Home > NEC > Communications System > NEC Neax 2400 Ipx Office Data Specification

NEC Neax 2400 Ipx Office Data Specification

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1020
    Add page 641 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 607
Issue 1
ACID : Assignment of Caller ID Data
    DAY/NIGHT
 (D/N)
D/N
RINGER
PATTERN
 (RGP)
0/1/5/6/7 SERVICE
  KIND 2
 (SRV2)
1/2CALL 
CONNECTING
INDEX
 (CFI)
1-3TENANT NUMBER FOR
CALL CONNECTING
(CFI-TN)STATION NUMBER FOR
CALL CONNECTING
(CFI-STN)
ABBREVIATED DIGIT
CODE FOR CALL
CONNECTING
(ADC) 4 DIGITS
1 = Attendant Console
2 = Station
3 = Outside
CALLER ID
     (CID)
    1-28
CFI SRV2
1 = Dial in
2 = C.O. connection restriction
RT
When TYPE=2 (Dial-in, C.O. connect restriction) is assigned
INPUT TYPE
(TYPE)
2
RGP
This parameter appears
when SRV1 = 6.
This parameter appears when CFI = 3.ADC
These parameters appear when CFI = 2.CFI-TN/CFI-STN
SERVICE
  KIND 3
 (SRV3)CALLER ID
   (CID)
    1-28
SRV3
1 = Representation Name
REPRESENTATION NAME
(NAME)
24 DIGITS AT MAXIMUM
When TYPE=3 (Representation Name) is assigned
INPUT TYPE
(TYPE)
3
1
Enter the desired name against the calling number (CID).NAME
    Add page 642 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 608
Issue 1
ACID : Assignment of Caller ID Data
(a) When TYPE = 1 (Transfer, Incoming Permission denial) is assigned
TNSTATION NUMBER
 (STN)
 MAXIMUM 6 DIGITSCALLER ID
(CID)
1-28
SERVICE 
KIND 1 
(SRV1)CALL FORWARDING 
INDEX
 (CFI) 
1-3TENANT NUMBER 
FOR CALL 
FORWARDING
 (CFI-TN)STATION NUMBER 
FOR CALL 
FORWARDING
 (CFI-STN)ABBREVIATED DIGIT 
CODE FOR C.F.
(ADC) 4 digitsRINGER PATTERN 
(RGP)
0/1/5/6/7
TNSTATION NUMBER
 (STN)
 MAXIMUM 6 DIGITSCALLER ID
(CID)
1-28
SERVICE 
KIND 1 
(SRV1)CALL FORWARDING 
INDEX
 (CFI) 1-3TENANT NUMBER 
FOR CALL 
FORWARDING
 (CFI-TN)STATION NUMBER 
FOR CALL 
FORWARDING 
(CFI-STN)ABBREVIATED DIGIT 
CODE FOR C.F.
(ADC) 4 DIGITSRINGER PATTERN 
(RGP)
0/1/5/6/7
TNSTATION NUMBER
 (STN)
 MAXIMUM 6 DIGITSCALLER ID
(CID)
1-28
SERVICE 
KIND 1  
(SRV1)CALL FORWARDING 
INDEX
 (CFI) 1-3TENANT NUMBER 
FOR CALL 
FORWARDING
 (CFI-TN)STATION NUMBER 
FOR CALL 
FORWARDING
(CFI-STN)ABBREVIATED DIGIT 
CODE FOR C.F.
(ADC) 4 DIGITSRINGER PATTERN 
(RGP)
0/1/5/6/7
TNSTATION NUMBER
 (STN)
 MAXIMUM 6 DIGITSCALLER ID
(CID)
1-28
SERVICE 
KIND 1  
(SRV1)CALL FORWARDING 
INDEX
(CFI) 1-3TENANT NUMBER 
FOR CALL 
FORWARDING
 (CFI-TN)STATION NUMBER 
FOR CALL 
FORWARDING
 (CFI-STN)ABBREVIATED DIGIT 
CODE FOR C.F.
(ADC) 4 DIGITSRINGER PATTERN 
(RGP)
0/1/5/6/7
TNSTATION NUMBER 
(STN)
 MAXIMUM 6 DIGITSCALLER ID
(CID)
1-28
SERVICE 
KIND 1  
(SRV1)CALL FORWARDING 
INDEX
 (CFI) 1-3TENANT NUMBER 
FOR CALL 
FORWARDING
(CFI-TN)STATION NUMBER 
FOR CALL 
FORWARDING
 (CFI-STN)ABBREVIATED DIGIT 
CODE FOR C.F.
(ADC) 4 DIGITSRINGER PATTERN 
(RGP)
0/1/5/6/7
    Add page 643 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 609
Issue 1
ACID : Assignment of Caller ID Data
(b) When TYPE = 2 (Dial-in, C.O. connect restriction) is assigned
RTDAY/NIGHT
(D/N)
D/NCALLER ID
(CID)
1-28
SERVICE 
KIND 2 
(SRV2) 1/2CALL CONNECTING 
INDEX
 (CFI) 
1-3TENANT NUMBER 
FOR CALL 
CONNECTING 
(CFI-TN)STATION NUMBER 
FOR CALL 
CONNECTING
 (CFI-STN)ABBREVIATED DIGIT
CODE FOR CALL 
CONNECTING
(ADC) 4 DIGITSRINGER PATTERN 
(RGP)
0/1/5/6/7
RTDAY/NIGHT
(D/N)
D/NCALLER ID
(CID)
1-28
SERVICE 
KIND 2
(SRV2) 1/2CALL CONNECTING 
INDEX
 (CFI) 
1-3TENANT NUMBER 
FOR CALL 
CONNECTING 
(CFI-TN)STATION NUMBER 
FOR CALL 
CONNECTING
 (CFI-STN)ABBREVIATED DIGIT
CODE FOR CALL 
CONNECTING
(ADC) 4 DIGITSRINGER PATTERN 
(RGP)
0/1/5/6/7
RTDAY/NIGHT
(D/N)
D/NCALLER ID
(CID)
1-28
SERVICE 
KIND 2
(SRV2) 1/2CALL CONNECTING 
INDEX
 (CFI) 
1-3TENANT NUMBER 
FOR CALL 
CONNECTING 
(CFI-TN)STATION NUMBER 
FOR CALL 
CONNECTING
 (CFI-STN)ABBREVIATED DIGIT
CODE FOR CALL 
CONNECTING
(ADC) 4 DIGITSRINGER PATTERN 
(RGP)
0/1/5/6/7
RTDAY/NIGHT
(D/N)
D/NCALLER ID
(CID)
1-28
SERVICE 
KIND 2
 (SRV2) 1/2CALL CONNECTING 
INDEX
 (CFI) 
1-3TENANT NUMBER 
FOR CALL 
CONNECTING 
(CFI-TN)STATION NUMBER 
FOR CALL 
CONNECTING
 (CFI-STN)ABBREVIATED DIGIT
CODE FOR CALL 
CONNECTING
(ADC) 4 DIGITSRINGER PATTERN 
(RGP)
0/1/5/6/7
RTDAY/NIGHT
(D/N)
D/NCALLER ID
(CID)
1-28
SERVICE 
KIND 2
 (SRV2) 1/2CALL CONNECTING 
INDEX
 (CFI) 
1-3TENANT NUMBER 
FOR CALL 
CONNECTING 
(CFI-TN)STATION NUMBER 
FOR CALL 
CONNECTING
 (CFI-STN)ABBREVIATED DIGIT
CODE FOR CALL 
CONNECTING
(ADC) 4 DIGITSRINGER PATTERN 
(RGP)
0/1/5/6/7
    Add page 644 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 610
Issue 1
ACID : Assignment of Caller ID Data
(c) When TYPE = 3 (Representation Name) is assigned
CALLER ID
(CID)
1-28
SERVICE
KIND 3 
(SRV3) 
REPRESENTATION NAME
(NAME)
24 DIGITS AT MAXIMUM
1
SERVICE
KIND 3 
(SRV3) CALLER ID
(CID)
1-28
REPRESENTATION NAME
(NAME)
24 DIGITS AT MAXIMUM
1
SERVICE 
KIND 3 
(SRV3) CALLER ID
(CID)
1-28
REPRESENTATION NAME
(NAME)
24 DIGITS AT MAXIMUM
1
SERVICE 
KIND 3 
(SRV3) CALLER ID
(CID)
1-28
REPRESENTATION NAME
(NAME)
24 DIGITS AT MAXIMUM
1
SERVICE 
KIND 3 
(SRV3) CALLER ID
(CID)
1-28
REPRESENTATION NAME
(NAME)
24 DIGITS AT MAXIMUM
1
    Add page 645 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 611
Issue 1
APAD : Assignment of PAD Data
APAD: Assignment of PAD Data
1. General
This command assigns PAD control data for tandem connections, and trunk-to-station connections.
2. Precautions
When KIND = 2 (station) is designated, assign the dummy data to the parameter OGPAD.
3. Data Entry Instructions
The kinds of connections entered
in this parameter are as follows:
1 = Tandem Connection
2 = Station
3 = Outgoing (Not used)
4 = Incoming (Not used)
1 9  1 1 
1 1  4  81  0 0 
2 KIND
The assignment of this parameter
is required only when KIND = 3
(Outgoing) is designated.
This data should be assigned by
the AMND command. DC     0 = No APAD Setting
1-14 = Note1                15 = PAD OFF (0dB) ICPAD/OGPAD
This parameter is not required for the
parameter KIND = 1 (Tandem Connec-
tion). ICPAD is not required when
assigning KIND as 3 (Outgoing).  SFC KIND
OF
CONNEC
-TION
(KIND)
1-4INCOMING
ROUTE
NUMBER
(ICRT)OUTGOING
ROUTE
NUMBER
(OGRT)SFC
0-15DIGIT CODE
(DC)
MAXIMUM 24 DIGITSINCOM-
 ING
PAD
DATA
(ICPAD)
1-15OUTGO-
ING
PAD
DATA
(OGPAD)
1-15
ICPAD
The parameter OGPAD is not required
when assigning KIND as 4 (Incoming). OGPAD
Note 1:  Switch setting varies depending on the
               trunk circuit card.  Refer to “Circuit
               Card Manual.”
    Add page 646 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 612
Issue 1
APAD : Assignment of PAD Data
4. Data Sheet
KIND OF
CONNECTION
(KIND)
1-4INCOMING
ROUTE
NUMBER
(ICRT)OUTGOING
ROUTE
NUMBER
(OGRT)SFC
0-15DIGITS CODE
(DC)
MAXIMUM 24 DIGITSINCOMING
PAD DATA
(ICPAD)
1-15OUTGOING
PAD DATA
(OGPAD)
1-15REMARKS
    Add page 647 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 613
Issue 1
APADN : Assignment of PAD Data for NDM
APADN: Assignment of PAD Data for NDM
1. General
This command assigns PAD control data for tandem connections and trunk to station connections in an FCCS
network. The data assigned by this command is written in the Network Data Memory (NDM) of the Network
Control Node (NCN), updating the NDM at each Local Node (LN).
2. Precautions
When KIND = S (Station) is designated, assign the dummy data to the parameter “OGPAD”.
3. Data Entry Instructions
The kinds of connection entering
in this parameter are as follows.
T=Tandem Connection
S=StationKIND
This parameter is not required when 
KIND=T (Tandem Connection) is
assigned.SFC
0=No APADN Setting
1-14=Note                     15=PAD OFF (0dB) ICPAD/OGPAD
Enter the Logical Route Number of Incoming
Route. When KIND=S (Station) is assigned,
this parameter is not required.Enter the Logical Route Number
of Outgoing Route. ICLGRT KIND OF
CONNECTION
(KIND)
T/SINCOMING
LOGICAL
ROUTE
NUMBER
(ICLGRT)
1-899OUTGOING
LOGICAL
ROUTE
NUMBER
(OGLGRT)
1-899SERVICE
FEATURE
CLASS
(SFC)
0-15INCOMING
PAD DATA
(ICPAD)
1-15OUTGOING
PAD DATA
(OGPAD)
1-15
OGLGRT
Note:  Switch setting varies depending on the
            trunk circuit card. Refer to “Circuit
           Card Manual”.
    Add page 648 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 614
Issue 1
APADN : Assignment of PAD Data for NDM
4. Data Sheet
KIND OF
CONNECTION
(KIND)
T/SINCOMING
LOGICAL ROUTE
NUMBER
(ICLGRT)
1-899OUTGOING
LOGICAL ROUTE
NUMBER
(OGLGRT)
1-899SERVICE
FEATURE
CLASS
(SFC)
0-15INCOMING
PAD DATA
(ICPAD)
1-15OUTGOING
PAD DATA
(OGPAD)
1-15
    Add page 649 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 615
Issue 1
AAED : Assignment of Announcement Equipment Data
AAED: Assignment of Announcement Equipment Data
1. General
This command assigns the trunk information related to Announcement Equipment on a tenant basis. For the
Hotel system, it is also possible to assign Language Class when Language Service of Property Management
System (PMS) is provided.
2. Precautions
1. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. If
data for this command is common for all tenants (ASYD command, SYS1, INDEX 93, bit7=1), assign TN
parameter as data “1” for all tenants.
2. EQP parameter designates the kind of service feature provided by the announcement trunk.
In the Hotel system, the relationship between the EQP number and the kind of service feature can be
arranged by the AHSY command. 
3. Parameter LANG appears in the Hotel system to provide “Language Service” (SYS1, INDEX 161, b2 = 1
in the ASYD command.)
4. The data “0 (Common)” of the LANG parameter means that the guest will listen the Common message
from the announcement equipment if the guest does not register the language information through PMS.
5. The R parameter specifies whether the Ring Back Tone (RBT) is provided prior to sending the message or
not.
6. When a trunk incoming call is connected to the announcement, whether the answer signal is sent out or
not is specified by the A parameter.
7. When data “0 (Single connection)” is assigned in the M parameter, the trunk number assignment (TK)
may not be required. The alternative trunk routing within a route is automatically executed. 
8. When the announcement equipment is to be used as a general announcement trunk, data “0” must be
assigned for parameters C, R, A and M.
9. The route number (RT) and trunk number (TK) of the announcement trunk are assigned by the ATRK
command.
    Add page 650 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 616
Issue 1
AAED : Assignment of Announcement Equipment Data
3. Data Entry Instructions
Enter EQP as the service feature provided by DAT. 
      0 = Dead Level Number
      1 = Unused Number
      2 = Remote Access to PBX
      3 = May be used for other purposes
      4 = Outgoing Trunk Busy Announcement
  5-6 = May be used for other purposes
      7 = Route Restriction Announcement
 8-14 = May be used for other purposes
   15 = Alert Service(for Hotel system)   
   16 = Timed Reminder Set Message (for Business system)/
            Service Set-up Message (for Hotel system)
   17 = Service Set-up Failure Message (for Hotel system)
   18 = Timed Reminder Cancel Message (for Business system)/
            Service Cancel Message (for Hotel Massage)
   19 = Service Cancel Failure Message (for Hotel system)
   20 = Room Cut-Off Announcement (for Hotel system)
   21 = Do Not Disturb Announcement (for Hotel system)
   22 = Timed Reminder/Wake Up Call Message for Announcement Trunk
23-31 = Group Announcement (for Hotel system)
  32 = Delay Announcement-Attendant (for U.S.A./Canada only)
  33 = Not Used
  34 = Automated Attendant (1st Announcement)
  35 = Automated Attendant (2nd Announcement)
  36 = Slumber Time-Do Not Disturb (for Slumber Time Group 1)
  37 = Slumber Time-Do Not Disturb (for Slumber Time Group 2)
  38 = Slumber Time-Do Not Disturb (for Slumber Time Group 3)
  39 = Slumber Time-Do Not Disturb (for Slumber Time Group 4)
  40 = Slumber Time-Do Not Disturb (for Slumber Time Group 5)
  41 = Slumber Time-Do Not Disturb (for Slumber Time Group 6)
  42 = Slumber Time-Do Not Disturb (for Slumber Time Group 7)
43-48 = Not Used
49-53 = Delay Announcement Attendant(1st Announcement)
54-58 = Delay Announcement Attendant (2nd Announcement)
59-121 = Not Used
122-125 = Multiple Announcememnt
126-127 = Not usedEQP
0=Single connection
1=Multiple connection M
TK parameter appears
if M=1 is entered. TK
0 = 30 seconds, and then disconnects
1 = The connection is held until the calling party released C
TENANT
NUMBER
(TN)ANNOUNCEMENT
EQUIPMENT
NUMBER
(EQP)0-127 KIND OF
LANGUAGE
(LANG)
0-15DURATION OF
CONNECTION
(C)
0/1SENDING
RBT
(R)
0/1ANSWER
SIGNAL
SENDING
(A)
0/1MULTIPLE
CONNECTION
(M)
0/1ROUTE
NUMBER
(RT)TRUNK
NUMBER
(TK)
Enter DAT route number assigned
by the ATRK command. RT
0 = Send RBT
1 = Do not send RBT R0 = Answer Signal is not sent
1 = Answer Signal is sent A
Note: The EQP for Hotel system can
be changed by the AHSY command.
The default EQP (service name)
is listed here.
  Note   Note
  Note
  Note
  Note
  Note  Note
  Note
LANG
0 = Common    1 = Japanese
2 = English       3 = German
4 = French        5 = Spanish
6 = Chinese      7 = Russian
8-15=Spare
Note:  LANG is available 
             for the Hotel appli-
             cation.
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Ipx Office Data Specification