Sharp Mx 3501 N Manual

							32
MAC OS X (v10.3.3 TO 10.4)
14Configure the printer driver.
(1) Select [AppleTalk].
 If multiple AppleTalk zones are displayed, select 
the zone that includes the printer from the menu.
 If you are using Mac OS X v10.4, click the 
[Default Browser] icon.
(2) Click the machines model name.
The machines model name usually appears as 
[SCxxxxxx]. (xxxxxx is a sequence of characters 
that varies depending on your model.)
(3) Select [Auto Select].
If you are using Mac OS X v10.4, make sure that 
the PPD file of your model is selected.
(4) Click the [Add] button.
The PPD file of the machine is automatically 
selected and the peripheral devices installed on the 
machine are detected and automatically configured.
15Display printer information.
(1) Click the machines name.
(2) Click [Show Info].
16Select the machine configuration.
If you selected [Auto Select] in (3) of step 14, the 
machine configuration is detected and automatically 
configured. Check the configured settings to make sure 
they are correct.
(1) Select [Installable Options].
(2) Select the options that are installed on 
the machine.
(3) Click the [Apply Changes] button.
(4) Click to close the window.
This completes the configuration of the printer 
driver.
 [IP Printing] can be selected (in Mac OS X v10.4 the 
[IP Printer] icon can be clicked) in (1) to print to the 
machine over a network using the IPP function. 
When the machine is in a remote location, this 
function can be used in place of the fax function to 
print a higher quality image than a fax. If you wish to 
use the IPP function, follow these steps to configure 
the printer driver.
(1) Select [Internet Printing Protocol] in Printer 
Type (Protocol in Mac OS X v10.4). Enter the 
address of the machine (IP address or domain 
name) and the Queue Name (enter ipp in 
Queue Name).
(2) Select [Sharp] in Printer Model (Print Using 
in Mac OS X v10.4) and click the PPD file of 
your model.
(3) Click the [Add] button.
 The PPD file is installed in the following folders on 
the startup disk.
[Library] - [Printers] - [PPDs] - [Contents] - 
[Resources] - [en.lproj]
(1)
(2)
(4)
(3)
You can check the options that are installed on the 
machine by printing out the All Custom Setting List in 
the system settings. (However, note that Input Tray 
Options must be set to the number of trays on the 
machine.) Follow these steps to print the All Custom 
Setting List:
Press the [SYSTEM SETTINGS] key, touch the [List 
Print (User)] key, and then touch the [All Custom 
Setting List] key.
(1)
(2)
(1)
(3)
(2)
(4)
!mx4500_us_ins.book  32 ページ  ２００５年１０月３１日　月曜日　午前１１時５７分 
						

							33
MAC OS X (v10.2.8)
If Mac OS X v10.2 has not been updated to version 10.2.8, be sure to update to version 10.2.8 before installing the PPD 
file. For information on how to update, see the Help file on your Macintosh computer.
1Insert the Software CD-ROM into your 
computers CD-ROM drive.
Insert the Software CD-ROM that shows Disc 2 on the 
front of the CD-ROM.
2Double-click the [CD-ROM] icon ( ) on 
the desktop.
3Double-click the [MacOSX] folder.
4Double-click the [Version 10.2] folder.
5Double-click the [MX-PBX1] icon ( ).
6Click the [Continue] button.
7The License Agreement window will 
appear. Make sure that you understand 
the contents of the license agreement 
and then click the [Continue] button.
A message will appear asking you if you agree to the 
terms of the license. Click the [Agree] button.
8Select the hard drive where the PPD file 
will be installed and click the [Continue] 
button.
Be sure to select the hard drive on which your operating 
system is installed.
9Click the [Install] button.
Installation begins.
10When the message The software was 
successfully installed appears in the 
installation window, click the [Close] 
button.
This completes the installation of the software. Next, 
configure the printer driver settings.
If the Authenticate window appears, enter the 
password and click the [OK] button.
If the license appears in the different language, 
change the language in the language menu.
!mx4500_us_ins.book  33 ページ  ２００５年１０月３１日　月曜日　午前１１時５７分 
						

							34
MAC OS X (v10.2.8)
11Select [Applications] from the [Go] 
menu.
12Double-click the [Utilities] folder.
13Double-click the [Print Center] icon ( )
14Click [Add].
15Configure the printer driver.
(1) Select [AppleTalk].
If multiple AppleTalk zones are displayed, select the 
zone that includes the printer from the menu.
(2) Click the machines model name.
The machines model name usually appears as 
[SCxxxxxx]. (xxxxxx is a sequence of characters 
that varies depending on your model.)
(3) Select [Sharp].
(4) Click the PPD file for your model.
(5) Click the [Add] button.
If this is the first time you are configuring the printer 
driver on your computer, a message to confirm the 
addition of a printer will appear. Click the [Add] button.
 [IP Printing] can be selected in (1) to print to the 
machine over a network using the IPP function. 
When the machine is in a remote location, this 
function can be used in place of the fax function to 
print a higher quality image than a fax. If you wish to 
use the IPP function, follow these steps to configure 
the printer driver.
(1) Enter the address of the machine (IP address or 
domain name) in Printers Address.
(2) Select [Sharp] in Printer Model and click the 
PPD file of your model.
(3) Click the [Add] button.
 The PPD file is installed in the following folders on 
the startup disk.
[Library] - [Printers] - [PPDs] - [Contents] - 
[Resources] - [en.lproj]
(1)
(2)
(4)
(5)
(3)
!mx4500_us_ins.book  34 ページ  ２００５年１０月３１日　月曜日　午前１１時５７分 
						

							35
MAC OS X (v10.2.8)
16Click the name of the machine in the 
Printer List window.
17Select [Show Info] from the [Printers] 
menu.
18Select the machine configuration.
(1) Select [Installable Options].
(2) Select the options that are installed on 
the machine.
(3) Click the [Apply Changes] button.
(4) Click to close the window.
This completes the configuration of the printer 
driver.
You can check the options that are installed on the 
machine by printing out the All Custom Setting List in 
the system settings. (However, note that Input Tray 
Options must be set to the number of trays on the 
machine.) Follow these steps to print the All Custom 
Setting List:
Press the [SYSTEM SETTINGS] key, touch the [List 
Print (User)] key, and then touch the [All Custom 
Setting List] key.
(1)
(3)
(2)
(4)
!mx4500_us_ins.book  35 ページ  ２００５年１０月３１日　月曜日　午前１１時５７分 
						

							36
MAC OS X (v10.1.5)
If Mac OS X v10.1 has not been updated to version 10.1.5, be sure to update to version 10.1.5 before installing the PPD 
file. For information on how to update, see the Help file on your Macintosh computer.
1Insert the Software CD-ROM into your 
computers CD-ROM drive.
Insert the Software CD-ROM that shows Disc 2 on the 
front of the CD-ROM.
2Double-click the [CD-ROM] icon ( ) on 
the desktop.
3Double-click the [MacOSX] folder.
4Double-click the [Version 10.1] folder.
5Double-click the [MX-PBX1] icon ( ).
6Click the [Continue] button.
7The License Agreement window will 
appear. Make sure that you understand 
the contents of the license agreement 
and then click the [Continue] button.
A message will appear asking you if you agree to the 
terms of the license. Click the [Agree] button.
8Select the hard drive where the PPD file will 
be installed and click the [Continue] button.
Be sure to select the hard drive on which your operating 
system is installed.
9Click the [Install] button.
Installation begins.
10When the message The software was 
successfully installed appears in the 
installation window, click the [Close] button.
This completes the installation of the software. Next, 
configure the printer driver settings.
11Select [Applications] from the [Go] 
menu.
If the Authorization window appears, click the lock 
icon ( ), enter the password, and click the [OK] 
button.
If the license appears in the different language, 
change the language in the language menu.
!mx4500_us_ins.book  36 ページ  ２００５年１０月３１日　月曜日　午前１１時５７分 
						

							37
MAC OS X (v10.1.5)
12Double-click the [Utilities] folder.
13Double-click the [Print Center] icon ( ).
14Click the [Add Printer] button.
15Configure the printer driver.
(1) Select [AppleTalk].
If multiple AppleTalk zones are displayed, select the 
zone that includes the printer from the menu.
(2) Click the machines model name.
The machines model name usually appears as 
[SCxxxxxx]. (xxxxxx is a sequence of characters 
that varies depending on your model.)
(3) Select [Other].
16Select the PPD file of the machine.
(1) Click the PPD file for your model.
Click [Startup disk name] - [Library] - [Printers] - 
[PPDs] - [Contents] - [Resources] - [en.lproj], and 
then select the PPD file for your model.
(2) Click the [Choose] button.
17Click the [Add] button.
This completes the configuration of the printer 
driver.
If this is the first time you are configuring the printer 
driver on your computer, a message to confirm the 
addition of a printer will appear. Click the [Add] button 
and go to step 15.
[LPR Printers using IP] can be selected in (1) to print 
to the machine over a network using the IPP function. 
When the machine is in a remote location, this 
function can be used in place of the fax function to 
print a higher quality image than a fax. If you wish to 
use the IPP function, follow these steps to configure 
the printer driver.
(1) Enter the address of the machine (IP address or 
domain name) in LPR Printers Address.
(2) Select [Other] in Printer Model.
(1)
(2)
(3)
(1)
(2)
!mx4500_us_ins.book  37 ページ  ２００５年１０月３１日　月曜日　午前１１時５７分 
						

							38
MAC OS 9.0 TO 9.2.2
1Insert the Software CD-ROM into your 
computers CD-ROM drive.
Insert the Software CD-ROM that shows Disc 2 on the 
front of the CD-ROM.
2Double-click the [CD-ROM] icon ( ) on 
the desktop.
3Double-click the [MacOS] folder.
4Double-click the [Installer] icon ( ).
5Click the [Install] button.
6The License Agreement window will 
appear. Make sure that you understand 
the contents of the license agreement 
and then click the [Yes] button.
7Read the message in the window that 
appears and click the [Continue] 
button.
Installation of the PPD file begins.
After the installation, a message prompting you to restart 
your computer will appear. Click the [OK] button and 
restart your computer.
This completes the installation of the software. Next, 
configure the printer driver settings.
8Select [Chooser] from the Apple Menu.
9Create a printer.
(1) Click the [LaserWriter 8] icon.
If multiple AppleTalk zones are displayed, select the 
zone that includes the printer.
(2) Click the machines model name.
The machines model name usually appears as 
[SCxxxxxx]. (xxxxxx is a sequence of characters 
that varies depending on your model.)
(3) Click the [Create] button.
If you are using Mac OS 9.0 to 9.2.2, make sure that LaserWriter 8 has been installed and that the LaserWriter 8 
checkbox is selected   in Extensions Manager in Control Panels. If not, install it from the system CD-ROM supplied with 
your Macintosh computer.
(2)
(3)
(1)
!mx4500_us_ins.book  38 ページ  ２００５年１０月３１日　月曜日　午前１１時５７分 
						

							39
MAC OS 9.0 TO 9.2.2
10Select the PPD file.
(1) Click the PPD file for your model.
(2) Click the [Select] button.
11Make sure that the machine is selected 
in the Select a PostScript Printer list 
and then click the [Setup] button.
12Click the [Configure] button.
13Select the machine configuration.
(1) Select the options that are installed on 
the machine.
(2) Select [Options 2] from the menu to 
change the screen and continue 
selecting the options that have been 
installed on the machine.
In the [Options 2] screen, select whether or not a 
Right Tray is installed.
(3) Click the [OK] button.
14Click the [OK] button in the window of 
step 12 to close the window.
15Click the close box ( ) to close the 
Chooser.
This completes the configuration of the printer 
driver.
You can install the screen fonts from the PRINTER 
UTILITIES CD-ROM that accompanies the PS3 
expansion kit. See INSTALLING THE PS DISPLAY 
FONTS (page 40).
 If the above dialog box does not appear and you 
return to the Chooser dialog box, follow these 
steps to select the PPD file manually.
(1) Make sure that the machine is selected in the 
Select a Post Script Printer list, and then click 
the [Setup] button followed by the [Select PPD] 
button.
(2) Select the PPD file for your model and click the 
[Open] button.
(3) Click the [OK] button.
 The PPD file is installed in the [Printer Descriptions] 
folder in the [Extensions] folder.
To automatically configure the settings based on the 
installed machine options that are detected, click the 
[Auto Setup] button.
(1)
(2)
You can check the options that are installed on the 
machine by printing out the All Custom Setting List in 
the system settings. (However, note that Input Tray 
Options must be set to the number of trays on the 
machine.) Follow these steps to print the All Custom 
Setting List:
Press the [SYSTEM SETTINGS] key, touch the [List 
Print (User)] key, and then touch the [All Custom 
Setting List] key.
(2)
(1)
(3)
!mx4500_us_ins.book  39 ページ  ２００５年１０月３１日　月曜日　午前１１時５７分 
						

							40
This chapter explains how to install PS display fonts and how to change the printer driver port in Windows.
INSTALLING THE PS DISPLAY FONTS
Fonts that can be used by the PS printer driver are contained on the PRINTER UTILITIES CD-ROM that accompanies 
the PS3 expansion kit. Install these fonts as needed for the PS printer driver.
WINDOWS ENVIRONMENT
1Insert the PRINTER UTILITIES 
CD-ROM that accompanies the PS3 
expansion kit into your computers 
CD-ROM drive.
2Click the [start] button, click [My 
Computer] ( ), and then double-click 
the [CD-ROM] icon ( ).
If you are using Windows 98/Me/NT 4.0/2000, 
double-click [My Computer], and then double-click the 
[CD-ROM] icon.
3Double-click the [Setup] icon ( ).
4The SOFTWARE LICENSE window 
will appear. Make sure that you 
understand the contents of the license 
agreement and then click the [Yes] 
button.
5Read the message in the Welcome 
window and then click the [Next] 
button.
6Click the [PS Display Font] button.
7Follow the on-screen instructions.
8Click the [Close] button in the screen of 
step 6.
4
USEFUL INFORMATION
!mx4500_us_ins.book  40 ページ  ２００５年１０月３１日　月曜日　午前１１時５７分 
						

							41
INSTALLING THE PS DISPLAY FONTS
MACINTOSH ENVIRONMENT (Mac OS 9.0 to 9.2.2)
Macintosh screen fonts are contained in the [Font] folder of the PRINTER UTILITIES CD-ROM that accompanies the 
PS3 expansion kit. Copy the fonts that you wish to install to the [System Folder] of the startup disk.
If you experience problems that may be due to the installed screen fonts, immediately delete the installed fonts from the 
system.
!mx4500_us_ins.book  41 ページ  ２００５年１０月３１日　月曜日　午前１１時５７分