Home > NEC > Communications System > NEC Neax 2400 Ipx Office Data Specification

NEC Neax 2400 Ipx Office Data Specification

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Ipx Office Data Specification online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1020
    Add page 901 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 867
Issue 1
ACTKC : Assignment of Connection Trunk Data for LDM
ACTKC: Assignment of Connection Trunk Data for LDM
1. General
This command assigns and deletes the connection trunk data for B-channel/D-channel route by designating the
range of trunk numbers and LENS.
2. Precautions
1. This command can be used only when the PBX and the MAT are connected in on-line state.
3. Data Entry Instruction
Note 1:When “Delete” is selected in “KIND” box, the data for “C_RT”, “C_TK” and “STEP” is required.
Note 2:When the assignment/deletion is successful, “OK” displays in “STATUS” grid. Otherwise, related error
message is provided.
CONNECTION
ROUTE
NUMBER
(C_RT)
1-1023CONNECTION
TRUNK NUMBER
(C_TK)
1-4095CONNECTION
EQUIPMENT
NUMBER
(C_LENS)GROUP 
NUMBER
(GROUP)
0-31LEVEL
NUMBER
(LEVEL)
0-7 COUNT
UP
STEP
(STEP)
1-10COUNT
UP
TYPE
(TYPE)
1-6STATUS
STEP
Specify the interval between the consecutive connection 
trunk numbers to be assigned/deleted.
Ex.  C_TK (START)=1, STEP=3 is entered, connection 
trunk number is assigned/deleted as follows;
        [1, 4, 7, 10, 13, 16, ......]
LEVEL
Enter the first/last 
level number.
START ENDSTART ENDSTART ENDSTART END
C_TK
The connection trunk controlled 
by the connection route. Enter the 
range of trunk numbers to be 
assigned/deleted.TYPE
This parameter determines how to 
arrange the trunk data. Refer to the 
next pages for more detail 
explanation.
1:  LEVEL
2:  LEVEL
3:  GROUP
4:  GROUP
5:  UNIT
6:  UNIT→
→
→
→
→
→GROUP
UNIT
UNIT
LEVEL
LEVEL
GROUP→
→
→
→
→
→UNIT
GROUP
LEVEL
UNIT
GROUP
LEVELC_LENS
LENS of the trunk for B- 
channel and D-channel.
C_RT
The route assigned for 
B-channel and D-channel.
Enter the first/last 
group number.GROUP
    Add page 902 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 868
Issue 1
ACTKC : Assignment of Connection Trunk Data for LDM
[Details on Trunk Arrangement “TYPE”]
When assigning the consecutive trunk data using the ACTKC command, you must select the trunk arrangement
type (1-6) in the “TYPE” parameter.
The following examples apply when the 16 COT circuit cards are accommodated:
TYPE=1 (Level → Group → Unit)
Trunk data is arranged in the following numerical order:
U=2
00
PIM C/EU=3
05 10 15 20
16
C
O
PIM C/E
U=0U=1
T
16
C
O
T 16
C
O
T16
C
O
T 16
C
O
T16
C
O
T
LV 7
LV 6
LV 5
LV 4
LV 3
LV 2
LV 1
LV 0
LV 0 LV 1
LV 2 LV 3 LV 4
LV 5
LV 6
LV 71
2
3 4 5
6
7
8
029 16
0325 32
0517 24
04
49 5657
64
05 06
U=2
U=0
03 02 33 40
00
41 48
01
73 8065
72
16 15
U=3
U=1
81 8889
96
Group No. Level No.
1MGSlot No.
    Add page 903 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 869
Issue 1
ACTKC : Assignment of Connection Trunk Data for LDM
TYPE=2 (Level → Unit → Group)
Trunk data is arranged in the following numerical order:
TYPE=3 (Group → Level → Unit)
Trunk data is arranged in the following numerical order:
LV 7
LV 6
LV 5
LV 4
LV 3
LV 2
LV 1
LV 0
LV 0 LV 1 LV 2 LV 3
LV 4
LV 5
LV 6
LV 71
2 3 4
5
6
7
8
0233 40
0381 88
0565 72
04
17 2449
56
05 06
U=2
U=0
03 02 9 16
00
41 48
01
57 6425
32
16 15
U=3
U=1
73 8089
96
Group No. Level No.
1MGSlot No.
LV 7
LV 6
LV 5
LV 4
LV 3
LV 2
LV 1
LV 0
LV 0 LV 1
LV 2
LV 3
LV 4
LV 5
LV 6
LV 71
5 29
024 32
05 49 63
50 64
05 06
U=2
U=0
03 02 33 47
0034 48
01 65 93
16 15
U=3
U=1
68 96
Group No. Level No.
1MGSlot No.
83536
2
033
04 51 52 69 72
    Add page 904 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 870
Issue 1
ACTKC : Assignment of Connection Trunk Data for LDM
TYPE=4 (Group → Unit → Level)
Trunk data is arranged in the following numerical order:
TYPE=5 (Unit → Level → Group)
Trunk data is arranged in the following numerical order:
LV 7
LV 6
LV 5
LV 4
LV 3
LV 2
LV 1
LV 0
LV 0 LV 1
LV 2
LV 3
LV 4
LV 5
LV 6
LV 71 13 85
024 88
05 7 91
8 92
05 06
U=2
U=0
03 02 5 89
006 90
01 9 93
16 15
U=3
U=1
12 96
Group No. Level No.
1MGSlot No.
16 17 18
2
033
04 19 20 21 24
LV 7
LV 6
LV 5
LV 4
LV 3
LV 2
LV 1
LV 0
LV 0 LV 1
LV 2
LV 3
LV 4
LV 5
LV 6
LV 71
5 29
0281 95
05 3 31
35 63
05 06
U=2
U=0
03 02 2 30
0034 62
01 4 32
16 15
U=3
U=1
82 96
Group No. Level No.
1MGSlot No.
83 6 38
33
0365
04739 8 84
64 80
40 68
36 66
37 67 61 79
    Add page 905 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 871
Issue 1
ACTKC : Assignment of Connection Trunk Data for LDM
TYPE=6 (Unit → Group → Level)
Trunk data is arranged in the following numerical order:
LV 7
LV 6
LV 5
LV 4
LV 3
LV 2
LV 1
LV 0
LV 0 LV 1
LV 2
LV 3
LV 4
LV 5
LV 6
LV 71 13 85
0211 95
05 3 87
7 91
05 06
U=2
U=0
03 02 2 86
006 90
01 4 89
16 15
U=3
U=1
12 96
Group No. Level No.
1MGSlot No.
23 14 18
5
039
04 15 19 16 24
92 94
20 22
810
17 21 89 93
    Add page 906 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 872
Issue 1
ACTKC : Assignment of Connection Trunk Data for LDM
4. Data Sheet
CONNECTION 
ROUTE
NUMBER 
(C_RT) 
1-1023CONNECTION 
TRUNK 
NUMBER
 (C_TK) 1-4095COUNT 
UP 
STEP 
(STEP) 
1-10CONNECTION
EQUIPMENT
NUMBER
(C_LENS)GROUP
NUMBER 
(GROUP) 
0-31LEVEL
NUMBER 
(LEVEL)
 0-7COUNT 
UP 
TYPE 
(TYPE) 
1-6STATUS
START END START END
START END START END
    Add page 907 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 873
Issue 1
AFCH : Assignment of FCCH Number for Local Data Memory
AFCH: Assignment of FCCH Number for Local Data Memory
1. General
This command assigns the FCCH card that provides the D-channel in the Fusion Network link.
2. Precautions
1. Before executing this command, the trunk for D-channel should be assigned by the ACRD/ACTK
commands.
2. Use sequential numbers starting from 1 at each node.
3. Assign odd numbers for Group and 0 (zero) for Level in the parameter FCHEN.
4. For detailed information, see the NEAX2400 IPX Fusion Network System Manual. 
3. Data Entry Instructions
FCCH NUMBER (FCHN)
              1-255REMARKS
FCHN
The unique number allocated to
the FCH card at each node.FCHEN
LENS of the FCH card.
1
2
3LENS OF FCCH  (FCHEN)
MG U
GL
0
0
00
0
00
0
02
2
37
9
10
0
0
Note:    FCCH can use Expanded LENS (Group 24 - 31)  as well as Physical LENS.
    Add page 908 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 874
Issue 1
AFCH : Assignment of FCCH Number for Local Data Memory
4. Data Sheet
FCCH NUMBER (FCHN)
1-255LENS OF FCCH (FCHEN)
REMARKS
MG U G L
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
    Add page 909 to Favourites
    image text
    Enable zoom 
    							NDA-24298 CHAPTER 4
Page 875
Issue 1
AFPC : Assignment of FCCH Routing Data for Local Data Memory
AFPC: Assignment of FCCH Routing Data for Local Data Memory
1. General
This command assigns the B-channel and the D-channel data for each FPC.
2. Precautions
1. The maximum number of alternative connection trunks is 8 for 1 FPC.
2. The maximum number of the alternative FCH cards is 8 for 1 destination FPC.  (In Fusion Link using the
FCH card.)
3. The maximum number of the alternative FPCs is 8 for 1 destination FPC.  (In Fusion Link using the LANI
card.)
4. When FCCH = 0 (The FCH card is not used), assign the Fusion Point Code Number of the final
destination to the parameter FPCN. 
5. When FCCH = 1 (The FCH card is used), assign the FCCH number to the parameter FCHN.
6. For more detailed information, see the NEAX2400 IPX Fusion Network System Manual.
    Add page 910 to Favourites
    image text
    Enable zoom 
    							CHAPTER 4 NDA-24298
Page 876
Issue 1
AFPC : Assignment of FCCH Routing Data for Local Data Memory
3. Data Entry Instructions
Note 1:“USE_GATE” data is automatically set and this parameter won’t appear on the MAT display.
Note 2:It depends on the assignment on P_ROUTE parameter, whether the direct connection or FCH connection
routing is selected.
In redundant configuration of internal LAN, #A/#B system changeover is to be activated in case all the
routes, both for direct connection and FCH connection, are unable to communicate.
According to the P_ROUTE assignment, the route is selected in the following order;
When “0=FCCH” is selected,
#A direct connection 
→ FCH #A → #B direct connection → FCH #B
or
#B direct connection 
→ FCH #B → #A direct connection → FCH #A
When “1=FGH” is selected,
FCH #A 
→ #A direct connection → FCH #B → #B direct connection
or
FCH #B 
→ #B direct connection → FCH #A → #A direct connection
123
45 678
10           10            10           10            10           10            10            10 
11            11            11           11           11           11            11            11 CONNECTION ROUTE
            (C_RT)
            1-1023 
FCCH NUMBER/FUSION
 POINT CODE NUMBER
(FCHN/FPCN) 1-255/1-253CNT FUSION POINT
  CODE (FPC)
      1-253 FCCH USE OR
NOT USE (FCCH)
          0/1GATEWAY FUNCTION
USE
(USE_GATE)
0/1PRIORITY ROUTE
(P_ROUTE)
0/1
91
FPC
C_RTFCCH
FCHN/FPCN
The Connection Route
(B-channel)If FCCH = 0 (FCH card is not used.),
assign Fusion Point Code Number of the final 
destination node.
If FCCH = 1(FCH card is used),
assign the FCCH number FPC is the unique number allocated 
to each node.
Assign FPC of the final destination
node in this parameter.0 = The FCH card is not used
1 = The FCH card is used
USE_GATE
0 = Gateway Function is not used
1 = Gateway Function is used
Note 1P_ROUTE
0 = FCCH
1 = FGH
Note 2
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Ipx Office Data Specification