Panasonic Cpc+AII/B Digital Business System Release Notes Manual

							ContentsSection 300~Installation
Chapter 4. Trunks and Lines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-I
Trunks.....................................................................................................................................4-3
Trunk Connectors.............................................................................................................4-3
Tmnk Connector Pinouts..................................................................................................4-4
Loop-Start Trunks.............................................................................................................4-7
Ground Start and DID Trunks..........................................................................................4-9
Tl Interface.....................................................................................................................4-l1
Lines......................................................................................................................................4-31
Extension Connectors.....................................................................................................4-3 1
ExtensionConnectorPinouts..........................................................................................4-32
Analog Extensions..........................................................................................................4-37
Digital Extensions...........................................................................................................4-40
Trunk and Line Expansion
..............................................................................................4-43
Chapter 5. Peripheral Equipment. . . . . . . . . . . . . . . . . . . . ...*.....5-I
Local Terminal or SMDR Device...........................................................................................5-3
Guidelines.........................................................................................................................5-3
Installation........................................................................................................................5-4
RemoteAdministrationInterface(RAI).................................................................................5-6
Guidelines.........................................................................................................................5-6
Installation........................................................................................................................5-6
BackgroundMusic/Music-On-Hold.......................................................................................5-8
Guidelines.........................................................................................................................5-8
Installation........................................................................................................................5-8
Off-Premises Adaptor (OPX)...............................................................................................5-10
Guidelines.......................................................................................................................5-10
Installation......................................................................................................................5-11
Paging...................................................................................................................................5-14
Guidelines
.......................................................................................................................5-14
External Page Zone Installation.......................................................................................5-14
External General Page/UNA Installation........................................................................5-16
External Ringer (UNA Device)............................................................................................5-17
Guidelines.......................................................................................................................5-17
Installation......................................................................................................................5-18
Power Failure Unit................................................................................................................5-19
Guidelines.......................................................................................................................5-19
Installation......................................................................................................................5-19
Voice Announce Unit (VAU)...............................................................................................5-22
Guidelines.......................................................................................................................5-22
Installation......................................................................................................................5-22
Recording and Playing Messages
...................................................................................5-26
Door Box Adaptor (Trunk Port)...........................................................................................5-27
Guidelines.......................................................................................................................5-27
ivDBS Manual - Issued 8/l/95DBS-70-300 
						

							Section 300~InstallationContents
Installation......................................................................................................................
5-28
DoorBoxAdaptor(ExtensionPort).....................................................................................5-31
SingleLineTelephoneAdaptor............................................................................................5-34
Chapter 6. Double-Cabinet SystemsL . . . . . . . . . . . . . . . l , ,....6-1Guidelines...............................................................................................................................
6-3Installation............................................................................................................................
6-10Chapter 7. Specifications
. ..s...........*..........s......*.......7-lElectrical Characteristics........................................................................................................
7-3EnvironmentalRequirements.................................................................................................
7-4
ResourceMaximums..............................................................................................................
7-5Cabling Specifications..........................................................................................................
7-13CommunicationParameters..................................................................................................
7- 14Signaling Characteristics......................................................................................................
7-15Tone Characteristics.............................................................................................................
7-16
DES-70-300DE% Manual - Issued 8/l/95V 
						

							List of FiguresSection 400-Programming
Figure 2-l.
Figure 2-2.
Figure 2-3.
Figure 2-4..
Figure 3-l.
Figure 3-2.
Figure 3-3.
Figure 3-4.
Figure 3-5.
Figure 3-6.
Figure 3-7.
Figure 3-8.
Figure 3-9.
Figure 3- 10.
Figure 
3- 11.
Figure 
3- 12.
Figure 3-13.
Figure 3- 14.
Figure 3-l 5.
Figure 
3- 16.
Figure 3-17.
Figure 3-18.
Figure 4- 1.
Figure 4-2.
Figure 4-3.
Figure 4-4.
Figure 4-5.
Figure 4-6.
Figure 4-7.
Figure 4-8.
Figure 4-9.
Figure 
4- 10.
Figure 
4- 11.
Figure 4-12.
Figure 4- 13.
Figure 
4- 14.
Figure 
4- 15.
Figure 
4- 16.
Figure 
4- 17.
Figure 
4- 18.
Figure 5-l.
List of Figures
viDBS Manual - issued 8/l/95DBS-70-300
TheDBScabinet(DBS96shown).................................................................2-3
TheDBScabinet(DBS96shown).................................................................2-3
Trunk,line,andperipheralconnections..........................................................2-4
Slot
labelsforprintedcircuit packages...........................................................2-9
Coverremoval.................................................................................................3-3
Cabinet mounting bracket...............................................................................3-4
Cabinet wall-mounting...................................................................................3-4
Cabinet ground screw.....................................................................................3-5
SCC-BSwitch4..............................................................................................3-6
CPCStrapSl..................................................................................................3-7
Printedcircuitcardinstallation.......................................................................3-8
Batterylocation,DBS40..............................................................................3-10
Batterytray,DBS72and96.........................................................................3- 11
Battery pack connection,DBS72and96.....................................................3-12
Wall-mountadaptorremoval........................................................................3- 13
Wall-mountadaptorreplacement..................................................................3- 14
Handset guideinsertionfor wall-mounting, key phone................................3- 14
Desk stand removal forDSLT wall mounting..............................................3- 15
Deskstandattachment for DSLT wallmounting.........................................3- 16
Handset guideinsertionfor wall-mounting,DSLT......................................3- 16
CPCmemoryclearswitch............................................................................3- 17
Test telephoneconnection..........................:.................................................3- 19
DBStrunkconnections(DBS96)...................................................................1-3
L-TRKCardStrapJlandSwitchLocations.................................................-t-7
AttachingCallerIDCardtothe L-TRKCard................................................4-8
-48Vpower supply installation
......................................................................4-10
Connector 4 (CN4) strapping, Sync Unit......................................................d-21Tl
SyncUnitinstallation...............................................................................4-22Tl
MDFcardinstallation..............................................................................4-23
Sync
Unit and Tlconnection, single-cabinet installation............................-f-24
RJ48pinouts,CNlconnector.......................................................................3-25
Tlcabinet connections,single-cabinet installation......................................-F-26
Sync cable connections, double-cabinet with a Tlin the slave....................-t-28
Clock sync cable and sync cable connections, double-cabinet installation . .4-30
DBS extension connections..........................................................................4-3 1
SLT ringer box installation..........................................................................4-38
EM1 filter .installation (DBS 40 only)...........................................................1-39
DSS/72 connection using one cable with two pairs......................................4-41
EM/24 connectionusingone cablewithtwo pairs.......................................4-42
Trunk or extension expansion.......................................................................4-44
RS-232C connection.......................................................................................5-4 
						

							Section 300~InstallationList of Figures
Figure 5-2.
Figure 5-3.
Figure 5-4.
Figure 5-5.
Figure 5-6.
Figure 5-7.
Figure 5-8.
Figure 5-9.
Figure 
5- 10.
Figure 5-11.
Figure 
5- 12.
Figure 5-13.
Figure 5- 14.
Figure 
5- 15.
Figure 5-16.
Figure 5- 17.
Figure 
5- 18.
Figure 5-19.
Figure 5-20.
Figure 5-2 1.
Figure 6-l.
Figure 6-2.
Figure 6-3.
Figure 6-4.
Figure 6-5.
Figure 6-6.
Figure 6-7.
Figure 6-8.
Figure 6-9.
SMDR Format for CPC-AII and CPC-B Version 3.1or higher.....................
5-5
R4I connection...............................................................................................5-7
Installation of music-on-hold and background music.....................................5-9
Cable punch-out plate, OPX Adaptor...........................................................5- 11
OPXinstallation............................................................................................5- 13
External zone paging installation..................................................................
5-15
External general page/UNA installation.......................................................5-16
External ringer (UNA device) installation....................................................5-18
Cable punch-out plate, Power Failure Unit..................................................
5-20
Power Failure Unit (PFU) installation..........................................................5-21
Cablepunch-out plate,VoiceAnnounce
Unit..............................................
5-24
ExtensioncordconnectiontotheVAU.......................................................5-25
VoiceAnnounceUnit(VAU)installation...................................................5-25
Cable punch-out plate, Door Box Adaptor...................................................5-29
Installation of the door box, door opener, and door sensor..........................
5-30
Cable punch-out plate, Door Box Adaptor...................................................5-3 1
Installation of the door box, door opener......................................................
5-32
ConnectionstotheDoor BoxAdaptor........................................................5-33
Cable punch-out plate, SLTA.......................................................................5-34
SLTA installation.........................................................................................5-36
Slot usage for two-cabinet systems, DBS 40 + DBS 40.................................6-4
Slot usage for two-cabinet systems, DBS 72 + DBS 40.................................6-5
Slot usage for two-cabinet systems, DBS 72 + DBS 72.................................6-6
Slot usage for two-cabinet systems, DBS 96 + DBS 40.................................6-7
Slot usage for two-cabinet systems, DBS 96 + DBS 72.................................6-8
Slot usage for two-cabinet systems, DBS 96 to DBS 96................................6-9
Strap
3,MFRcard.........................................................................................6- 10
Double-cabinet installation...........................................................................6- 11
CBL-S to Connector Panel connection, slave cabinet..................................6-11DBS-70-300DBS Manual 
- Issued &W/95vii 
						

							Table l- 1.
Table 1-2.
Table l-3.
Table 2- 1.
Table 2-2.,
Table 2-3.
Table 2-4.
Table 
3- 1,
Table 4- 1.
Table 4-2.
Table 4-3.
Table 4-4.
Table 4-5.
Table 4-6.
Table 4-7.
Table 4-8.
Table 4-9.
Table 4- 10.
Table 
4- 11.
Table 
4- 12.
Table 4-13.
Table 
4- 14.
Table 4-15.
Table 4-16.
Table 
4- 17.
Table 
4- 18.
Table 
4- 19.
Table 4-20.
Table 4-2 1.
Table 4-22.
Table 5- 1.
Table 5-2.
Table 5-3.
Table 5-4.
Table 5-5.
Table 5-6.
Table 5-7.
Table 5-8.
Table 5-9.
Table 6- 1.
Table 7- 1.
List of Tables
. . .VIIIDBS Manual-Issued 8/l/95DES-70-300
DBS model numbers.......................................................................................l-3
FCC information.............................................................................................l-3
Interface information......................................................................................l-4
Trunk and extension capacities according to system size...............................
2-5
Printed circuit card descriptions and maximums............................................
2-6
Printed circuit package slot usage...................................................................2-8
CPC/SCC features...........................................................................................2-9
Battery backup packages for the DBS 40,72, and 96....................................
3-9
Main trunks and expansion trunks provided with each system type..............4-4
Pinouts and trunk numbers for the main trunk connector...............................4-5
Pinoutsand trunk numbers for trunk expansion connector CNl....................4-6
-48V current consumption for ground-start and DID trunks..........................4-9
-40’ power supplies tested with the DBS......................................................4-9
TlHardware requirementsforsingle-cabinet systems.................................4- 11
Tl Hardware requirements for double-cabinet systems...............................4-12
Tlslotusagefortwo-cabinetsystems..........................................................4- 13
Tlandanalogtrunkassignments, DBS40...................................................4-14
Tl and analog trunk assignments, DBS 72...................................................4-14
Tl and analog trunk assignments, DBS 96...................................................4-15
Maximum Tl assignments for two-cabinet systems.....................................4-15
Tl and analog trunk assignments, DBS 40 + 40...........................................4-16
Tl and analog trunk assignments, DBS 72 + DBS 72..................................4-16
Tl and analog trunk assignments, DBS 96 + DBS 40..................................4-17
Tl and analog trunk assignments, DBS 96 + DBS 72..................................4-18
Tl and analog trunk assignments, DBS 96 + DBS 96..................................4-19
Extension ports provided with each system..................................................4-32
Pinouts and color codes for extension connector CN12...............................4-33
Pinouts and color codes for extension connector CN13...............................4-34
Pinouts and color codes for extension connector CN14...............................4-35
Pinouts and color codes for extension expansion connector CNl................4-36
RS-232CpindesignationsusedforCN6........................................................5-3
RAI compatibility...........................................................................................5-6
Maximum distances for direct connection to OPX stations........................5- 10
Switch settings for SWI, VAU.....................................................................5-22
Switch settings for delay answer timing, VAU............................................5-23
Switch settings for DTMF detection timing, VAU.......................................5-23
Switch settings for wait timing between dialed digits, VAU.......................5-23
Switch settings for abbreviated dialing digit length, VAU...........................5-24
Maximum distances for SLTA installation
...................................................5-35
Trunk and extension port maximums for double-cabinet systems.................6-3
Input power.....................................................................................................7-3 
						

							Section 300~InstallationList of Tables
Table7-2.
Table7-3.
Table7-4.Table 
7-S.
Table7-6.
Table
7-7.
Table7-8.
Table7-9.
Table7- 10.
Table7- 11.
Table7- 12.
Table7- 13.Table
7- 14.
Table7-15.
Table7-16.
Table7-17.
Table
7- 18.Power consumption and heat generation........................................................
7-3Battery backup capacity..................................................................................
7-3Temperature and humidity requirements........................................................
7-4Dimensions and weight, single-cabinet systems and phones.........................7-3
Dimensionsfor two-cabinet systems..............................................................7-4Trunk
andlinecapacities................................................................................7-5Feature-relatedcapacities...............................................................................
7-5Hardwaremaximumsfor single-cabinet systems...........................................
7-7Hardware maximums for double-cabinet systems........................................
7-10Maximumcablingdistances.........................................................................
7- 13Voice path from 
KTELs to DBS...................................................................7-14Datacommunications
ports..........................................................................7- 14Signaling
toCO............................................................................................7- 15Signaling
levels.............................................................................................7- 15Transmissionspecifications..........................................................................
7- 15Tone Plan......................................................................................................
7-16DTMF frequencies........................................................................................
7-17DBS-70-300DBS Manual 
- Issued 8/l/95ix 
						

							List of TablesSection 300~installationXDBS Manual 
- Issued 8/l/95DBS-70-300 
						

							Section 300~InstallationAbout This Manual
About This Manual
Purpose
This manual provides installation instructions for the Digital Business System
(DBS). The following table summarizes the purpose of each chapter.
ChapterTitlePurpose
No.
RequirementsIncludes DBS model numbers and FCC information that
may be required during installation. In addition,
environmental requirements are included to ensure proper
operation.
System OverviewProvides an overview of the DBS. The overview includes
descriptions of the cabinet, system configurations, printed
circuit cards, and the call processor.
Cabinet InstallationExplains how to install and power up the cabinet. Before,
you begin installation, be sure to read Chapter 1 
-
“Requirements.“.
Trunks and LinesDescribes trunk and line installation. See the “Peripheral
Equipment” chapter for instructions on connecting
peripheral equipment through trunks or lines.
PeripheralDescribes peripheral equipment installation. Some
Equipmentperipheral equipment also requires trunk and/or line
interfaces (door phones or power failure units. for
example). For information on trunk and line connections,
see Chapter 4.
Double-CabinetExplains installation procedures for two-cabinet systems.Systems
SpecificationsContains frequently referenced DBS specifications.
Related Documents
For instructions on DBS programming, see Programming Guidance (Section
400).
For detailed descriptions of DBS features, see Feature Operafiou (Srctiorr
700).
DBS-70-300DBS Manual - Issued WV95 .xi. 
						

							Chapter 1, RequirementsThis chapter includes DBS model numbers and FCC information that may be
required during installation. In addition, environmental requirements for proper
operation are included.
This chapter covers the following topics:
PageModel Numbers
1-3FCC Requirements
l-3
Environmental Requirements
1-5
Cleaning1-6DBS-70-300DBS Manual 
- Revised 4/3/96l-1 
						

							1-2DES Manual - Revised 4/3/96DES-70-300