NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 508
CHAPTER 4 NDA-24298
Page 474
Issue 1
ADKS : Assignment of Dterm Key Status Data
3. Data Entry Instructions
1 2 5 6 4 5 0 1 0
Select a Line/Feature button and DSS key arrangement
1 = 16 Line/Feature buttons + 16 DSS keys
2 = 24 Line/Feature buttons + 8 DSS keys
3 = 32 Line/Feature LKP
Page change key allocation (Refer to [Precaution])
0 = Page change key appears on a soft key(>>>)
1 = Page change key disappears on a soft key.PG
STATION NUMBER...](http://img.usermanuals.tech/thumb/54/84233/w64_nec-ipx-office-data-specification-issue-1_d-507.png "Page 508
CHAPTER 4 NDA-24298
Page 474
Issue 1
ADKS : Assignment of Dterm Key Status Data
3. Data Entry Instructions
1 2 5 6 4 5 0 1 0
Select a Line/Feature button and DSS key arrangement
1 = 16 Line/Feature buttons + 16 DSS keys
2 = 24 Line/Feature buttons + 8 DSS keys
3 = 32 Line/Feature LKP
Page change key allocation (Refer to [Precaution])
0 = Page change key appears on a soft key(>>>)
1 = Page change key disappears on a soft key.PG
STATION NUMBER...")
NDA-24298 CHAPTER 4 Page 477 Issue 1 ADRTL : Assignment of Dterm Display Route Data for LDM 4. Data Sheet ROUTE NUMBER (RT)CHARACTER DISPLAY TYPE (TYPE) 1, 2DISPLAY FOR TRUNK CLASS ON Dterm (DISP)REMARKS
CHAPTER 4 NDA-24298 Page 478 Issue 1 ADRTN : Assignment of Dterm Display Route Data for NDM ADRTN: Assignment of Dterm Display Route Data for NDM 1. General This command changes the display of trunk class information on the D term instead of the Trunk Class (TCL) designation of the ARTD command. This data is written in Network Data Memory (NDM) of the Network Control Node (NCN). 2. Precautions 1. The Route Class information is displayed on all D terms of all nodes in the Fusion Network. 2. The data assigned by this command has priority over the data assigned by the ADRTL command. 3. This data is not available for ISDN stations and PS. 4. When a call terminated from the trunk COC number has been assigned by ACOC command, the following is displayed on the D term as to “TYPE” parameter; TYPE = 1 (4 characters) is entered, both COC number assigned by ACOC command and 4-character trunk class assigned at “DISP” parameter is displayed. TYPE = 2 (8 characters) is entered, only the 8-character trunk class assigned at “DISP” parameter is displayed. 3. Data Entry Instructions The maximum number of characters 1 = 4 (4 bytes ASCII characters) 2 = 8 (8 bytes ASCII characters)TYPE Assign Logical Route number at NCN in the Fusion Network.LGRT Logical Route Number (LGRT) 1-899Character Display Type (TYPE) 1, 2Display for Trunk Class on Dterm (DISP)REMARKS The characters displayed on the Dterm. DISP
NDA-24298 CHAPTER 4 Page 479 Issue 1 ADRTN : Assignment of Dterm Display Route Data for NDM 4. Data Sheet LOGICAL ROUTE NUMBER (LGRT) 1-899CHARACTER DISPLAY TYPE (TYPE) 1, 2DISPLAY FOR TRUNK CLASS ON Dterm (DISP)REMARKS
CHAPTER 4 NDA-24298 Page 480 Issue 1 AICD : Assignment of Intercom Data AICD: Assignment of Intercom Data 1. General This command assigns the data related to the Automatic/Annual Intercom service feature. 2. Precautions 1. Up to 16 stations may be assigned to one Intercom group. 2. Only D term(s) can have the Automatic/Manual Intercom service feature applied. 3. A maximum number of Intercom groups within a Module Group (MG) is 50 groups, and each group is given a unique Group ID Number (G-ID). 4. Prior to this command, ASYD command, SYS1, INDEX59, bit7=1 (Automatic/Manual Intercom is in service) is required. 5. After the appropriate data has been assigned by this command, assign the AKYD command as follows: KYI = 2, KD = 1, ICM = 0 (Automatic Intercom key) KYI = 2, KD = 1, ICM = 1 (Manual Intercom key) If the SIG key is required for Manual Intercom service feature, KYI = 1,FKY = 60 (Manual Signaling key). 6. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. 7. When you delete an Intercom member station away from the intercom group, you must first delete the data assigned by the AKYD command. Then you may delete the data assigned by this (AICD) command. 8. An Intercom member can override another Intercom station in a two-party Intercom connection. This kind of overriding is referred to as INTERCOM BRIDGE.
NDA-24298 CHAPTER 4 Page 481 Issue 1 AICD : Assignment of Intercom Data 3. Data Entry Instructions Enter the Module Group number of the Intercom group.MG No. 0 = Automatic Intercom 1 = Manual Intercom A/M Enter the Tenant Number of the Intercom group. TN Enter the Intercom member stations which can receive an Intercom call. SIG STN Enter the Intercom member stations which can originate an Intercom call. ICM STN 0 = Restricted 1 = Allowed1 2 3 BCR Enter a unique number for each Intercom group with a range from 1 to 50.G-ID MODULE GROUP NUMBER (MG No.)GROUP ID NUMBER (G-ID) 1-50AUTO/ MANUAL SIGNALING (A/M) 0/1BRIDGE CALL RESTRIC- TION (BCR) 0/1INTERCOM STATION NUMBER (ICM STN)SIGNALLING STATION NUMBER (SIG STN) TENANT NUMBER (TN) No.
CHAPTER 4 NDA-24298 Page 482 Issue 1 AICD : Assignment of Intercom Data 4. Data Sheet MODULE GROUP NUMBER (MG No.)GROUP ID NUMBER (G-ID) 1-50AUTO/MANUAL SIGNALING (A/M) 0/1BRIDGE CALL RESTRICTION (BCR) 0/1TENANT NUMBER (TN)NO.INTERCOM STATION NUMBER (ICMSTN)SIGNALING STATION NUMBER (SIGSTN) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
NDA-24298 CHAPTER 4 Page 483 Issue 1 AICD_T : Assignment of Intercom Data – Telephone Number AICD_T : Assignment of Intercom Data – Telephone Number 1. General This command is used to assign the data related to the Automatic/Manual Intercom service feature. The station data of AICD command can be assigned by using Telephone Number instead. 2. Precautions 1. Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the ALGSL command is not available in this command. 2. In case logging in to a LN, only the Telephone Numbers allocated to the stations within the logged-in node can be used in this command. Also, when logging in to the NCN, the data memory of the whole nodes in the network can be written. 3. Up to 16 stations may be assigned to one Intercom group. 4. Only Dterm(s) can have the Automatic/Manual Intercom service feature applied. 5. A maximum number of Intercom groups within a Module Group (MG) is 50 groups, and each group is given a unique Group ID Number (G-ID). 6. Prior to this command, ASYD command, SYS1, INDEX59, bit7=1 (Automatic/Manual Intercom is in service) is required. 7. After the appropriate data has been assigned by this command, assign the AKYD command as follows: KYI=2, KD=1, ICM=0 (Automatic Intercom key) KYI=2, KD=1, ICM=1 (Manual Intercom key) If the SIG key is required for Manual Intercom service feature, KYI=1, FKY=60 (Manual Signaling key). 8. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS1, INDEX 8. 9. When you delete an Intercom member station away from the intercom group, you must first delete the data assigned by the AKYD command. Then you may delete the data assigned by this (AICD_N) command. 10. An Intercom member can override another Intercom station in a two-party Intercom connection. This kind of overriding is referred to as INTERCOM BRIDGE.
CHAPTER 4 NDA-24298 Page 484 Issue 1 AICD_T : Assignment of Intercom Data – Telephone Number 3. Data Entry Instructions Note 1: The existing data can be readout by pressing “Get” button after MG No. and G-ID data is entered. Note 2:When the existing Intercom Station is assigned only by Station Number, UGN data is not displayed on the list. Allocate the Telephone Numbers to all the Intercom stations. ICMCT MODULE GROUP NUMBER (MG No.) 00-07GROUP ID NUMBER (G-ID) 1-50AUTO/MANUAL SIGNALING (A/M)TENANT NUMBER (TN)CNTUSER GROUP NUMBER (UGN) BRIDGE CALL RESTRICTION (BCR) TELEPHONE NUMBER OF INTERCOM STATION (ICM TELN) Max. 16 digitsTELEPHONE NUMBER OF SIGNALLING STATION (SIG TELN) Max. 16 digits MG No. Enter the Module Group number of the Intercom group.A/M Automatic Intercom Manual Intercom CNT The number of Intercom Stations.BCR Restricted AllowedG-ID Enter a unique number for each Intercom group within a range from 1 to 50. SIG TELN Enter the Telephone Number of the Intercom member stations which can receive an Intercom call. Note 2ICM TELN Enter the Telephone Number of the Intercom member stations which can originate an Intercom call. Note 2 1 2
NDA-24298 CHAPTER 4 Page 485 Issue 1 AICD_T : Assignment of Intercom Data – Telephone Number 4. Data Sheet MODULE GROUP NUMBER (MG No.) 00-07GROUP ID NUMBER (G-ID) 1-50AUTO/MANUAL SIGNALING (A/M)BRIDGE CALL RESTRICTION (BCR)TENANT NUMBER (TN)CNTUSER GROUP NUMBER (UGN) ICMCTTELEPHONE NUMBER OF INTERCOM STATION (ICM TELN) Max. 16 digitsTELEPHONE NUMBER OF SIGNALLING STATION (SIG TELN) Max. 16 digits 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 MG No. 00-07G-ID 1-50A/M BCR TN CNT UGN ICMCTICM TELN Max. 16 digitsSIG TELN Max. 16 digits 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
CHAPTER 4 NDA-24298 Page 486 Issue 1 ADIM : Assignment of Dial Intercom Data ADIM: Assignment of Dial Intercom Data 1. General This command assigns Dial Intercom service related data. 2. Precautions 1. To provide Dial Intercom Service, it is necessary to assign the following data in advance: ASYD command, SYS1, Index 59, b7 = 1 2. The number of D term stations that can be accommodated in a Dial Intercom Group and also the number of digits for Call Number (Dial Intercom STN) are determined by parameter N (Dial Intercom Digit Number). 3. When N = 0 is entered, a maximum of 10 Intercom Station Numbers can be assigned. When N = 1 is entered, a maximum of 64 Intercom Station Numbers can be assigned. 4. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. 5. Enter “My Line” Station Number of D term in the ICMSTN (Dial Intercom Station Number) parameter. 6. Compose a Dial Intercom Group with D term stations of the same Tenant Number (TN) under the same Module Group (MG). 7. From 1 to 50 Dial Intercom Groups can be composed on each Module Group (MG) basis. 8. An Intercom member can override another Intercom station in a two-party Intercom connection. This kind of overriding is referred to as INTERCOM BRIDGE. 3. Data Entry Instructions 0 = one digit (0-9) 1 = two digits (00-63) 0 1N MODULE GROUP NUMBER (MG No.)GROUP ID NUMBER (G-ID) 1-50DIAL INTERCOM DIGIT NUMBER (N) 0/1BRIDGE CALL RESTRIC- TION (BCR) 0/1TENANT NUMBER (TN)REMARKS REMARKS INTERCOM STATION NUMBER (ICM STN) ICMCT ICMCT INTERCOM STATION NUMBER (ICM STN)0 = Restricted 1 = Allowed BCR 5 6