Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1718
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Features and technical reference 
    1587 Voice Message Retrieval 
    20
    If your system has a voice-synthesizer circuit pack and LWC Activation is 
    active, users can retrieve messages from two locations:
    — Users can retrieve LWC messages with Voice Message Retrieval.
    — Users can retrieve all other messages with AUDIX.
    If you do not have a TN725B speech-synthesizer board, non-display phone 
    users cannot retrieve LWC messages sent via the LWC button on a phone.
    nBridged Call Appearance
    Voice Message Retrieval on a Bridged Call Appearance functions the same 
    as if it were activated by the primary extension associated with the bridged 
    call appearance.
    nLeave Word Calling
    Voice Message Retrieval enhances LWC by allowing any authorized 
    touch-tone phone user to retrieve messages.
    Related topics
    Refer to ‘‘
    Audible Message Waiting’’ on page 1162 for information about letting 
    users know they have messages.
    Refer to ‘‘
    Feature Access Code’’ on page 633 for information about and field 
    descriptions on the Feature Access Code screen. Complete the LWC Message 
    Retrieval Lock, LWC Message Retrieval Unlock, Voice Coverage Message 
    Retrieval Access Code, and Voice Principal Message Retrieval Access Code fields 
    on this screen to administer voice message retrieval.
    Refer to ‘‘
    Feature-Related System Parameters’’ on page 646 for information 
    about and field descriptions on the Feature-Related System Parameters screen. 
    Complete the Stations With System-Wide Retrieval Permission and Message 
    Waiting Lamp Indicates Status For fields on this screen to administer voice 
    message retrieval.
    Refer to ‘‘
    Station’’ on page 894 for information about and field descriptions on 
    the Station screen. Complete the Security Code field on this screen to administer 
    voice message retrieval. 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Features and technical reference 
    1588 Voice Messaging Systems 
    20
    Voice Messaging Systems
    DEFINITY ECS supports several Lucent voice or multimedia messaging systems. 
    These systems allow users to send, retrieve, store, and forward messages, as well 
    as perform many other tasks associated with messages. In addition to supporting 
    multiple AUDIX systems, DEFINITY can have multiple hunt groups associated 
    with a single AUDIX system. This allows partitioning of the voice ports into 
    different hunt groups and different coverage paths to cover different voice ports. 
    Thus voice ports can be reserved for particular users or groups of users (for 
    example, those that use unique coverage paths). 
    The following features do not use coverage paths:
    nTransfer into AUDIX with the feature access code or the GOTO COVER 
    button
    nLast Call
    If a local AUDIX and a remote AUDIX use the same hunt-group numbers, calls 
    route to the local hunt group.
    DEFINITY ECS supports the following systems:
    I
    NTUITY 
    AUDIXINTUITY AUDIX runs on a separate MAP/5, MAP/40, or 
    MAP/100 PC. The switch communicates with I
    NTUITY AUDIX 
    via analog voice ports and a data link. The switch can also 
    communicate with I
    NTUITY AUDIX without the data link. In 
    this case, the switch and I
    NTUITY AUDIX communicate by 
    sending and receiving special strings of touch-tone codes (dual 
    tone multifrequency tones) via analog voice ports. These 
    touch-tone codes are called mode codes and carry data such as 
    calling party ID, called party ID, and type of call. 
    I
    NTUITY AUDIX allows up to 64 ports. This means up to 64 
    people can be simultaneously retrieving or leaving messages. 
    I
    NTUITY AUDIX also supports fax and e-mail messaging.
    For more information, refer to I
    NTUITY AUDIX System 
    Description or I
    NTUITY AUDIX Administration, and INTUITY 
    Messaging Solutions Integration with System 75, Generic 1 
    and 3, and R5/6. 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Features and technical reference 
    1589 Voice Messaging Systems 
    20
    Other non-Lucent messaging systems may also use mode codes to work with 
    DEFINITY ECS. 
    Centralized Voice Mail
    You can use a single voice mail system to support multiple DEFINITY systems in 
    a DCS network. In addition, you can use a voice mail system to support multiple 
    DEFINITY systems and Merlin Legend in a network via mode code. For more 
    information, see Appendix B in DEFINITY ECS R8.2 Administration for Network 
    Connectivity. DEFINITY 
    AUDIX(Not available with Guestworks) DEFINITY AUDIX runs on a 
    multifunction circuit pack assembly. This assembly fits into 2 
    contiguous slots in the DEFINITY switch. DEFINITY AUDIX 
    communicates with the switch via analog voice ports with a 
    data link. DEFINITY AUDIX can also communicate 
    exclusively via analog voice ports when set up to emulate a 
    digital phone set.
    DEFINITY AUDIX allows up to 16 ports.
    For more information, refer to DEFINITY AUDIX System 
    Feature Descriptions, DEFINITY AUDIX System 
    Administration, Switch Administration for DEFINITY AUDIX 
    System, or DEFINITY AUDIX System Forms Reference.
    Octel 
    SerenadeOctel Serenade is a voice messaging system that supports 
    DEFINITY systems via QSIG signaling protocols.
    Octel 100 Octel 100 runs on personal computer running the OS2 
    operating system. 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Features and technical reference 
    1590 Voice Messaging Systems 
    20
    Security Measures
    !SECURITY ALERT:
    Fraudulent long-distance calls can be placed through I
    NTUITY 
    AUDIX, DEFINITY AUDIX, and AUDIX R1 if proper security 
    precautions are not implemented.
    The following actions help secure your system from unauthorized use.
    nFor INTUITY AUDIX, DEFINITY AUDIX, and AUDIX R1
    — Remove any unused or unassigned mail to help prevent exchange of 
    information through unassigned Voice Mail.
    — Secure system lines that serve AUDIX and control where calls can 
    be placed. 
    — Assign a restrictive Class of Restriction (COR), Class of Service 
    (COS), and Facilities Restriction Level (FRL) to the station lines 
    and trunks serving AUDIX. 
    — Use switch Call Detail Recording (CDR) reports to determine if the 
    lines are being used for calls that are normally not within your 
    sphere of business.
    — Change default passwords on voice mailboxes immediately after 
    installation and use random numbers for passwords.
    — Require passwords with at least 5 digits.
    — Change system administration passwords to alphanumeric codes.
    —I
    NTUITY AUDIX, AUDIX R1, and DEFINITY AUDIX provide a 
    maintenance/administration port. A remote port security device 
    provides an added layer of security to prevent unauthorized access 
    to this port.
    nFor INTUITY AUDIX and DEFINITY AUDIX
    — Determine whether to only allow transfers to other AUDIX 
    subscribers or to any extension of the correct length. The most 
    secure approach is to only allow transfers to other AUDIX 
    subscribers. If you decide to allow transfers to any extension, 
    administer the COR on the AUDIX ports to prevent calls outside the 
    PBX or immediate Distributed Communications System (DCS) site 
    network. 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Features and technical reference 
    1591 Voice Messaging Systems 
    20
    nFor AUDIX only
    — Activate Enhanced Call Transfer (ECT) to help prevent having 
    billable calls placed from unauthorized transfers outside of the 
    system. ECT performs call transfer over the data link between 
    AUDIX and the DEFINITY ECS. (The destination extensions must 
    be administered on the switch dial plan.)
    Interactions
    nAttendant Conference
    An attendant who has split a call can conference the call with AUDIX by 
    dialing the Transfer Into AUDIX access code. The attendant presses 
    Release to drop out of the conference call.
    nAutomatic Call Distribution (external AUDIX only)
    You can administer a hunt group as an AUDIX ACD split. You can then 
    obtain AUDIX traffic measurements with the ACD Call Management 
    System. Login occurs when AUDIX signals the switch to make a voice 
    port available for AUDIX service. Logout occurs when AUDIX signals the 
    switch to disable the port.
    AUDIX and ACD CMS must be connected to the same switch. If AUDIX 
    in the DCS feature is active, a CMS located on a switch other than the host 
    switch (AUDIX location) does not provide measurements for the AUDIX 
    ports.
    Because AUDIX frequently takes voice ports in and out of service for 
    maintenance testing, high login activity may be seen for the AUDIX split 
    in the measurement reports.
    On CMS reports that display an agent’s login ID, AUDIX voice ports 
    always show a login ID that is the same as the extension, even if you have 
    not administered login IDs on the switch.
    nCall Coverage
    When a coverage call successfully completes to AUDIX or routes from a 
    remote switch to the host switch because of coverage, the principal is 
    dropped from the call (no temporary bridge appearance is maintained).
    Coverage calls from a remote switch that fail to reach AUDIX as a 
    coverage point cannot be returned to the original coverage path on the 
    remote switch.
    nCall Forwarding
    An AUDIX user can forward calls to a remote AUDIX hunt group or to the 
    host AUDIX hunt group. You must correctly administer the AUDIX 
    destination for the remote AUDIX hunt group. 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Features and technical reference 
    1592 Voice Messaging Systems 
    20
    nCall Monitoring
    Call Monitoring allows users to pick up the handset after the call goes to 
    AUDIX to listen to the message being left by the caller. This allows the 
    user to determine whether they want to talk to the caller or let them 
    complete their message.
    nCall Transfer
    A call transfer out of AUDIX can be to a UDP extension. If the UDP 
    extension is on a remote switch, the call is treated as a direct call. 
    Additional trunks are used for calls transferred between DCS nodes.
    Calls may be transferred into AUDIX by users handling redirected calls for 
    principals who are AUDIX subscribers.
    nClass of Restriction
    A high FRL assigned in the COR allows callers to transfer to long-distance 
    numbers.
    To prevent toll fraud, assign a low FRL to the AUDIX system ports.
    nDCS — Leave Word Calling (external only)
    In a DCS network, the called party may be on a different switch than the 
    calling party. If the DCS link is down, attempts to store Leave Word Cancel 
    messages are denied and intercept tone is returned. LWC requests are 
    always denied for principals with AUDIX LWC; in some instances, the 
    request to cancel LWC may appear to be active when it actually is not.
    When the local switch communicates with I
    NTUITY AUDIX via mode 
    codes, I
    NTUITY AUDIX cannot support remote DCS switches.
    nFacility Test Call
    Unauthorized calls can be placed using the facility test-call access code.
    To prevent toll fraud, remove the facility test call access code.
    nLeave Word Calling
    You can have a principal’s LWC messages kept by AUDIX. The principal 
    can retrieve a message by calling AUDIX. The principal cannot retrieve the 
    message using other retrieval methods, but is notified of its existence by 
    AUDIX.
    For other messaging services, you can have AUDIX report the existence of 
    waiting LWC messages for the principal, but not the message content. The 
    principal can retrieve the message using other retrieval methods, but is still 
    notified of the existence of AUDIX messages.
    If the data link between the system and AUDIX is down, attempts to 
    activate LWC for an AUDIX-covered principal are denied and reorder tone 
    is returned. 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Features and technical reference 
    1593 Voice Messaging Systems 
    20
    If a caller attempts to cancel a LWC message sent to AUDIX, the caller 
    receives intercept tone if the called party is on the same switch. The caller 
    receives confirmation tone if the called party is on another switch in the 
    DCS network as long as the DCS data link to the called party’s switch is 
    operational, even though the message is not actually canceled.
    When the local switch communicates with I
    NTUITY AUDIX via mode 
    codes, I
    NTUITY AUDIX does not accept or store LWC messages in user 
    mailboxes.
    nRingback Queueing
    Ringback Queueing does not apply to AUDIX calls. On direct calls to a 
    remote AUDIX, if all trunks to the host AUDIX are busy, busy tone is 
    returned. On coverage calls, if all trunks are busy, AUDIX is treated as a 
    busy coverage point. If there are coverage points after AUDIX, then the 
    call terminates at those points.
    nSingle-Digit Dialing and Mixed-Station Numbering
    AUDIX is designed for use with a Uniform Dial Plan. It supports only one 
    extension length (3-, 4-, or 5-digit) that is used by AUDIX subscribers. 
    Single-Digit and Mixed Station Numbering cannot be used. However, 
    nothing prohibits connecting a switch to AUDIX that provides these 
    features, as long as all AUDIX subscribers have the same extension length.
    nTemporary Bridged Appearance
    Stations that normally have a temporary bridged appearance with their 
    coverage point do not have that appearance if the coverage point is 
    AUDIX.
    Related topics
    Refer to ‘‘
    Audible Message Waiting’’ on page 1162 for information about letting 
    users know they have messages.
    Refer to ‘‘
    Voice Message Retrieval’’ on page 1586 for information about 
    retrieving messages.
    Refer to I
    NTUITY Integration with System 75 and DEFINITY Communications 
    System for the procedures on how to administer the switch for voice messaging for 
    Intuity AUDIX.
    Refer to Switch Administration for the DEFINITY AUDIX System for the 
    procedures on how to administer the switch for voice messaging for DEFINITY 
    AUDIX.
    Refer to Switch Administration for AUDIX Voice Messaging for the procedures on 
    how to administer the switch for voice messaging for AUDIX R1. 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Features and technical reference 
    1594 Voice Messaging Systems 
    20
    Refer to ‘‘Data modules’’ on page 572 for information about and field 
    descriptions on the Data Modules screen. Complete this screen (for one AUDIX 
    link) to administer the switch for voice messaging.
    Refer to ‘‘
    Packet Gateway Board’’ on page 859 for information about and field 
    descriptions on the Packet Gateway Board screen. Complete all fields on this 
    screen to administer the switch for voice messaging.
    Refer to ‘‘
    Mode Code Related System Parameters’’ on page 825 for information 
    about and field descriptions on the Mode Code Related System Parameters screen. 
    Complete all fields on this screen to administer the switch for voice messaging.
    Refer to ‘‘
    Hunt Group’’ on page 708 for information about and field descriptions 
    on the Hunt Group screen. Complete all fields (as required) on this screen to 
    administer the switch for voice messaging.
    Refer to ‘‘
    Class of Service’’ on page 545 for information about and field 
    descriptions on the Class of Service screen. Complete the Call Fwd-All Calls field 
    on this screen to administer the switch for voice messaging.
    Refer to ‘‘
    Coverage Path’’ on page 565 for information about and field 
    descriptions on the Coverage Path screen. Complete all fields on this screen to 
    administer the switch for voice messaging.
    Refer to ‘‘
    Trunk Group’’ on page 980 for information about and field descriptions 
    on the Trunk Group screen. Complete all fields on this screen to administer voice 
    messaging for a DCS configuration. 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Features and technical reference 
    1595 Whisper paging 
    20
    Whisper paging
    Whisper paging allows one user to interrupt or “barge in” on another user’s call 
    and make an announcement. The paging user dials a feature access code or 
    presses a feature button, then dials the extension they want to call.
    Only the person on the paged extension can hear the page: other parties on the call 
    cannot hear it, and the person making the page cannot hear anyone on the call. If 
    the paged user has a display phone, he or she can see who is making the whisper 
    page.
    For example, let’s say users A and B are on a call. C has an urgent message for A 
    and makes a whisper page. All 3 users hear the tone that signals the page, but only 
    A hears the page itself. The person making the page, C, cannot hear A or B.
    Brief description
    Allowing users to make whisper pages
    To make a whisper page users dial a feature access code or press a feature button, 
    then dial the extension of the user they are trying to reach.
    nTo assign a feature access code, enter a code in the Whisper Page 
    Activation Access Code field on the Feature Access Code screen.
    nTo give users a feature button for making a whisper page, use the Station 
    screen and administer a Whisper Page Activation button on users’ phones. 
    Allowing users to answer whisper pages 
    quickly
    To give users a feature button for answering a whisper page, use the Station screen 
    and administer an Answerback button on users’ phones. 
    NOTE:
    You cannot administer an Answerback button on an attendant console. 
    Attendants can make whisper pages but cannot receive them.
    Normally, before a paged user can answer a whisper page he or she must complete 
    the active call or put it on hold. However, you can give users the ability to put an 
    active call on hold and speak directly to the person making a whisper page simply 
    by pushing a feature button. Once the Answerback button is pressed, the user can 
    treat both the paging call and the original call as separate calls and all call-related 
    features (conference, transfer, etc.) operate normally. 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Features and technical reference 
    1596 Whisper paging 
    20
    Allowing users to block whisper pages
    To give users a feature button to block incoming whisper pages, use the Station 
    screen and administer a Whisper Page Off button on users’ phones.
    Administer this function on a feature button with a lamp so that users can tell 
    whether or not blocking is active. Users can activate blocking even when they’re 
    on a call.
    NOTE:
    You cannot administer a Whisper Page Off button on a soft key.
    Two features, Do Not Disturb and Privacy — Attendant Lockout, also block 
    incoming whisper pages.
    Call redirection overrides
    If a paged user is not on an active call, a whisper page is converted to a priority 
    call that overrides any of the following call redirection features:
    nCall Forward All Calls
    nCall Forward Busy
    nCall Forward Don’t Answer
    nSend All Calls
    nGo To Cover
    nCall Coverage
    For example, let’s say Call Forwarding — All Calls is activated on a phone. If 
    there are no active calls, a whisper page to that phone will ring at that phone as a 
    priority call. For information on blocking incoming whisper pages, refer to 
    ‘‘
    Allowing users to block whisper pages’’.
    Group answering environments
    Whisper paging does not work with extensions assigned to a group answering 
    environment. You cannot place a whisper page to the main extension assigned to a 
    hunt group, split, skill, or terminating extension group. You cannot place a 
    whisper page to any extension that is a member of one of these groups.
    Network restrictions
    Whisper paging does not work across networks (such as Distributed 
    Communication System networks or Electronic Tandem Networks): both the 
    paging user and paged user must be on the same switch.  
    						
    All Lucent Technologies manuals Comments (0)

    Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual