Home
>
Panasonic
>
Communications System
>
Panasonic Cpc+AII/B Digital Business System Release Notes Manual
Panasonic Cpc+AII/B Digital Business System Release Notes Manual
Have a look at the manual Panasonic Cpc+AII/B Digital Business System Release Notes Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Section 400-Programming Chapter 7. Toll Restriction (FF7) Special Office Code Table For TRS Types 3-6 Sdftware Version: All VersionsAddress: FF7 5## (l-4)# (000-999)# (0 or l)# - - DescriptionEach of the four special area codes entered in the previous address (FF7 4##)can be tied with one or more special offke codes using this address. Each special area code can be matched to office codes (000-999). And. each office code can be individually allowed or denied. Typically. “976”, “555” or other office codes representing pay-for-call services are entered as special office codes.These special area/office code combinations will apply to TRS types 3-6. NOTE: If at a later date you wish to reset all the special office codes assigned to a special area code, use the Global Copy address (FF7 9# 13- 16#)to do it all at once, instead of resetting each individual office code here. Programming I FF7 5# (l-4)# (000-999)# (0 or l)# fAItSpecial Area CodeSpecial Office Code O=Allow dialing.Entry No. (see(an unlimited number l=Deny dialing. FF7 4## address)of office codes can be ,assigned to each Special Area Code) Defaults -- Special Area Codes1and2:1(Deny)Special Area Codes3and4:0(Allow) Related ProgrammingSpecial Area Code Table for TRS Types 3-6: FF7 4# (1-4)# (000-999%Special Office Code Table for TRS Types 3-6 (Global Copy): FF7 9# (13-16)# (0 or l># DBS-70-400DBS Manual - Issued 8/l/95Page 7-19
Chapter 7. Toll Restriction (FF7)Section 400-Programming Special ‘T-Digit Table For TRS Types 2-6 Software Version: All VersionsAddress: FF7 6# (l-50)# (0000000-9999999)# DescriptionUse this program to set up a table of up to 50 restricted 7-digit numbers for trunks assigned TRS types 2-6. These 7-digit numbers are restricted for all area codes. The “l-Digit Toll Restriction For TRS Types 2-6” address (FF7 l# 12-16#) determines whether this table is checked or not. Programming To assign a special 7-digit number . . .FF7 6# (I-50)# (0000000-9999999)# 4 It Entry No. of Special 7-Digit Number 7-D& Number To clear a special 7-digit number . . .FF7 6# (MO)# ,CONF ON/OFF f Entry l\io. of Special 7-Digit NumberRelated Programming 7-Digit Toll Restriction For TRS Types 2-6:FF7 l# (12-16)# (0 or l)# Page 7-20DBS Manual - Issued 8/l/95DBS-70-400
Section 400-ProgrammingChapter 7. toll Restriction (FF7) Day TRS Types O-7 for Trunks Software Version: All VersionsAddress: FF7 7# (ExtPort)# (Trunk)# (017)# DescriptionUse this program to assign TRS types to the trunks on an individual extension. The assigned TRS type will apply to the trunk during “Day” mode. For a review of TRS types, see “An Overview of Toll Restrictions” on page 7-2. Programming IFF7 7# (11144)# (l-33 or l-65)# (017)# ff t Extension PortTrunkTRS Type O-7Default: 7 (all calls allowed) Note: Enter “65” (for CPC-AIL/B) or “33” (for CPC-A) to apply all trunks to the TRS type. Related Programming Toll Restriction: all FF7 addresses DBS-70-400DBS Manual - Issued 8/l/95Page 7-21
Night TRS Types O-7 for Trunks So-are Version: All VersionsAddress: FF7 8# (ExtPort)# (Trunk)# (O-7)# DescriptionUse this program to assign TRS types to the trunks on an individual extension. These TRS types will apply when the system is in “Night” and “Night 2” mode. For a review of TRS types, see “An Overview of Toll Restrictions” on page7-2. ProgrammingFF7 8# (I-144)# (l-33 or l-65)# (017)# ff t Extension TortTrunkTRS Type O-7 Default: 7 (all calls allowed) Note: Enter “65” (for CPC-AII/B) or “33” (for CPC-A) to apply all trunks to the TRS type. Related ProgrammingAutomatic Night Mode Start Time: FFl 3# l# HHMM# Automatic Night 2 Mode Start Time: FFl 3# 30# HHMM# Toll Restriction: all F’F7 addresses Page 7-22DBS Manual - issued 8/l/95DBS-70-400
Section 400-Programming Chapter 7. Toll Restriction (FF7) Area Code Table For TRS Types 3-6 (Global Copy) Software Version: All VersionsAddress: FR 9# (l-4)# (0 or l)#Description Use this address to allow or deny all area codes for TRS types 3-h.Programming FF7 9# (l-4)# (0 or I)# 4I TRS Types:O=Allow dialins. l=Type 3 1 =Deny dialing. 2=Type 4 3=Type 5Defaults -- 4=Type 6TRS Types 3 and 4: 1 (Deny) TRS Types 5 and 6: 0 (Allow) Related ProgrammingArea Code Table for TRS Types 3-h: FF7 2# (3-6)# KKKJ-939)# (0 or li#DBS-70-400DBS Manuai - issued 8/l/95Page 7-23
Chapter 7. Toll Restriction (FF7)Section 400-Programming Office Code Table For TRS Types 3-6 (Global Copy) Software Version: All VersionsAddress: FF7 9# (58)# (0 or l)# DescriptionUse this address to allow or deny all office codes for TRS types 3-6. Programming 11FF7 9# (58)# (0 or l)# f TRS Types: 5=Type 3 6=Type4 7=Type5 8=Type6 O=Aliow dialing. l=Deny dialing. Defaults -- TRS Type 3: 1(Deny) TRS Types 4,5and 6: 0(Allow) Related Programming Office Code Table for TRS Types 3-6: FF7 3# (3-6)# (000-999)# (0 or l)# Page 7-24DBS Manual - Issued 8/l/95DBS-70-400
Section 400-ProgrammingChapter 7. Toll Restriction (FF7) Area & Office Code Table for TRS Types 3-6 (Global COPY) Software Version: All VersionsAddress: FR 9# (9~12)# (0 or l)## DescriptionUse this address to allow or deny all area codes Ir[Ltd office codes for TRS types 3-6. ProgrammingFF7 9# (9~12)# (0 or I)# TRS Types: 9=Type 3 lO=Type4 ll=Type5 12=Type6 O=Allow dialing. l=Deny dialing. Defaults -- TRS Type 3:1 (Deny) TRS Type 4:1 (Deny) for A/C* and 0 (Allow) for O/Cs TRS Types 5and 6: 0 (Allqw) 1 Related Programming Area Code Table For TRS Types 3-6: FF7 2# (3-6)# (000-999)# (0 or l)# Office Code Table For TRS Types 3-6: FF7 3# (3-6)# (000-999)# (0 or l)#DBS-70-400 DBS Manual - Issued 8/l/95Page 7-25
Chapter 7. Toll Restriction (FF7)Section 400-Programming Special Office Code Table For TRS Types 3-6 (Global COPY) Software Version: -AlI VersionsAddress: FF7 9# (13016)# (0 or l)# DescriptionUse this address to allow or deny the Special Area/Office Code combinations set in FF7 4# and 5#. Special Office Code Table (Global Copy) resets all office codes assigned to a Special Area Code at the same time (instead of resetting the office codes individually in FF7 5#). Special area/office code combinations apply to TRS types 3-6. ProgrammingFF7 9#(13.16)#(0 or l)# Special Area Code Entry Nos:O=Allow 13=Special Area Code 1 14=Special Area Code 2 l=Deny 15=Special Area Code 3Defaults: ’16=SpecialAreaCode4SpecialA/Cs1and2:1(Deny) SpecialA/Cs3and4:0(Allow) Related Programming Special Area Code Table For TRS Types 3-6: FF7 4# (l-4)# (000-999)# Special Office Code Table For TRS Types 3-6:FF7 5# (l-4)# (000-999)# (0 or l)# Page 7-26DBS Manual - issued 8/i/95DBS-70-400
8. Least Cost Routing (FF8) Use the FF8 addresses in this chapter to set up Least Cost Routing (LCR). This chapter covers the following addresses: FF8 Address An Overview of Least Cost Routing TopicPage Before Programming LCR8-2 I LCR Setup8-2 Activating LCR8-4 LCR Call Processing8-4 Using LCR With a PBX System8-5 1 FF8 I# (Tab1eNo.M (AreaCode)# (0 or l)#1 LCR Area Codes18-6 I FF8 2# (TableNo.)# (OfficeCode)# (0 or l)#I LCR Office Codes18-7 1 FF8 3# (EntryNo.)# (AreaCodeF( Special LCR Area Codes18-8 1 FF8 4# (Ent.ryNo.)# (Tab1eNo.W (OfficeCodeMSpecial LCR Off ice Code Tables8-9 (0 or I)#FF8 5# (TableNo.)# (Position)# (TrunkGroupWTime Priority Route Tables8-10 FF8 6# (TrunkGroup)# (Position)# (Trunk)# FF8 7# (TrunkGroup)# (DigitshYFF8 8# (TrunkGroup)# (Digits)# LCR Trunk Groups8-12 LCR Delete Tables8-13 LCR Add Tables8-14DBS-70-400DBS Manual - Issued 8/l/95Page 8-l
An Overview of Least Cost Routing With the Least Cost Routing (LCR) feature, you can program the DBS system to automatically route outgoing calls to the least expensive carrier. Before Programming LCR lVerify the carrier for each CO trunk in the system, and which carriers provide the best rates at different times of the day or weekend -- check the site’s phone bills for call history. lCut Strap S 1 on the CPC card. See Section 300-Installation for instructions. lEnable LCR for the system in FFl 2# l# 3# (set to “1”). LCR SetUpUse FF8 addresses to set up LCR in the following logical order: Step 1: Build LCR Trunk Groups FF8 6# (TrunkGroup)# (Position)# (Trunk)# Assign trunks to each group, prioritizing the trunks by assigning them to positions within the group (trunk in position 1 will be tried first, then trunk in ’ position 2, etc.). To prevent glare, assign the trunks in descending order by port number (from highest to lowest -- e.g., trunk port 7 in the first position, trunk port 6 in the second position, etc.). Maximum 8 trunk groups. Maximum 8 positions (trunks) per group. Example: Create three trunk groups -- Trunk Group 1 for trunks that will be used for local calls; Trunk Group 2 for long-distance trunks; and Trunk Group 3 for backup trunks. Step 2: Build Time Priority Route TablesFF8 5# (TableNo.)# (Position)# (TrunkGroup)# Assign trunk groups to positions within each Time Priority Route Table, which has six time-of-day periods (see Table 8-1, next page). These time ’ periods are fixed and can’t be changed. Each time period has eight different positions for trunk groups. Maximum 15 Time Priority Route Tables. Example:Create two Time Priority Route Tables -- Table 1 for long- distance calls; Table 2 for local calls. lFor Table 1 (long-distance), assign Trunk Group 2 to positions I, 9, 17,25,33 and 41, so that these trunks will be tried fist in all time periods for long-distance calls. In positions 2, 10, 18,26, 34 and 42, assign Trunk Group 3 (backup). lFor Table 2 (local), assign Trunk Group 1 to positions 1,9, 17, 25,33 and 41, so that these trunks will be tried first in all time periods for local calls. In positions 2, 10, 18,26,34 and 42, assign Trunk Group 3 (backup). Page 8-2 DBS Manual - Issued 8/l/95DBS-7d-400