NEC Neax 2400 Ipx Office Data Specification
Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24298 CHAPTER 4 Page 137 Issue 1 ASYD : Assignment of System Data 1200 b0LP08 #0 is mounted on PBI40 Module for IPX-UMG system b1LP08 #1 is mounted on PBI40 Module for IPX-UMG system 0 b2Not used 0b3 b4LP10 #0 is mounted on PBI44 Module for IPX-UMG system b5LP10 #1 is mounted on PBI44 Module for IPX-UMG system 0 b6Not used 0b7 201 b0LP12 #0 is mounted on PBI48 Module for IPX-UMG system b1LP12 #1 is mounted on PBI48 Module for IPX-UMG system 0 b2Not used 0b3 b4LP14 #0 is mounted on PBI4C Module for IPX-UMG system b5LP14 #1 is mounted on PBI4C Module for IPX-UMG system 0 b6Not used 0b7 202 b0LP16 #0 is mounted on PBI50 Module for IPX-UMG system b1LP16 #1 is mounted on PBI50 Module for IPX-UMG system 0 b2Not used 0b3 b4LP18 #0 is mounted on PBI54 Module for IPX-UMG system b5LP18 #1 is mounted on PBI54 Module for IPX-UMG system 0 b6Not used 0b7 203 b0LP20 #0 is mounted on PBI58 Module for IPX-UMG system b1LP20 #1 is mounted on PBI58 Module for IPX-UMG system 0 b2Not used 0b3 b4LP22 #0 is mounted on PBI5C Module for IPX-UMG system b5LP22 #1 is mounted on PBI5C Module for IPX-UMG system 0 b6Not used 0b7 204 b0LP24 #0 is mounted on PBI60 Module for IPX-UMG system b1LP24 #1 is mounted on PBI60 Module for IPX-UMG system 0 b2Not used 0b3 b4LP26 #0 is mounted on PBI64 Module for IPX-UMG system b5LP26 #1 is mounted on PBI64 Module for IPX-UMG system 0 b6Not used 0b7 SYSTEM DATA TYPE (SYS)SYSTEM DATA INDEX (INDEX) 0 - 511DATA (DATA) 00 - FF (Hex)BIT CORRESPONDING DATA SYSTEM DATA CONTENTS DATA 0/1BIT
CHAPTER 4 NDA-24298 Page 138 Issue 1 ASYD : Assignment of System Data 1205 b0LP28 #0 is mounted on PBI68 Module for IPX-UMG system b1LP28 #1 is mounted on PBI68 Module for IPX-UMG system 0 b2Not used 0b3 b4LP30 #0 is mounted on PBI6C Module for IPX-UMG system b5LP30 #1 is mounted on PBI6C Module for IPX-UMG system 0 b6Not used 0b7 206 00Not used 207 b0IP00 System #0 0/1 = Not mounted/Mounted b1IP00 System #1 0/1 = Not mounted/Mounted b2IP01 System #0 0/1 = Not mounted/Mounted b3IP01 System #1 0/1 = Not mounted/Mounted b4IP02 System #0 0/1 = Not mounted/Mounted b5IP02 System #1 0/1 = Not mounted/Mounted b6Not used b7Not used 208 00 Not used 209 b0Processor Bus No. 0 (Usually assign as “1”.)Processor Bus Indication (for IPX-UMG system). 0 = Not Mounted 1 = Mounted b1Processor Bus No. 1 (Usually assign as “1”.) 0 b2~b6Not used 1 b7 If both TSWs in MG are defective, the following functions are activated: PFT service TSW Fault Message Output Automatic Recover of TSW 0/1 = Not Required/Required SYSTEM DATA TYPE (SYS)SYSTEM DATA INDEX (INDEX) 0 - 511DATA (DATA) 00 - FF (Hex)BIT CORRESPONDING DATA SYSTEM DATA CONTENTS DATA 0/1BIT
NDA-24298 CHAPTER 4 Page 139 Issue 1 ASYD : Assignment of System Data 1210 00 Not used 213 00 Not used 214 00 b0 Not used b1 b2 b3 b4 b5Node Suppression - Centralized Billing CCIS 0/1 = Out/In Service b6Not usedb7 215 00Not used 219 00Not used 220 b0Protocol of ISDN Terminal (BRI station) 0:Japan (INS64) 1:U.S.A. (5ESS) 2:Australia (TPH 1962) 3:Not used 4:Not used 5:N-ISDN1 6-15:Not used b1 b2 b3 b4Rate Adaption (RA) for ISDN Terminal 0: RA designated by ADA2 command 1: V.110/X.30 2: Not used 3: Not used b5 0b6ISDN service (When Index 186 bit6 = 1) 0/1 = In Service/Out of Service b7 ISDN Trunk Layer3 Timer 0/1 = Stop/Activate Note:Normally assign “0. (Only specific service needs data “1” in this bit.) Related Layer3 Timer: T303, T310, T313. 221 00 Not used 228 00Not used SYSTEM DATA TYPE (SYS)SYSTEM DATA INDEX (INDEX) 0 - 511DATA (DATA) 00 - FF (Hex)BIT CORRESPONDING DATA SYSTEM DATA CONTENTS DATA 0/1BIT ~ ~ ~ ~ ~ ~ ~ ~ ~
CHAPTER 4 NDA-24298 Page 140 Issue 1 ASYD : Assignment of System Data 1229 000 b0 Disable Attendant Console Loop keys when that console is in Night Mode (Nite Key engaged) 0/1 = No/Yes 0 b1Not used b2 With the key pad pressed by the Attendant while talking with the incoming call, DTMF (PB) signal is sent out to the incoming call. 0/1 = Not Required/Required b3Day/Night Change Message Automatic Output. 0/1 = Out/In Service 0 b4 Not usedb5 b6 b7 230b0~b6Not used b7Receive/Send timing for ISDN/CCIS message 0/1 = 32ms/128ms 231 00 Not used 232 b0Call Forward All Clear 0/1 = No/Yes Used in conjunction with Indexes 89 and 90 b1Call Forward Busy Clear 0/1 = No/Yes b2Call Forward No Answer Clear 0/1 = No/Yes b3 Not used b4 b5 b6 b7 233 00Not used SYSTEM DATA TYPE (SYS)SYSTEM DATA INDEX (INDEX) 0 - 511DATA (DATA) 00 - FF (Hex)BIT CORRESPONDING DATA SYSTEM DATA CONTENTS DATA 0/1BIT
NDA-24298 CHAPTER 4 Page 141 Issue 1 ASYD : Assignment of System Data 1234 b0Connection acknowledge polarity reversal signal 0/1 = Not Required/Required (Multi-Frequency) 0 b1 Not used b2 b3 b4 b5 b6 b7 235 00Not used 236 00 Not used 2370 b0-b6Not used b7When a call terminated to vacant number by Direct Inward Dialing 0/1 = Send Busy Tone/Reorder Tone 238 00 Not used 239 00 Not used SYSTEM DATA TYPE (SYS)SYSTEM DATA INDEX (INDEX) 0 - 511DATA (DATA) 00 - FF (Hex)BIT CORRESPONDING DATA SYSTEM DATA CONTENTS DATA 0/1BIT
CHAPTER 4 NDA-24298 Page 142 Issue 1 ASYD : Assignment of System Data 1 2400 b0 Not used 0b1 0b2 0b3 b4 This bit defines the meaning of the “Station Information” in the office that has VMS/Host Computer within the CCIS No. 7 Network. 0 = Station Information = Office Code + Station Number 1 = Station Information = Station Number Note:Station Information corresponds to Mail Box in VMS Office Code indicates the self office code assigned by ARNP. Example: Pattern 1STAMail Box Number 1000 2000 3000 In case of pattern 1, b 4 is 1 Pattern 2STAMail Box Number 61000 72000 83000 In case of pattern 2, b 4 is 0. b5-b6Not used b7 The Kind of tone after dialing Remote Access number for Remote Access to System 0/1: SST /SPDT SYSTEM DATA TYPE (SYS)SYSTEM DATA INDEX (INDEX) 0 - 511DATA (DATA) 00 - FF (Hex)BIT CORRESPONDING DATA SYSTEM DATA CONTENTS DATA 0/1BIT Office Code: 8 Office Code: 6 Office Code: 7PBX PBXPBXVMS CCIS CCIS STN 3000 STN 2000STN 1000
NDA-24298 CHAPTER 4 Page 143 Issue 1 ASYD : Assignment of System Data 1241 b0Data Port Chime Control by SCF 0/1 = To be controlled/Not to be controlled b1The number of digits displayed in Name Display Service 0/1 = 8 digits/16 digits b2OAI Call Event Process 0/1 = No/Yes b3Detail Information on SCG error 0/1 = No/Yes b4MF ANI on SMDR 0/1 = No/Yes b5Privacy Release for single line 0/1 = No/Yes b6When the length of Caller ID exceeds the limit: 0/1 = Only the former/latter part of data appears on the LCD b7Not used 242 b0Miscellaneous Timer Counter (MTC) is to be assigned a value from 0 Hex to F Hex (0 – 15).Timer for Delay Announcement – Attendant (Duration of RBT) Timer Value Setting is MTC × TC sec. Note:When this data is 00 Hex, default data is auto- matically set to 30 sec. b1 b2 b3 b4Timer Class (TC) is to be assigned one of the following values: b6b5b4b6b5b4 0 00=–100=– 0 01=–101=– 0 10=–110=– 0 11=2 sec. 111=– b5 b6 b7Not used 243 00 Ans. timer for transfer trunk. Same format as 242. The default is 64 sec SYSTEM DATA TYPE (SYS)SYSTEM DATA INDEX (INDEX) 0 - 511DATA (DATA) 00 - FF (Hex)BIT CORRESPONDING DATA SYSTEM DATA CONTENTS DATA 0/1BIT
CHAPTER 4 NDA-24298 Page 144 Issue 1 ASYD : Assignment of System Data 1244 b0 Answer by Radio Paging answer code. 0/1 = Out/In Service Note:This bit is valid when SYS-1, INDEX 73, Bit 4 is 1 (= Station Number is Automatically sent). 0 b1 Not used b2MCI-CCIS output packet change when the last digit is “*.” 0/1 = -/route number and trunk number are output 0 b3 , b4Not used b5 Timing of providing the announcement for Delay Announcement -Attendant 0 = immediately after the call termination 1 = after the ring back tone (SYS1, INDEX242) b6 Hooking operation during 3-party conference call; 0 = - 1 = Hooking operation is invalid Note:This data is available since Release 9 software. 0 b7Not used 245 b0Miscellaneous Timer Counter (MTC) is to be assigned a value from 0 Hex to F Hex (0– 15). Timer for Delay Announcement – Attendant (Duration of Music on Hold) Note:When this data is 00 Hex, default data is auto- matically set to 30 sec. b1 b2 b3 b4Timer Class (TC) is to be assigned one of the following values: b6b5b4b6b5b4 0 00=–100=– 0 01=–101=– 0 10=–110=– 0 11=2 sec.111=– b5 b6 b7Not used SYSTEM DATA TYPE (SYS)SYSTEM DATA INDEX (INDEX) 0 - 511DATA (DATA) 00 - FF (Hex)BIT CORRESPONDING DATA SYSTEM DATA CONTENTS DATA 0/1BIT 1ST. 2ND. ONE
NDA-24298 CHAPTER 4 Page 145 Issue 1 ASYD : Assignment of System Data 1246 b0 While engaging in a two-party call with a station/trunk, the Attendant places the call on hold by pressing either the ANSWER key or the Incoming Call Identification (ICI) key and answers the next call. 0/1 = Not Available/Available b1 While engaging in a three-way call with station/trunks, the Attendant exits from the call by depressing either ANSWER key or ICI key and answers an incoming call terminated next. 0/1 = Not Available/Available 0 b2Attendant Delay Announcement 0/1= Multiple Playback/Single Playback b3MCI Expansion 0/1 = Normal/Expanded b4 Process of incoming calls (Ring Down), after they encounter their 1st and 2nd receiver time-out, in a sequence of Automated Attendant 0/1 = Forced Release/Transfer to ATT b5Expanded 911 service 0/1 = No/Yes b6OAS Message Type 0/1 = Normal/IBM Call Path b7 247 b0 ~ b3 Miscellaneous Timer Counter (MTC) is to be assigned a value from 0 Hex to F Hex (0~15)No Answer Timer for Blind Transfer- station Timer Value Setting is MTC × TC sec. Note:When this data is 00 hex, default data is auto- matically set to 30 sec. b4 ~ b7 Timer Class (TC) is to be assigned one of the following values: b6b5b4b6b5b4 0 00=–100=– 0 01=–101=– 0 10=–110=– 0 11=2 sec.111=8 sec. SYSTEM DATA TYPE (SYS)SYSTEM DATA INDEX (INDEX) 0 - 511DATA (DATA) 00 - FF (Hex)BIT CORRESPONDING DATA SYSTEM DATA CONTENTS DATA 0/1BIT
CHAPTER 4 NDA-24298 Page 146 Issue 1 ASYD : Assignment of System Data Note 1:When this data has been set as specified below, the alarm message output value becomes 80% and the alarm message output clear message output value becomes 50% regardless of the data. When the data of INDEX 249 is smaller than or equal to the data of INDEX 250 When these data values are not valid. 12480 b0 ~ b3Not used b4Call Forward Don’t Answer After Attendant Camp-On 0/1 = No/Yes b5Not used b6 When the destination station has been set Call Forwarding - Don’t Answer 0 = Recall to the station 1 = C.F. – Don’t Answer is activated. Note:Available for software Release 9 or later. b7 Tone to be sent out when the handset is off-hook at the station on which C.F. – All Calls service is set. 0/1 = Dial Tone (DT)/Special Dial Tone (SPDT) 249 b0 ~ b7 SMDR output buffer usage rate (01–99%) at the time of output of SMDR Buffer Overflow Alarm message (System Message 6-O) Note 1 Example: Indicates that the usage rate has been set to 80%. SYSTEM DATA TYPE (SYS)SYSTEM DATA INDEX (INDEX) 0 - 511DATA (DATA) 00 - FF (Hex)BIT CORRESPONDING DATA SYSTEM DATA CONTENTS DATA 0/1BIT b7b6b5b4b3b2b1b0 Unit Tens b7b6b5b4b3b2b1b0 80 10 000 000