting the AOPR command, this also deletes the ASDC table using the OPR pattern.
CHAPTER 4 NDA-24298
Page 328
Issue 1
ASDC : Assignment of Six Digit Least Cost Routing Data
3. Data Entry Instructions
0 = PFX (Prefix)
1 = SCC (MCI, SPRINT)KIND
Enter RA as the route advancing order
Enter the office codeRA
OFFICE
The details of this parameter are shown
below.
INPUT = Input office code can be assigned.
ALL = All office code can be assigned.OFLG
Enter the OPR assigned
by the AFRS commandOPR
KIND OF
SELECTION
(KIND)TIME OF DAY
CHANGE
PATTERN
NUMBER
(TDPTN) 0-7SELECTION
PATTERN
NUMBER
(OPR)
0-4000ROUTE
ADVANCING
ORDER
(RA)
0-7OFFICE CODE
(OFFICE)
200-999DESIGNATING
DATA
(EFFECT) OFFICE CODE
FLAG (OFLG)
INPUT/ALL
Enter data “1-7” if TDPTN/PTN is assigned by the ATCP/ACMO
command, otherwise “0”. Different TDPTN data can be assigned
to a single OPR.
Enter the data (EFFECT) in the space of the corresponding office code. The meaning
of data varies depending on the KIND parameter.
· When parameter KIND is assigned as PFX:
0 = an additional digit is not required for access to an FX line.
1 = the digit “1” is required as a prefix for access to an FX line.
2 = the digit “1” is required as a prefix for access to an FX line (display only).
· When parameter KIND is assigned as SCC:
0 = the office code is not allowed for the area code dialed.
1 = the office code is allowed for the area code dialed. TDPTN
EFFECT
NDA-24298 CHAPTER 4 Page 329 Issue 1 ASDC : Assignment of Six Digit Least Cost Routing Data 4. Data Sheet KIND OF SELECTION (KIND) PFX/SCCTIME OF DAY CHANGE PATTERN NUMBER (TDPTN) 0 – 7OUTGOING ROUTE OFFICE CODE FLAG (OFLG) INPUT/ALL SELECTION PATTERN NUMBER (OPR) 0 – 4000ROUTE ADVANCING ORDER (RA) 0 – 7 OFFICE CODE (OFFICE) 200 – 999 0123456789 0123456789 20X 21X 22X 23X 24X 25X 26X 27X 28X 29X 30X 31X 32X 33X 34X 35X 36X 37X 38X 39X 40X 41X 42X 43X 44X 45X 46X 47X 48X 49X 50X 51X 52X 53X 54X 55X 56X 57X 58X 59X 60X 61X 62X 63X 64X 65X 66X 67X 68X 69X 70X 71X 72X 73X 74X 75X 76X 77X 78X 79X X NXX NX
CHAPTER 4 NDA-24298 Page 330 Issue 1 ASDC : Assignment of Six Digit Least Cost Routing Data Note: Designating Data (EFFECT) is assigned in the square of the corresponding office code. When Designating Data is not assigned, the data is “0. 80X 81X 82X 83X 84X 85X 86X 87X 88X 89X 90X 91X 92X 93X 94X 95X 96X 97X 98X 99X KIND OF SELECTION (KIND) PFX/SCCTIME OF DAY CHANGE PATTERN NUMBER (TDPTN) 0 – 7OUTGOING ROUTE OFFICE CODE FLAG (OFLG) INPUT/ALL SELECTION PATTERN NUMBER (OPR) 0 – 4000ROUTE ADVANCING ORDER (RA) 0 – 7 OFFICE CODE (OFFICE) 200 – 999 0123456789 0123456789 X NXX NX
NDA-24298 CHAPTER 4 Page 331 Issue 1 ASDCL : Assignment of Six Digit Least Cost Routing Data for LDM ASDCL: Assignment of Six Digit Least Cost Routing Data for LDM 1. General This command is necessary when LCR six (6) digit translation is required for FX Prefix Codes, MCI, SPRINT and other applications. This command assigns, deletes, and displays this information. This data is written in Local Data Memory (LDM). 2. Precautions 1. Before using this command, the following must be confirmed: - An Outgoing Route Selection Pattern Number (OPR) has been assigned in the AFRSL (Assignment of Flexible Route Selection) command. - Outgoing Pattern Routing Data has been assigned in the AOPRL command. 2. When the Translation Pattern is for an FX line, designate the KIND parameter as “PFX.” 3. When the Translation Pattern is for a Special Common Carrier (MCI, SPRINT, etc.), designate the KIND parameter as “SCC.” 4. When the route to be used is changed according to the time of day, a Time of Day Change Pattern Number (TDPTN) from 1 to 7 is assigned, in accordance with the ATCP command. 5. When assigning data to the EFFECT parameter, the following must be noted: (a) When the KIND parameter is assigned “PFX,” 0/1 assigned to the EFFECT parameter has the following meaning: EFFECT = 0: means that an additional digit is not required for access to an FX line. EFFECT = 1: means that the digit “1” is required as a prefix for access to an FX line. (b) When KIND parameter is assigned “SCC,” 0/1 assigned to parameter EFFECT has the following meaning: EFFECT = 0: means that the office code is not allowed for the area code dialed. EFFECT = 1: means that the office code is allowed for the area code dialed. 6. When the EFFECT parameter is “2,” 6-digit translation is not required for the area code designated. 7. When deleting the AOPRL command, this also deletes the ASDCL table using the OPR pattern.
CHAPTER 4 NDA-24298
Page 332
Issue 1
ASDCL : Assignment of Six Digit Least Cost Routing Data for LDM
3. Data Entry Instructions
0 = PFX (Prefix)
1 = SCC (MCI, SPRINT)KIND
Enter RA as the route advancing order
Enter the office codeRA
OFFICE
The details of this parameter are shown
below.
INPUT = Input office code can be assigned.
ALL = All office code can be assigned.OFLG
Enter the OPR assigned
by the AFRS commandOPR
KIND OF
SELECTION
(KIND)TIME OF DAY
CHANGE
PATTERN
NUMBER
(TDPTN) 0-7SELECTION
PATTERN
NUMBER
(OPR)
0-4000ROUTE
ADVANCING
ORDER
(RA)
0-7OFFICE CODE
(OFFICE)
200-999DESIGNATING
DATA
(EFFECT) OFFICE CODE
FLAG (OFLG)
INPUT/ALL
Enter data “1-7” if TDPTN/PTN is assigned by the ATCP/ACMO
command, otherwise “0”. Different TDPTN data can be assigned
to a single OPR.
Enter the data (EFFECT) in the space of the corresponding office code. The meaning
of data varies depending on the KIND parameter.
· When parameter KIND is assigned as PFX:
0 = an additional digit is not required for access to an FX line.
1 = the digit “1” is required as a prefix for access to an FX line.
2 = the digit “1” is required as a prefix for access to an FX line (display only).
· When parameter KIND is assigned as SCC:
0 = the office code is not allowed for the area code dialed.
1 = the office code is allowed for the area code dialed. TDPTN
EFFECT
NDA-24298 CHAPTER 4 Page 333 Issue 1 ASDCL : Assignment of Six Digit Least Cost Routing Data for LDM 4. Data Sheet KIND OF SELECTION (KIND) PFX/SCCTIME OF DAY CHANGE PATTERN NUMBER (TDPTN) 0 – 7OUTGOING ROUTE OFFICE CODE FLAG (OFLG) INPUT/ALL SELECTION PATTERN NUMBER (OPR) 0 – 4000ROUTE ADVANCING ORDER (RA) 0 – 7 OFFICE CODE (OFFICE) 200 – 999 0123456789 0123456789 20X 21X 22X 23X 24X 25X 26X 27X 28X 29X 30X 31X 32X 33X 34X 35X 36X 37X 38X 39X 40X 41X 42X 43X 44X 45X 46X 47X 48X 49X 50X 51X 52X 53X 54X 55X 56X 57X 58X 59X 60X 61X 62X 63X 64X 65X 66X 67X 68X 69X 70X 71X 72X 73X 74X 75X 76X 77X 78X 79X X NXX NX
CHAPTER 4 NDA-24298 Page 334 Issue 1 ASDCL : Assignment of Six Digit Least Cost Routing Data for LDM Note: Designating Data (EFFECT) is assigned in the square of the corresponding office code. When Designating Data is not assigned, the data is “0. 80X 81X 82X 83X 84X 85X 86X 87X 88X 89X 90X 91X 92X 93X 94X 95X 96X 97X 98X 99X KIND OF SELECTION (KIND) PFX/SCCTIME OF DAY CHANGE PATTERN NUMBER (TDPTN) 0 – 7OUTGOING ROUTE OFFICE CODE FLAG (OFLG) INPUT/ALL SELECTION PATTERN NUMBER (OPR) 0 – 4000ROUTE ADVANCING ORDER (RA) 0 – 7 OFFICE CODE (OFFICE) 200 – 999 0123456789 0123456789 X NXX NX
NDA-24298 CHAPTER 4 Page 335 Issue 1 ASDCN : Assignment of Six Digit Least Cost Routing Data for NDM ASDCN: Assignment of Six Digit Least Cost Routing Data for NDM 1. General This command is necessary when LCR six (6) digit translation is required for FX Prefix Codes, MCI, SPRINT and other applications. This command assigns, deletes, and displays this information. The data assigned by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN). 2. Precautions 1. Before using this command, the following must be confirmed: - An Outgoing Route Selection Pattern Number (OPR) has been assigned in the AFRSN (Assignment of Flexible Route Selection) command. - Outgoing Pattern Routing Data has been assigned in the AOPRN command. 2. When the Translation Pattern is for an FX line, designate the KIND parameter as “PFX.” 3. When the Translation Pattern is for a Special Common Carrier (MCI, SPRINT, etc.), designate the KIND parameter as “SCC.” 4. When the route to be used is changed according to the time of day, a Time of Day Change Pattern Number (TDPTN) from 1 to 7 is assigned, in accordance with the ATCP command. 5. When assigning data to the EFFECT parameter, the following must be noted: (a) When the KIND parameter is assigned “PFX,” 0/1 assigned to the EFFECT parameter has the following meaning: EFFECT = 0: means that an additional digit is not required for access to an FX line. EFFECT = 1: means that the digit “1” is required as a prefix for access to an FX line. (b) When KIND parameter is assigned “SCC,” 0/1 assigned to parameter EFFECT has the following meaning: EFFECT = 0: means that the office code is not allowed for the area code dialed. EFFECT = 1: means that the office code is allowed for the area code dialed. 6. When the EFFECT parameter is “2,” 6-digit translation is not required for the area code designated. 7. When deleting the AOPRN command, this also deletes the ASDCN table using the OPR pattern.
CHAPTER 4 NDA-24298
Page 336
Issue 1
ASDCN : Assignment of Six Digit Least Cost Routing Data for NDM
3. Data Entry Instructions
0 = PFX (Prefix)
1 = SCC (MCI, SPRINT)KIND
Enter RA as the route advancing order
Enter the office codeRA
OFFICE
The details of this parameter are shown
below.
INPUT = Input office code can be assigned.
ALL = All office code can be assigned.OFLG
Enter the OPR assigned
by the AFRS commandOPR
KIND OF
SELECTION
(KIND)TIME OF DAY
CHANGE
PATTERN
NUMBER
(TDPTN) 0-7SELECTION
PATTERN
NUMBER
(OPR)
0-4000ROUTE
ADVANCING
ORDER
(RA)
0-7OFFICE CODE
(OFFICE)
200-999DESIGNATING
DATA
(EFFECT) OFFICE CODE
FLAG (OFLG)
INPUT/ALL
Enter data “1-7” if TDPTN/PTN is assigned by the ATCP/ACMO
command, otherwise “0”. Different TDPTN data can be assigned
to a single OPR.
Enter the data (EFFECT) in the space of the corresponding office code. The meaning
of data varies depending on the KIND parameter.
· When parameter KIND is assigned as PFX:
0 = an additional digit is not required for access to an FX line.
1 = the digit “1” is required as a prefix for access to an FX line.
2 = the digit “1” is required as a prefix for access to an FX line (display only).
· When parameter KIND is assigned as SCC:
0 = the office code is not allowed for the area code dialed.
1 = the office code is allowed for the area code dialed. TDPTN
EFFECT