Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1718
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Command reference 
    1067  
    18
    Modem Pool Group
    Multifrequency-Signaling-Related System 
    Parameters
    Music Sources
    Action Object Qualifier
    add modem-pool num [1-MAX]
    change modem-pool num [1-MAX]
    display modem-pool num[1-MAX] [’print’ or ’schedule’]
    list modem-pool num [’print’ or ’remove’]
    remove modem-pool num [1-MAX]
    Action Object Qualifier
    change system-parameters multifrequency-signaling
    display system-parameters multifrequency-signaling [’print’ or 
    ’schedule’]
    Action Object Qualifier
    change music-sources —
    display music-sources [print or schedule] 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Command reference 
    1068  
    18
    Packet Gateway Board
    Partition Route Table
    Pickup Group
    Action Object Qualifier
    add pgate Enter the circuit pack cabinet, carrier, and slot
    change pgate Enter the circuit pack cabinet, carrier, and slot
    display pgate Enter the circuit pack cabinet, carrier, and slot
    remove pgate Enter the circuit pack cabinet, carrier, and slot
    Action Object Qualifier
    change partition-route-table[‘index’ (1-2000)]
    display partition-route-table [‘index’ (1-2000)] [’print’ or ’schedule’]
    Action Object Qualifier
    add pickup-group 1-MAX (or ‘next’)
    change pickup-group 1-MAX
    display pickup-group 1-MAX [’print’ or ’schedule’]
    list intercom-group [1-MAX][’number’ x][’to-number’ x][’count’ n] 
    [’print’ or ’schedule’]
    remove pickup-group 1-MAX 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Command reference 
    1069  
    18
    PRI Endpoint
    Remote Access
    Remote Call Coverage Table
    RHNPA Table
    Action Object Qualifier
    add pri-endpointextension or ’next’
    change pri-endpoint extension
    display pri-endpoint extension [’print’ or ’schedule’]
    list pri-endpoint extension [’count’ X][’print’ or ’schedule’]
    remove pri-endpoint extension
    Action Object Qualifier
    change remote-access —
    display remote-access [’print’ or ’schedule’]
    list remote-access —
    status remote-access [’print’]
    Action Object Qualifier
    change coverage remote
    display coverage remote
    Action Object Qualifier
    change rhnpa Enter RHNPA and office code n:xyy n(1-MAX) x(0-MAX) 
    y(0-MAX) y(0-MAX) 
    display rhnpa Enter RHNPA and office code n:xyy n(1-MAX) x(0-MAX) 
    y(0-MAX) y(0-9) [’print’ or ’schedule’] 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Command reference 
    1070  
    18
    Route Pattern
    Second Digit Table
    Security-Related System Parameters
    Site Data
    Action Object Qualifier
    change route-pattern 1-MAX
    display route-pattern 1-MAX [print]
    list route-patternEnter [‘trunk’ (1-MAX)] [‘service’/feature name 
    string] [‘print‘ or ‘schedule’]
    Action Object Qualifier
    add second-digit 0-9
    change second-digit 0-9
    display second-digit [print or schedule]
    Action Object Qualifier
    change system-parameters security —
    display system-parameters security [‘print’ or ‘schedule’]
    Action Object Qualifier
    change site-data —
    display site-data [‘print’ or ‘schedule’] 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Command reference 
    1071  
    18
    Station
    System Parameters Call Coverage/Call 
    Forwarding
    System Parameters Country-Options
    System Parameters Crisis Alert
    Action Object Qualifier
    add stationextension (or ‘next’)
    change station extension
    display station extension [’print’ or ’schedule’]
    Action Object Qualifier
    change system-parameters coverage-forwarding —
    display system-parameters coverage-forwarding [’print’ or ’schedule’]
    Action Object Qualifier
    display system-parameters country-options [’print’ or ’schedule’]
    Action Object Qualifier
    change system-parameters crisis-alert —
    display system-parameters crisis-alert [’print’ or ’schedule’] 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Command reference 
    1072  
    18
    System Parameters Customer-Options
    Telecommuting Access
    Tenant
    Terminal Parameters
    Action Object Qualifier
    display system-parameters customer-options[’print’ or ’schedule’]
    Action Object Qualifier
    add telecommuting-access
    change telecommuting-access
    display telecommuting-access x[print or schedule]
    remove telecommuting-access
    Action Object Qualifier
    change tenant x
    display tenant  x[print or schedule]
    Action Object Qualifier
    display terminal-parameters 603/606/302B1 [print’ or ’schedule’]
    display terminal-parameters 8400 [‘print’ or ’schedule’]
    display terminal-parameters 6400 [‘print’ or ’schedule’] 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Command reference 
    1073  
    18
    Terminating Extension Group
    Time of Day Coverage Table
    Time of Day Routing Plan
    Action Object Qualifier
    add term-ext-group1-32 (or ‘next’)
    change term-ext-group 1-32
    display term-ext-group 1-32 [’print’ or’ schedule’]
    list term-ext-group [1-32][’number’ x][’to-number’ x]
    [’name’ x][’ext’ x][’to-ext’ x][’count’ n]
    [’print’ or ’schedule’]
    remove term-ext-group 1-32
    Action Object Qualifier
    add coverage time-of-day 1 - 999
    change coverage time-of-day 1 - 999
    display coverage time-of-day 1 - 999
    remove coverage time-of-day 1 - 999
    Action Object Qualifier
    display time-of-day [‘print’ or ‘schedule’]
    display time-of-day 1-MAX (plan number) [’print’ or ’schedule’]
    change time-of-day [time of day routing plan (1-MAX)] 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Command reference 
    1074  
    18
    Toll Analysis
    Trunk Groups
    Vector Directory Numbers
    Action Object Qualifier
    change tollEnter digits between 0-9, ‘x’, or ‘X’ [‘min’ 1-23]
    display toll Enter digits between 0-9, ‘x’, or ‘X’ [‘min’ 1-23] 
    [’print’ or ‘schedule’]
    list toll toll-list [‘start’ dialed-string] [‘count’ (1-1000)] 
    [‘print’ or ‘schedule’]
    list toll all [‘start’ dialed-string] [‘count’ (1-1000)] 
    [‘print’ or ‘schedule’]
    list toll 
    restricted-call[‘start’ dialed-string] [‘count’ (1-1000)] 
    [‘print’ or ‘schedule’]
    list toll 
    unrestricted-
    call [1-10][‘start’ dialed-string] [‘count’ (1-1000)] 
    [‘print’ or ‘schedule’]
    Action Object Qualifier
    add trunk-group 1–MAX (or ‘next’)
    change trunk-group 1–MAX or TAC X...
    display trunk-group 1–MAX [’number’ X][’to-number’ X][’count’ N] 
    [’tac’ assigned TAC][’print’ or ’schedule’]
    list trunk-group [’print’ or ’schedule’]
    remove trunk-group 1–MAX or TAC X...
    Action Object Qualifier
    add vdn extension (or ‘next’)
    change vdn extension
    display vdn extension [’print’ or ’schedule’] 
    						
    							Phone reference 
    1075  
    19
    DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    19
    Phone reference
    This reference section describes many of the telephones and adjuncts that you can 
    connect to the DEFINITY ECS. 
    Use this section to:
    ndetermine where to connect a phone—is it analog, digital, or hybrid? is it 
    designed for a 2-wire or 4-wire environment?
    ndetermine whether a phone will fit your users’ needs—does it 
    accommodate enough feature buttons? does it include a display?
    nunderstand how to assign the user’s feature buttons—how do the buttons 
    on the Station screen map to buttons on the physical phone. 
    Because you need to know how the physical buttons on the phone relate to your 
    button assignments on the Station screen, this section includes figures for those 
    phones to which you can assign feature buttons. If you want more information 
    about a particular phone or see a diagram of a phone that is not pictured in this 
    section, refer to the DEFINITY ECS Terminals and Adjuncts Reference.
    This section includes descriptions of the following telephones:
    nMultibutton Electronic telephones (MET phones) (page 1076)
    n500 telephones (page 1077)
    n2500-series telephones (page 1077)
    n6200-series telephones (page 1077)
    n6400-series telephones (page 1081)
    n7100-series telephones (page 1085) 
    						
    							DEFINITY ECS Release 8.2
    Administrator’s Guide  555-233-506  Issue 1.1
    June 2000
    Phone reference 
    1076 Multibutton electronic telephones 
    19
    n7300-series telephones (page 1085)
    n731x-series hybrid telephones (page 1089)
    n7400-series telephones (page 1094)
    nISDN telephones (7500-series & 8500-series) (page 1110)
    n8110 telephones (page 1115)
    n8400-series telephones (page 1115)
    nCALLMASTER telephones (page 1122)
    nCordless telephones (page 1126)
    nInternet Protocol (IP) SoftPhones (page 1129)
    Multibutton electronic telephones
    10-MET telephone
    The 10-multibutton electronic telephones (MET) are basic phones that have 10 
    feature buttons. You can assign call-appearances or features to the first five 
    buttons. The last 5 buttons are fixed features.
    20-MET telephone
    The 20-multibutton electronic telephones (MET) are basic phones that provide up 
    to 20 feature buttons. You can assign call-appearances or features to the top five 
    buttons in the first column. The bottom 5 buttons in the first column are fixed 
    feature buttons that you cannot change. However, you can assign features to the 
    second column of buttons (10); these correspond to feature button assignments 1 
    through 10 on the switch.
    30-MET telephone
    The 30-multibutton electronic telephones (MET) are basic phones that provide up 
    to 30 feature buttons. You can assign call-appearances or features to the top five 
    buttons in the first column. The bottom 5 buttons in the first column are fixed 
    feature buttons that you cannot change. However, you can assign features to the 
    second column (1 to 10) and third column of buttons (11 to 20); these correspond 
    to feature button assignments 1 through 20 on the switch. 
    						
    All Lucent Technologies manuals Comments (0)

    Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual