Panasonic Cpc+AII/B Digital Business System Release Notes Manual

							GIWI-w- “b”- v* -
These forms may be reproduced as needed by certified DBS Dealers and Technicians.Table 
1: System Parameters (Part 1)
PARAMETERPBX 
Settings (FFl 26 31)
PBX Access Code 1
PBX Access Code 2
PBX Access Code 3
POSSIBLE ENTRY
Access Code (up to 3 dlgits) (*** - No Entry)
Access Code (up to 3 
dlglts) (*** - No Entry)
Access Code (up to 3 digits) 
(*** - No Entry)
ADDRESS
SETTING
FF1 2# 3x 1c
FM 2x 3x 2#
FFl 2x 3x 3#
IPBX Access Code 4IAccess Code (up to 3 digits) (*** - No Entry)IFF12X 3# 4PII
i-PBX Access Code ,5Access Code (up to 3 digits) (*** - No Entry)
Access Code (up to 3 
diglts) (*** - No Entry)
Access Code (up to 3 digits) 
(*** - No Entry)
IPBX Access Code 6IAccess Code (up to 3 digits) (*** - No Entry)IFFl 213X 6XII
Pause after 1st digit (I), pause after 2nd digit (2),
pause alter 3rd digit (3)
FFl 2f 3X 9#
FFl 2P 3P 1 O#
FFl 2#3#11#
FFl 2f 3X1 2X
Pause after 1st digit (l), pause after 2nd digit (2),pause after 3rd digit (3)
Pause after 1st diglt (l), pause after 2nd digit (2),pause after 3rd digit (3)
Pause after 1st 
dlglt (l), pause after 2nd digit (2),pause after 3rd digit (3)
I
Automatic Pause Position for PBXAccess Codes beginning with 3
Automatic Pause Position for PBXAccess Codes beginning with 4
I
Automatic Pause Position for PBXAccess Codes beginning with 5Pause after 1st digit (l), pause after 2nd digit (2),
I
FFl 26 3P13Xpause after 3rd digit (3)II
Pause after 1st digit (l), pause after 2nd digit (2),pause after 3rd digit (3)FFl 2# 3114X
FF12t 3# 15#
FFl 2#3# 16X
Pause after 1st digh (l), pause after 2nd digit (2),pause after 3rd digit (3)
I
Automatic Pause Position for PBXAccess Codes beginning with 6Pause after 1st diglt (l), pause after 2nd digit (2),pause after 3rd digit (3)
Automatic Pause Position for PBX
Access Codes beginning with 9Pause after 1st digit (I), pause after 2nd digit (2),
I
FFl 2# 3t 17#pause after 3rd dlgit (3)II
FFl 26 3# 16P
I
Automatic Pause Position for PBXPause after 1st digit (1). pause after 2nd digit (2),
Access Codes beginning with 0pause after 3rd digit (3)
Ring Patterns for UNA Terminals(Ml, Cl, & Bl)
External Page interface Control for
Paging Group 0
Intermittent; 1 sec. on, 3 sec. off (0)Continuous (1)
No External Page and Relay Operation (O),External Page and Relay Operation (1)
I
External Page Inter/ace Control forNo External Page and Relay Operation (0),FF12X 4# 3X
Paging Group 1External Page and Relay Operation (1)III
No External Page and Relay Operation (II),External Page and Relay Operatlon (1)
FFl 2# 4t 4%
I
External Page interface Control for
Paging Group 2
External Page Interface Control for
Paging Group 3
External Page Interface Control for
Paging Group 4
No External Page and Relay Operation (II),External Page and Relay Operation (1)
No External Page and Relay Operation (II),External Page and Relay Operation (1)
8DBS-80-450Issued 6/28/96 
						

							These forms may be reproduced as needed by certified DBS Dealers and Technicians.Note: Make certain that features are not in use before disabling. Some features that are disabled from the Class of Service
while in use cannot be 
canceiled (for example, if BGM is removed from COS while in use, BGM cannot be turned off).
Table 2: Extension Class of Service
Extension FeatureIClass of Service # (FF~ 2# 5# (1-8)# (l-21)#)
(Defautt isDisabled-0)12345678
DialTone On/Off,(#50)
FF12#5#(COS)#l#0/1#
Head/HandsetExchange(#51)
Rl 25 M (COS)# 2# (0/1)X
BGM On/Off (#53)
Rl 2# 5# (COS)#3#(OM)#
Absence Message SebReaet(71)
IT1 2#5#(COS)#4# (O/l)#
Call Forward SeUReset(72)
Rl 2#M(COS)#5#(0/1)#
Do Not Disturb (73)
FFl2fM(COS)6i(O/l)#
Station Lockout (74)
FFl 2R 5# (COS)# 78 (OM)#
Park Hold (75)
Rl 2#5# (COS)# 88 (O/l)#
ParkPickup (76)
Rl 2#5#(COS)#9X(0/1)#
MeetMeAnswer(77) 
Rl 2#5#(cos)x1o5(o/l)b
UNA Pickup (78)
RI 2#5#(COS)/llX (O/l)?!
Direct Pickup (79)
FFl 2#5#(COS)I12#(0/1)#
Group Pickup(70)
Al25 5# (COS)R135 (O/1)1
ToneIVoice Mode(l)
Rl 2#5#(cos)14#(o/1)~
Message Waiting Set(2)
FFl 215dr(COS)#15#(OM)X
Busy Override (4)
FF1 2.#5#(COS)J16#(0/1)#
Call Waiting (3)
FFl 2#5x(COS)#17#(O/1)#
OffhookVoice,l
nounce(5)
FFl 2#5#(COS)X18# (O/1)1
Central Off ice Call Queuing (2)
Rl 2x 5# (COS)X 19# (O/l)#
SLTTransfer (8)
FF1 2#5#(COS)#20#(0/1)#
Call Forwarding -External
FFl 2#5P(COS)#21#(0/1)#
Issued 6/28/96DBS-80-450 
						

							“.WY-wL Ye”“A-
These forms may be reproduced as needed by certified DBS Dealers and Technicians.
Table 3: Verified Forced Account Codes
E
n
t
L
r
Y
1
E
n
.t
r
Y
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
E
n4-Digit
tAccount
Code
; (0001-9999)
E
nCOigit
tAccountTRSCode’
Tw
; (OOOl-9999) (o-7)
76
77
CDigit
Account
Code*
(0001.9999)
TRS
Type
(o-7)**
TRS
Type
(o-7)*
2
3
E
4
5
I IStI
6.1 1
I I87I
65
66
67
68
69
70
71
72
73
74
75
*Verified Forced Account Code -- FFl 2# 6# (Entry l-lOO># l# (OOOl-9999)#
**TRS Type for Verified Forced Account Code --FFl 2# 6# (Entry 1-lOO)# 2# (0-7)#. Note that
TRS types 0 and 1 do not allow outgoing calls.
DBS-80-450
Issued 6/28/96 
						

							31revarerage - -01
These forms may be reproduced as needed by certified DBS Dealers and Technicians.
Key 1- DND
OVERRIDE - Key6
Key 2- BGMTALKBACK - Key 7
Key 3- MUTEPSD - Key 8
Key 4- FORWARDSSD - Key 9
Key 5- CONF LOCKOUT - Key 10
Table 4: Custom Large LCD Screen Assignments
Screen Number(2539)
Feature Code
FFl 2#7#1#
(25~39)# (Soft
Key)# 
(Code)++
TextFFI 
2# 7# 2# (25
39)# (Sofl Key)#
(Text)#
Soft Key #
6
Feature Code
FFl 2#7# 1X
(2539)# (Soft
Key)# (Code)#
Text
FFI 2# 7# 2# (25
39)# (Soft Key)#(Text)# .
7
8I
9
10
1Screen Number
(25-39)Feature CodeText
Feature CodeTextSoft Key 
#FFl 2#7#1#FFl 2# 7# 2# (25-Soft Key #FFl 2#7# 1#FFl 2# 7# 2# (25-
(25-39)# (Soft39)# (Soft Key)#(25-39)# (Soft39)# (Soft Key)#Key)# 
(Code)#(Text)#Key)# (Code)#(Text)#
16
27
38
49
5
10 
						

							These forms may be reproduced as needed by certified DBS Dealers and Technicians.
Table 5: Cailer ID Automatic DISA
Phone Number Assignment
Phone Number (Max. 10 Digits)
Il-FFI 2#8#l#(Phone Ng.)#1
2 - FFI 2# 8# 2# (Phone No.)#
3-FF12#8#3#(Phone No.&
4 -FFl 2#8# 4# (Phone No.)#
5-FF12#8#5#(PhoneNo.)#
I6-FF12#8#6#(PhoneNo.)# 1
I7-FFl 2#8#7#(Phone No.)#1
I8-FFl 2#8#8#(Phone No.)#1
I9-FFl 2#8#9#(Phone No.)#I
1 lo-FFl 2#!8#lO#(PhoneNo.)# 1
Table 6: Door Phones
Door Phone 1Door Phone 2Door Phone 3Door Phone 4
Door Phone Extension Port Number
FFl 2#9#(DoorPhone#l-4)X1X(3-144)
Ring on Extension Port(s) .
FFl 2#9#(1-4)#2#(1-144)#(0 orl)#
Door Opener Access Code
(Default -9999)
FFl 2#9#(1-4)#3#(0000-9999)#
Door Phone Tone Type
(Slow Chime - 0, Fast Chime - 1)
FFl 2#9#(1-4)#4#(0 orl)#
Door Phone Ring Time-out
(20 sec. - 3)
FFl 2519x(1-4)#5#(0-15)#
Door Phone Ring Pattern
(4 sec. between rings - 1)
FFl 2#9#(1-4)#6#(0-5)#
Door Opener Relay Timer
(4 sec. - 1)
FFl 2R 9#(1-4)#7#(0-5)#
gate:
See also “Door Opener Access Code Required” setting (FFl 2# l# 40#) on page 3.
.
\12DBS-80-450Issued 6/28/96 .
.;’ 
						

							“ILbYUCVI O&U“L -
These forms may be reproduced as needed by certified DBS Dealers and Technicians.
Table 7: System Parameters (Timers/Access Codes)PARAMETERPOSSIBLE ENTRYPROGRAM
SETTING
System Timers (FFl3Y)
Auto Day Mode Start TimeStart Time (in 24-hour format) (****)RI 3# 29# (0000-2359)P
Auto Night 1 Mode Start TimerStart time (in 24 hour format) 
(****)FFI 3# I# (0000-2359)#Auto Night 2 Mode Start TimeStart Time (in 
24-hour format) (****)RI 3# 30# (OOOO-2359)R
Attnd Hold Recall Timer for CO CallsSee Section 400, (20 sec. - 1)FF 1 3R 21 (O-l 2)#
Attnd Transfer Recall Timer for COSee Section 400, (20 sec. - 1)RI 3# 41 (O-l 2)P
CallsAttnd Park Hold Recall Timer
See Section 400, (20 sec. -1)FFI 3P 8ic (O-l 2)#
Attnd Call Reversion TimerSee Section 400, (190 sec. - 9)FFI 3P 1 OR (O-l 2)RAttnd Hold Recall Timer for Intercom
See Section 400. (40 sec. - 2)FF 1 3P 221 (O-l 2)#
CallsAttnd Transfer Recall Timer for Inter-
See Section 400. (20 sec. - 1)FFI 3% 24P (O-l 2)R
corn CallsAttnd Hunt Group Recall Timer
See Section 400, (20 sec. - 1)FF 1 3R 61 (O-l 2)%
!Zxt Hold Recall Timer for CO CallsSee Section 400, (140 sec. - 7)FFI 3R 31 (O-l 2)R
Ext Transfer Recall Timer for CO CallsSee Section 400, (140 sec. - 7)FFI 3ip 5X (O-l 2)X
Ext Park Hold Recall TimerSee Section 400, (140 sec. - 7)Al 3R 8# (O-l 2)R
Ext Delayed Ring TimerSee Section 400, 
(72 sec. - 2)FFI 3# 27X (O-l 5)R
Ext Hold Recall Timer for IntercomSee Section 400, (140 sec. - 7)FFI 3R 23R (O-l 2)R
Calls
Ext Transfer Recall Timer for Inter-See Section 400, (140 sec. - 7)FFI 3# 25R (O-l 2)#
corn Calls
Ext Hunt Group Recall TimerSee Section 400, (140 sec. 
- 7)FFI 3# 7f (O-1 2)#
Unsupervised Conference TimerSee Section 400, (10 min. - 2)FFI 3C 1 I# (O-l 5)R
Automatic Pause TimerSee Section 400, (3.5 sec. 
- 7)FFI 3# 12f (O-l 5)#
CO Flash TimerSee Section 400. (1 sec. - 9)FFl 3# 13# (O-l 5)X
SLT Onhook Flash TimerSee Section 400, (200 to 1500 ms - 4)FFI 3P 14# (O-6)1
(Power down and restart the system
after changing this parameter)
CO Ring Cycle Detection Timer4 sec. (0), 6 sec. (l), 8 
set (2), 10 setFFl 3115X (O-3)1
(3)
Inbound Ring Cycle Expansion TimerSee Section 400, (350 ms - 7)FFI 3% 1 M (O-l 5)#
Dial Pause TimerSee Section 400, (1.5 sec. 
- 1)FFl 3X 17P (O-l 5)R
PBX Flash TimerSee Section 400, (.6 sec. - 7)FFl 35 18# (O-l 0)#
Call Forward -- No Answer TimerSee Section 400. (12 sec. - 2)FFl 3X 19# (O-l 5)i#
Outbound Ground Start Detection1-8 sec. (4 sec.)FF13#2w’(1-8)#
Timer
-Issued 
6/28/96DBS-80-45013 
						

							These forms may be reproduced as needed by certified DBS Dealers and Technicians.
-I-Remote Programming and DISA Codes (FF141 through FFl 60PARAMETER
7POSSIBLE ENTRY7PROGRAM~ --rziiiJ
Inbound Ground Start DetectionTimerl-8 sec. (4 sec.)FFl 3# 215 (1-8)x
CO Delayed Ring TimerSee Section 400, (12 sec. - 2)FFl 31261 (O-l 6)X
Hunt Group No Answer TimerI~ ~~See Section 400, (12 sec. - 2)IFFl 3R 285’ (O-1 5)RI1
--1
Remote Programming ID Code4-digit ID code, (9999)IFFl 45 (0000-9999)#I ~ ~~~ ~ -7
DISA Inbound Call IDI4-digit ID code1 FFl 5X (0000-9999)P---I
DISA Outbound Call ID Code 14digit ID code, (1111)FFl 6# 1 I (OOOO-9999)R
DISA Outbound Call ID Code 24-digit ID code, (9999)FFl 6# 2R (0000-9999)#
Programming Authorization Code (FFl 7#)
ID Code for System Programming4-digit ID code, (9999)FFl 78 (0000-9999)#
Tl Settings (CPC-B 4.0 or higher/CPC-EX)
System ConfigurationSee Section 400, (DBS 40 - 0)FFl 8R 4# 1 R 1R (O-8)1
Sync Source 1
Tl master cabinet (1) Tlslave cabinetFFl 8X 4# l# 2X (l-3)5
(21, Free run (internal clock) (3)
Sync Source 2None (0), Tl master cabinet (l), TlFFl 8f 4X l# 3# (0-3)#
slave cabinet (2) Free run (internal
clock) (3)
Sync Source 3Trunk Configuration for master
Analog trunks only (0), Tl and AnalogFFl 8# 4# (4)# l# l# (0 or l)#
cabinet (CPC-B 4.0 to 6.02)trunks (1)
Number of 
Tl Channels in master
cabinet
O-24,0 (None)FFl 85 4R (4)R l# 2# (O-24)1None (0), 
Tl master cabinet (l), Tl
slave cabinet (2), Free run (internal .
clock) (3)
FFl 8% 4# l# 4R (O-3)5
Frame Format for master cabinet
Supertrams - 0, Extended SuperframeFFl 8# 4# (4)R l# 3X (0 or 1)R
(ESF) - 1
Frame Format for slave cabinetSuperframe - 0, Extended SuperframeFFl 81 4P (5)P l# 3# (0 or 1)6
(ESF) - 1
Line Coding for master cabinet
1 AMI (0), 682s (1)1 FFl 81 4X (4)C 1X 4R (0 or 1)X 1
Trunk Configuration for slave
cabinet (CPC-B 4.0to 6.02)
Number of Tl Channels in slave
cabinet
Line Coding for slave cabinet
Tl Trunk Type Emulation
Outgoing Signaling Type
Analog trunks only (0), Tl and AnalogFFl 8X 41 (5)# II I# (0 or 1)Xtrunks (1)
O-24,0 (None)FFl 8# 4R (5)R II 2# (O-24)1
AhlI(O), B8ZS (1)FFl 8# 4X (5)# 1X 4/ (0 or 1)XLoop Start (0), (reserved 
-l), GroundFFl 8R 4X 6X (l-64)5 1X (O-
Start (2), E&M (3), E&M Network (4)3)#
Immediate start (0), Wink Start (1),FFI 85 4# 6# (l-64)5 3X (O-
Dial Tone Start (2)w
Incoming Signaling TypeImmediate StarVRingdown (0), WinkFFl 8X 41 6# (1-64)X 4t (0 or
Start (1)w
14DBS-80-450Issued 6/28/96 
						

							“IL&dYcLl,U‘ %b -Ul -
These forms may be reproduced as needed by certified DBS Dealers and Technicians.PARAMETER
Network Re-Sync TimerPOSSIBLE ENTRYPROGRAM
SETTING
Immediate (0) Hourly retries (l-24),FFl 8# 4R 2# 1R (g-25)1
No retries (25)
Disconnect Timer
Guard Timer
ReleaseAcknowledgeTimer
Outpulse Delay TimerWink Time-out Timer
Incoming Detection Timer
Answer 
Supen/ision Timer
Immediate Glare Timer
Wink Glare Timer
Digital Pad Settings
Failure Mode for master cabinetSee Section 400. (200 ms 
- 1)
See Section 400, (1200 ms - 6)
SeeSection400,(240set-9)
See Section 400, (500 ms 
- 2)
See Section 400, (5500 ms 
- 15)
See Section 400, (90 ms 
- 7)
See Section 400, (600 ms 
- 3)
See Section 400, (60 ms 
- 3)
See Section 400, (60 ms 
- 3)See Section 400, (-2 
dB - 16)
Tl continues to operate after errordetected 
(0). Tl shuts down if errors
are detected
FFl 8R 4R 2# 2# (0-12)#
FFl 81 4R 2R 3X (0-15)X
FFl884R2641(O-15)R
FFl 8R 46 2R 5f (O-8)R
FFl 8R 4R 2X 61 (O-15)R
FFl 8R 4% 2R 7R (O-15)R
FFl 8R 41 25 8P (O-8)1
FFl 8B 4R 2R 9R (O-15)R
FFl 8t 4R 2R 10% (O-15)R
FFl 8# 4R 3R (l-12)#(1-12)#Do not
(O-30)Rchange from
default
without
directionfrom
Panasonic
Technical
support.
FFl 8# 4# (4)R l# 51 (0 or 1)R
Remote Loopback for master cabinet
Reserved for future useRl 8R 4# (4)X I# 61 (0 or 1)5Yellow Alarm Send for master
No (0), Yes (1)FFl 8R 41% (4)X l# 7R (0 or l)#
cabinet
Flash Key Operation for master
cabinet
Red Alarm Detection for master
cabinet
Release and reseize (0) future useFFl 8% 4R (4)R l# 8X (0 or l)#
(1)
See Section 400, (6 -2)
FFl 8# 4R (4)# 2f 1X (0-5)#Yellow Alarm Detection for master
cabinetSee Section 400, (50 
ms - 1)FFl 8R 4R (4)X 2f 2R (O-15)1Yellow Alarm Recovery for master
cabinetSee Section 400, (10 ms 
- 1)FFl 8X 4P (4)R 2R 3R (O-15)R
Other Alarms Detection for master
cabinetSee Section 400, (250 ms - 1)FFl 8# 4R (4)R 2X 4# (O-15)R
Other Alarms Recovery for master
cabinet
Frame Loss Counter for master
cabinet
Slip Counter for master cabinetSee Section 400, (250 ms - 1)FFl 8# 4P (4)Y 21 51 (O-15)RO-9000
FFl 8d 4t (4)# 3rf 15 (O-
9000)#
O-9000FFl 8# 4P (4)f 3t 2/ (O-
9000)X
Red Alarm Counter for master0-9000FFl 81 4i (4)f 35 3X (O-
cabinet9000)# 
						

							WeUatePage - -Of
These forms may be reproduced as needed by certified DBS Dealers and Technicians.PARAMETER
Loss of Signal Counter for master
cabinet
Sync Loss Counter for master
cabinetYellow Alarm Counter for master
cabinet
Yellow Alarm Relay for master
cabinetPOSSIBLE ENTRY
O-9000
O-9000
O-9000
Oft (O), On (1)
PROGRAMSE-ITING
FFl 8# 4R (4)R 3% 4R (O-
9000)#
FFl 81 4R (4)# 3R 51 (O-
9000)R
FFl 8# 46 (4)# 35 6# (O-
9000)R
FFl 8X 4% (4)1 4X l# (0 or l)#
Red Alarm Relay for master cabinetOft (01, On (1)FFl 8R 46 (4)P 41 2R (0 or l)#
Sync Loss Relay for master cabinetOft (01, On (1)FFl 8X 45 (4)R 4R 3R (0 or 1)X
Frame Loss Relay for master cabinetOtt 
(Oh On (1)FFl 8R 45 (4)R 4R 4R (0 or l)#
AIS Relay for master cabinetOff (O), On (1)FFl 81 4R (4)R 4R 5# (0 or l)#
Relay Reset for master cabinetAutomatically cleared (0)FFl 8# 4R (4)# 4R 6R (0 or l)#
Manually cleared (1)
Failure Mode for slave cabinet
Tl continues to operate atter errorFFl 86 4# (5)X 1X 59 (0 or l)#detected (0), 
Tl shuts down if errors
are detected
Remote 
Loopback for slave cabinetReserved for future useFFl 8R 4# (5)# It 61 (0 or l)#
Yellow Alarm Send for slave cabinetNo (0), Yes (1)FFl 8# 4# (5)X 15 78 (0 or l)#
Flash Key Operation for slave cabinetRelease and reseize (0), future useFFl 85 41 (5)# 11 81 (0 or l)#
(1)
Red Alarm Detection for slave cabinetSee Section 400, (9 -2)FFl 8X 46 (5)R 2R l# (O-5)6
Yellow Alarm Detection for slaveSee Section 400, (50 
ms - 1)FF1 81 41 (5)C 2# 2# (O-15)R
cabinet
Yellow Alarm Recovery for slave
cabinet
Other Alarms Detection for slave
cabinet
Other Alarms Recovery for slave
cabinetSee Section 400, (10 
ms- 1)
See Section 400, (250 ms - 1)
See Section 400, (250 ms - 1)
FFl 8R 4X (5)# 2% 3R (0-15)#
FFl 8R 4P (5)R 2R 4# (0-15)Y
FFl 8R 45 (5)R 25 5# (O-15)5
Frame Loss Counter for slave cabinet
O-9000FFl 8# 4R (5)R 3R l# (O-
9000)#
Slip Counter for slave cabinet
O-9000FFl 81 4f (5)X 3# 25 (O-
9000)R
Red Alarm Counter for slave cabinet
O-9000FFl 8# 4R (5)R 31 3# (O-
9000)#
Loss of Signal Counter for slave
cabinet
Sync Loss Counter for slave cabinet
O-9000FFl 81 4X (5)% 3R 4R (O-
9000)R
O-9000FFl 8# 4Y (5)R 35 55 (O-
9000)X
Yellow Alarm Counter for slave
O-9000FFl 8C 45 (5)R 3f 65 (O-
cabinet9000)#
16DBS-80-450Issued 6/28/96 
						

							lhese rorms may be repromceu as needea ey cerutiecl UBS Healers ana ‘I‘ecnmcians.PARAMETER
IPOSSIBLE ENTRYIPROGRAM1 SETTING 11IIYellow Alarm Relay for slave cabinet
1 011 (Oh On (1)1 Rl W 4R (5)# 4C 1R (Oorl)# 1I
Red Alarm Relay for slave cabinet1 Off (Oh On (1)1 IT1 8# 4# (5)X 4# 21 (0 or 1)# II
6ync Loss Relay for slave cabinet1 Off (Oh On (1)1 FFl 8x 4X (5)# 4# 3R (0 or l)# 1I
Frame Loss Relay for slave cabinetI Off (0), On (1)1 Rl 8# 4# (5)R 4# 4# (0 or 1)R II
AIS Relay for slave cabinet1 Off (0). On (1)1 Rl 84 4R (5)R 41 5# (0 or l)# I
Relay Reset for slave cabinet
I
Automatically cleared (0)
Manually cleared (1)I
FFl 8#4#(5)#4#6#(Oorl)#I 1
Trunk Mode
I
Incoming and outgoing (0), Outgoing
I
FFl 6% 41 6P (l-64)R 5R (Oor
0W (1)vRobbed 
6ii SettingRobbed Bit Off, Robbed Bit On (1)FFl 8# 4% 6% (l-64)# 6R (0 or
l)#Incoming Dialing Method1 
(DTMF)FFl 8111 4X 6# (1-64)X 7R (0 or
w
Dial Tone TransmissionReserved for future useFFl 8# 4# 6P (l-64)# 8# (Oor
w
Busy Tone TransmissionReserved for future useAl 8# 4P 6R (l-64)R 9#r (0 or
wDial Tone Receive
Off(O), On (1)Al 
8# 4P 6R (l-64)XlO#(Oor
w
Ringback Tone TransmissionOff (Oh On (1)Rl 85 4/ 6P (l-64)#11#(Oor
1v1
Tl Trunk Closure
I
0 (Open)
I
FFl 8R 7% (W)P (l-4)# (l-8)R(0 or 
l)#I I
Issued 
6/28/96DBS-80-45017